Skip to main navigation
Skip to secondary navigation
Skip to search
Skip to content

Scientists processing machines and processing technology

Porträtfoto von Professor Jens-Peter Majschak

Prof. Dr.-Ing. Jens-Peter Majschak

Send Email

work

Visiting address:

Hauptgebäude ZIN, ZIN 103 Bergstr. 120

01069 Dresden

postal

Postal address:

TUD Dresden University of Technology Fakultät Maschinenwesen
Institut für Naturstofftechnik

01062 Dresden

work Tel.
work Tel.

Sekretariat: Heidelinde Siegert

more details

Berthold, Lena; Dipl.-Ing.

Foto: Porträt Lena Berthold

Processing Systems

Dipl.-Ing. Lena Berthold

Forming of Fibre Based Materials

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, room 224 Bergstraße 120

01069 Dresden

Germany

work Tel.

Research

3D-Forming of fibre based materials
project Commisioning of Intelligent Production Systems
project InfraKart: Moisture measurement with organic infrared detectors to control paperboard processing machines
humidification and absorption behaviour of paperboard materials

Publications

1 Entries

2022

Effect of Blank Moisture Content on Forming Behaviour and Mechanical Properties of Paperboard Tray PackagesNiini, A., Berthold, L., Müller, T., Tanninen, P., Majschak, J., Varis, J. & Leminen, V., 2022, In: Journal of Applied Packaging Research. 2022, 1, 4Electronic (full-text) versionResearch output: Contribution to journal > Research article

Britzke, Max; Dr.-Ing. Dipl.-Wi.-Ing.

Platzhalter für Portraitbild

Processing Systems

Dr.-Ing. Dipl.-Wi.-Ing. Max Britzke

Research Field Coordinator

Send Email

Chair of Processing Machines and Processing Technology

work

Visiting address:

Hauptgebäude ZIN, ZIN 222 Bergstraße 120

01069 Dresden

work Tel.

Publications

1 bis 28 von 28 Einträgen

Britzke, Max; Rosenbusch, Phillip: Adhesive free paper honeycomb core and related manufacturing process for use in environmentally friendly sandwich panels. In: International Panel Products Symposium (IPPS) 2019 proceedings (2019)

Britzke, Max; Rosenbusch, Phillip: Neuartige, klebstofffreie Papierwabenstruktur. In: Tagungsunterlagen zum IGEL-Leichtbausymposium 2019 (2019)

Britzke, M.; Herold, J.; Lippitsch, S.: Aktuelle Prüfmethoden für moderne Leichtbauwerkstoffe im Möbel- und Innenausbau. In: holztechnologie 56 (2015), Nr. 1, S. 45–50

Britzke, M.; Herold, J.; Korn, C.; Wagenführ, A.: Development of a 3D formable wood based material (Holzformblech). In: Proceedings of the 10th International Conference “Wood Science and Engineering in the Third Millennium” (ICWSE 2015), Brasov, Rumänien, 05.-07.11.2015 (2015)

Britzke, M.; Herold, J.; Lippitsch, S.: Aktuelle Bearbeitungstechnologien und Prüfmethode für moderne Leichtbauwerkstoffe im Möbel- und Innenausbau. In: Tagungsband 16. Holztechnologisches Kolloquium Dresden (2014)

Herzberg, M.; Britzke, M.; Herold, J.; Korn, C.; Lippitsch, S.: Three-dimensional Formable Paper Honeycomb Core for Lightweight Sand-wich Parts. In: Tagungsband Think Light – International Conference on Lightweight Panels, Hannover (2013)

Herold, J.; Britzke, M.; Lippitsch, S.; Wagenführ, A.: Möbelkonstruktion in Leichtbauweise optimieren – Teil 3: Neue Prüfmethoden zur Bewertung lokaler Eigenschaften von Sandwichplatten. In: Holz-Zentralblatt 139 (2013), Nr. 8, S. 205–206

Herold, J.; Britzke, M.; Wagenführ, A.: Möbelkonstruktion in Leichtbauweise optimieren – Teil 2: Werkstoffanalyse von Sandwichplatten bei lokaler Beanspruchung. In: Holz-Zentralblatt 139 (2013), Nr. 4, S. 108

Herold, J.; Britzke, M.; Wagenführ, A.: Möbelkonstruktion in Leichtbauweise optimieren – Teil 1: Untersuchung der Schnittstelle zwischen Werkstoff und Beschlag – Stand der Technik. In: Holz-Zentralblatt 139 (2013), Nr. 2, S. 55–56

Britzke, M.; Lippitsch, S.; Korn, C.; Wagenführ, A.: Entwicklung eines Verfahrens zur Herstellung 3D-formbarer Wabenkerne als Mittellage für Sandwichverbundbauteile. In: Tagungsband des 10. IHD-Holzwerkstoffkolloquium „Innovationen binden – Wert statt Wachstum“ (2013)

Britzke, Max; Herold, Jan; Wagenführ, André: Anforderungen an die Verklebung leichter Möbel-Sandwichplatten. In: Tagungsband des Kooperationsforum „Kleben von Holz und Holzwerkstoffen“, Juliusspital Würzburg (2012)

Beck, Curt; Korn, Christian; Britzke, Max; Herold, Jan; Wagenführ, André: Neue Ansätze zum Spiralwickeln: Weiterentwicklung der Wickeltechnologie zur Herstellung leichter Hülsen in Sandwichbauweise. In: Tagungsband des 2. Möbelleichtbau-Symposiums an der Hochschule Ostwestfalen-Lippe (2012)

Britzke, Max; Siegel, Carolin; Wagenführ, André: Three-dimensional formed sandwich parts for interior applications. In: Proceedings of the 14th International Panel Products Symposium IPPS 2011, Llandudno, Großbritannien (2011)

Britzke, Max: Ein Verfahren zur kontinuierlichen Herstellung leichter Sandwichplatten. In: Tagungsband des 9. Holzwerkstoff-Kolloquium „Klasse statt Masse“, Dresden (2011)

Britzke, M.; Wagenführ, A.: Sandwichplatten mit Papierwabenkern für den Möbel- und Innenausbau – Plattenbauweisen und Herstellungsverfahren – Teil 2: Verfahren zur Plattenherstellung. In: holztechnologie 52 (2011), Nr. 2, S. 32–37

Britzke, M.; Wagenführ, A.: Sandwichplatten mit Papierwabenkern für den Möbel- und Innenausbau – Plattenbauweisen und Herstellungsverfahren – Teil 1: Leichtbau und Papierwabenkerne. In: holztechnologie 52 (2011), Nr. 1, S. 27–30

Britzke, M.; Herold, J.; Korn, C.; Delenk, H.; Wagenführ, A.: New ideas for producing and processing lightweight furniture sandwich panels. In: Proceedings of the International Conference on Lightweight Panels „Think Light“, Hannover, 2011 (2011)

Britzke, Max ; André, Wagenführ (Hrsg.): Entwicklung einer kontinuierlich herstellbaren Sandwichplatte mit Papierwabenkern. Schriftenreihe Holz- und Papiertechnik, Band 8. Dresden : Selbstverlag, Institut für Holz- und Papiertechnik (2011). - ISBN 978-3-86780-255-0

Wagenführ, A.; Britzke, M.: Verfahrens- und Technologieentwicklung für den Möbel- und Innenausbau: Kontinuierliche Herstellung von Sandwich- Leichtbauplatten mit Papierwabenkern. In: Dresdner Transferbrief 18 (2010), Nr. 3, S. 22

Britzke, Max: Automatisierte Fertigungsverfahren für Sandwichplatten mit Papierwabenkern. In: Tagungsband des 1. Möbel-Leichtbau-Symposiums, Hochschule Ostwestfalen-Lippe in Lemgo (2010)

Britzke, Max; Herold, Jan; Korn, Christian; Wagenführ, André; Delenk, Hubertus; Flechtner, Anton: Continuous in-line production of sandwich panels with paper honeycomb core. In: Proceedings of the 14th European Conference on Composite Materials ECCM, Budapest (Ungarn) (2010)

Britzke, Max; Herold, Jan: Anforderungen an Sandwichplatten mit Papierwabenkern für den Möbel- und Innenausbau. In: Tagungsband 8. Möbeltage, Dresden (2010)

Britzke, Max; Herold, Jan; Korn, Christian; Wagenführ, André: The continuous production of sandwich panels with paper honeycomb core for furniture applications. In: Proceedings 13th International Panel Products Symposium IPPS 2009, Nantes (Frankreich) (2009)

Britzke, Max; Herold, Jan; Korn, Christian; Wagenführ, André: Konzepte für die Herstellung und Bearbeitung neuartiger, leichter Sandwichplatten mit dünnen Decklagen und Papierwabenkern. In: Tagungsband 7. Internationales Symposium „Werkstoffe aus nachwachsenden Rohstoffen“ Narotech 2009, Erfurt (2009)

Britzke, Max; Herold, Jan; Wagenführ, André: „Kehlnaht-Werkzeug“ als neue Technologie. In: HK Holz und Kunststoffbearbeitung 43 (2008), Nr. 6, S. 110

Britzke, Max; Herold, Jan; Wagenführ, André: Kräfte gezielt einleiten. In: HK Holz und Kunststoffbearbeitung 42/6 (2007), S. 40–45

Herold, J.; Rehm, K.; Kröppelin, U.; Britzke, M.: Neues Verfahren zum Erzeugen von Krafteinleitungspunkten in leichten Sandwichplatten mit Papierwabenkern. In: holztechnologie (2006)

Herold, J.; Rehm, K.; Kröppelin, U.; Britzke, M.: Temperaturverhalten von Thermoglättwerkzeugen. In: HOB Die Holzbearbeitung (2006)

Diese Informationen werden vom Vorgängersystem FIS bereitgestellt.

Bunk, Norbert; Dipl.-Ing.

Portät Norbert Bunk

Processing Systems

Dipl.-Ing. Norbert Bunk

Sealing and Forming of polymer Packaging Materials

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 220 Bergstr. 120

01069 Dresden

work Tel.

Publications

12 Entries

2022

Consideration of rheological processes during the welding of plastics by means of numerical simulation and microscopic analysesBunk, N., Majschak, J., Hüllmann, A. & Gehde, M., Oct 2022, In: Joining plastics = Fügen von Kunststoffen / Hrsg.: DVS, Deutscher Verband für Schweißen und Verwandte Verfahren e.V.. 2022, Issue 3, p. 174-181Electronic (full-text) versionResearch output: Contribution to journal > Research article
Charakterisierung und Modellierung des Phasenüberganges bei ThermoplastenBunk, N., 11 Mar 2022Research output: Contribution to conferences > Presentation slides

2021

Rheologische Vorgänge beim Schweißen (Schmelzefluss)Bunk, N., Hüllmann, A., Majschak, J. & Gehde, M., 4 Nov 2021Research output: Contribution to conferences > Paper
Rheologische Vorgänge beim Schweißen (Schmelzefluss)Bunk, N., Hüllmann, A., Majschak, J. & Gehde, M., 4 Nov 2021Research output: Contribution to conferences > Presentation slides
The effect of flexible sealing jaws on the tightness of pouches made from mono-polyolefin films and functional papersHauptmann, M., Bär, W., Schmidtchen, L., Bunk, N., Abegglen, D., Vishtal, A. & Wyser, Y., 6 Jan 2021, In: Packaging Technology and Science. 2021, 34(3), p. 175-186Research output: Contribution to journal > Research article

2020

The sealing behavior of new mono‐polyolefin and paper‐based film laminates in the context of bag form‐fill‐seal machinesHauptmann, M., Bär, W., Schmidtchen, L., Bunk, N., Abegglen, D., Wyser, Y. & Vishtal, A., 1 Nov 2020, In: Packaging Technology and Science. 2020, 34(2), p. 117-126Research output: Contribution to journal > Research article

2018

Process for stretching flat semifinished productsLudat, N. & Bunk, N., 16 Apr 2018Research output: Contribution to conferences > Presentation slides

2015

Prozesssimulation beim Siegeln und ThermoformenBach, S., Stein, M., Bunk, N. & Majschak, J., 2015, p. 237-250, 14 p.Electronic (full-text) versionResearch output: Contribution to conferences > Paper

2014

Influences of geometric parameters and materials on the tightness of ultrasonic sealed flexible packagesStein, M., Bunk, N., Bach, S. & Majschak, J., 2014Research output: Contribution to conferences > Presentation slides

2013

Effect of Laminate Structure and Morphology on Fracture Mechanics and Seam Strength of Sealed SeamsBach, S., Bunk, N. & Majschak, J., 2013Research output: Contribution to conferences > Presentation slides

Büttner, Stefan; Staatl. gepr. Techniker

Stefan Büttner

Stefan Büttner , Staatl. gepr. Techniker

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 102 Bergstr. 120

01069 Dresden

work Tel.

div Steuerelement

Heide, Matti; Dipl.-Ing.

Porträt Matti Heide

Cleaning Technologies

Dipl.-Ing. Matti Heide

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 221 Bergstr. 120

01069 Dresden

Germany

work Tel.

Research Focus

Chocolate-specific simulation model for flushing processes in closed systems – SchokoSIM

Publikationen

2 Entries

2023

Reduced cleaning model for highly viscous non-Newtonian fluids in pipelinesLiebmann, V., Heide, M., Köhler, H., Golla, C., Fröhlich, J. & Rüdiger, F., 18 Jul 2023, 33rd European Symposium on Computer Aided Process Engineering. Elsevier, p. 325-330, 6 p.Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution

2022

Aspects of Modelling the Cleaning of a Chocolate With Yield Stress in a Pipe Using CFDLiebmann, V., Heide, M., Schoppmann, K., Köhler, H. & Rüdiger, F., 2022, Proceedings of the International Conference on Fouling & Cleaning in Food Processing 2022Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution

Helbig, Manuel; Dipl.-Ing.

Porträt Manuel Helbig

Cleaning Technologies

Dipl.-Ing. Manuel Helbig

Wissenschaftlicher Mitarbeiter

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 102 Bergstr. 120

01069 Dresden

Germany

work Tel.

Research Focus

Factors influencing the cleaning processes in the food industry
Collaboration in the projects "Increasing the resource efficiency of cleaning processes in food industry with modular model soil - ReMoVe" and “Cleaning mechanisms of immerged systems”
Concluded projects:
“Optimizing of cleaning processes by means of process description and dimensionless numbers 1 + 2”, “Cleaning of Dead Spaces”, “Enhancement of cleaning-in-place efficiency using pulsed flow 1+ 2”, “Development of a water jet tester for verifications according to DIN EN ISO 16925 as a portable measuring device”

Teaching

Responsible for the following courses:
- Cleaning technology and industrial hygiene (MB-VTMB-28)
- Safety and hygiene aspects of processing machines (MB-VTMB-28)

Publications

16 Entries

2015

Local cleaning time measurements of food based soil in a sudden expansion: effects of process parametersHelbig, M., Föste, H., Augustin, W., Scholl, S. & Majschak, J., 2015, 11. International Conference on Heat Exchanger Fouling and Cleaning. p. 350, 356 p.Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution

2014

A comparison of local phosphorecence detection and fluid dynamic gauging methods for studying the removal of cohesive fouling layersGordon, P., Schöler, M., Föste, H., Helbig, M., Augustin, W., Chew, J., Scholl, S. & 2 others, 2014, In: Food and Bioproducts Processing. 92, p. 46-53, 8 p.Research output: Contribution to journal > Research article
A unified approach to classify removal processes of different soils using dimensionless numbersFöste, H., Helbig, M., Schulte, T., Rudolph, M., Majschak, J., Augustin, W. & Scholl, S., 2014, Fouling & Cleaning in Food Processing 2014 Green Cleaning. Cambridge, UKResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Design parameters of pulsed flow for enhanced CIP processesHelbig, M., Föste, H., Augustin, W., Scholl, S. & Majschak, J., 2014, Fouling & Cleaning in Food Processing 2014 Green Cleaning. Cambridge, UK, p. 340 - 348, 9 p.Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution

2013

Optimierung von CIP-Prozessen mittels pulsierender Strömung: Verbesserte Reinigungsleistung durch Steigerung der mechanisch wirkenden Strömungseffekte auf Ablagerungen in Rohrreinigungsprozessen.Helbig, M., Föste, H., Augustin, W., Scholl, S. & Majschak, J., 2013, In: Deutsche Molkerei-Zeitung : DMZ ; Lebensmittelindustrie und Milchwirtschaft ; offizielles Mitteilungsorgan der MUVA Kempten. 2013, 24, p. 26-29, 4 p.Research output: Contribution to journal > Short survey/review

2012

Local analysis of cleaning mechanisms in CIP processesSchöler, M., Föste, H., Helbig, M., Gottwald, A., Friedrichs, J., Werner, C., Augustin, W. & 2 others, Oct 2012, In: Food and Bioproducts Processing. 2012, 4, p. 858 - 866Electronic (full-text) versionResearch output: Contribution to journal > Research article

Hofmann, André; Dipl.-Ing.

Porträt André Hofmann

Processing Systems

Dipl.-Ing. André Hofmann

Forming of fibre-based Materials

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 224 Bergstr. 120

01069 Dresden

work Tel.

Research

ultrasonic treatment of fibre networks
forming of fibre networks with deep drawing anfd embioopssing technology
optimization of forming processes
development and optimization of tools and machinery for 3D-forming of fibre networks
recent projects
- Ultrasonic Enhanced Embossing - uSEE
- Untersuchungen zum ultraschallunterstützten Prägen von Lederwaren mit konventionellen Prägewerkzeugen und Prägewerkzeugen aus Kunststoff

Publications

8 Entries

2022

Influence of ultrasound on embossing results for cardboardHünniger, J., Engisch, L., käppeler, U., Hamblyn, S. & Hofmann, A., 22 Aug 2022, In: BioResources. 17, 4, p. 5803-5819, 17 p.Electronic (full-text) versionResearch output: Contribution to journal > Review article

2021

Chemical and morphological changes in fibre structure due to material heating during ultrasonic-assisted embossing of cardboardKäppler, U., Hünniger, J., Hofmann, A., Hamblyn, S., Berlich, A. & Engisch, L., 2021, In: BioResources. 16, 1, p. 546-557, 12 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2020

Material-dependent Ultrasonic Heating Behavior during the Reshaping of Dryed Paper WebsHofmann, A., Löwe, A. & Hauptmann, M., 2020, In: BioResources. 15, 3, p. 4947-4959, 13 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Thermal Influence on the Mechanical Properties of Cardboard during an Ultrasonic-Assisted Embossing ProcessKäppler, U., Hünniger, J., Hofmann, A., Berlich, A. & Engisch, L., 2020, In: BioResources. 15, 3, p. 5110-5121, 12 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Ultrasonic Induced Material Compression During the Gap-controlled Reshaping of Dry Paper Webs by Embossing or Deep DrawingHofmann, A. & Hauptmann, M., 2020, In: BioResources. 15, 2, p. 2326-2338, 13 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2019

Characterization of the material elongation in the deep drawing of paperboardHofmann, A., Wallmeier, M., Hauptmann, M. & Majschak, J., 2019, In: Packaging Technology and Science. 32, 6, p. 287-296, 10 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Temperature Development of Cardboard in Contact with High-Frequency Vibrating Metal SurfacesLöwe, A., Hauptmann, M., Hofmann, A. & Majschak, J., 2019, In: BioResources. 14, 2, p. 3975-3990, 16 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2017

The use and application of ultrasonic vibrations in the 3D deformation of paper and cardboardLöwe, A., Hofmann, A. & Hauptmann, M., 2017, In: Journal of Materials Processing Technology. 240, p. 23-32, 10 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

Knobloch, Kai; Staatl. gepr. Techniker

Platzhalter für Portraitbild

Kai Knobloch , Staatl. gepr. Techniker

Send Email

Chair of Processing Machines and Processing Technology

work

Visiting address:

Hauptgebäude ZIN Bergstr. 120

01069 Dresden

Sekretariat Frau Heidelinde Siegert

work Tel.

Köhler, Hannes; Dr.-Ing.

Hannes Köhler

Cleaning Technologies

Dr.-Ing. Hannes Köhler

Research Field Coordinator

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 221 Bergstr. 120

01069 Dresden

Germany

work Tel.

Research Focus

Modelling of Cleaning Processes
Collaboration in the IGF-project Experimentally supported basis models for a feasible numerical cleaning simulation 2
Concluded projects:
- Experimentally supported basis models for a feasible numerical cleaning simulation
- "Development of a process model for jet cleaning in the food industry 1 + 2"

Teaching

Exercise and practical support in the following courses:
- Cleaning technology and industrial hygiene (MB-VTMB-28)

Publications

46 Entries

2023

Reduced cleaning model for highly viscous non-Newtonian fluids in pipelinesLiebmann, V., Heide, M., Köhler, H., Golla, C., Fröhlich, J. & Rüdiger, F., 18 Jul 2023, 33rd European Symposium on Computer Aided Process Engineering. Elsevier, p. 325-330, 6 p.Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Influence of rheological properties and pull‑off forces of native and modified starches on cleaning in plane channel flowKricke, S., Berger, C., Zahn, S., Köhler, H., Rohm, H. & Majschak, J., 7 Jul 2023, In: International Journal of Heat and Mass Transfer. 2023Electronic (full-text) versionResearch output: Contribution to journal > Research article
Numerical modeling of a cohesively separating soil layer in consideration of locally varying soil distributionGolla, C., Köhler, H., Fröhlich, J. & Rüdiger, F., 28 Jun 2023, In: International Journal of Heat and Mass Transfer. 2023, 213Electronic (full-text) versionResearch output: Contribution to journal > Research article
Identification of cleaning mechanism by using neural networksGolla, C., Freiherr Marschall, W., Kricke, S., Rüdiger, F., Köhler, H. & Fröhlich, J., Mar 2023, In: Food and Bioproducts Processing. 138, p. 86-102, 17 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2022

CFD-based three-dimensional modeling of an adhesively detaching soil layer in a channel flow with sudden expansionGolla, C., Köhler, H., Liebmann, V., Fröhlich, J. & Rüdiger, F., Nov 2022, In: Food and Bioproducts Processing. 136, p. 176-183, 8 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Direct measurement of the cohesive strength of whey protein gel in contact with NaOH by wire cutting experimentsHelbig, M., Majschak, J. & Köhler, H., Nov 2022, In: Food and Bioproducts Processing. 136, 136, p. 141 - 153, 13 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Direct measurement of the cohesive strength of whey protein gel in contact with NaOH by wire cutting experimentsHelbig, M., Majschak, J. & Köhler, H., 28 Mar 2022, Proceedings - International Conference on Fouling and Cleaning in Food Processing 2022. Lille, 12 p.Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Aspects of Modelling the Cleaning of a Chocolate With Yield Stress in a Pipe Using CFDLiebmann, V., Heide, M., Schoppmann, K., Köhler, H. & Rüdiger, F., 2022, Proceedings of the International Conference on Fouling & Cleaning in Food Processing 2022Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution
CFD-Based Modeling of a Cohesively Separating Soil Layer in Consideration of Local Soil DistributionGolla, C., Köhler, H. & Rüdiger, F., 2022, Proceedings of 14th International Conference on Heat Exchanger Fouling and Cleaning 2022Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
CFD-Based Three-Dimensional Modeling of an Adhesively Detaching Soil Layer in a Channel Flow With Sudden ExpansionGolla, C., Köhler, H., Liebmann, V., Fröhlich, J. & Rüdiger, F., 2022, Proceedings of the International Conference on Fouling & Cleaning in Food Processing 2022Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution

Kricke, Sebastian; Dipl.-Ing.

Foto: Porträt Sebastian Kricke

Cleaning Technologies

Dipl.-Ing. Sebastian Kricke

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 221 Bergstr. 120

01069 Dresden

Germany

work Tel.

Research Focus

Soil-specific cleaning behaviour
Collaboration in the IGF-project “Identification of physical-chemical properties of soils for structure-based cleaning optimisation in the food industry 2”
Supporting the ERDF project: “Material Hub” in cooperation with SLUB Dresden

Teaching

Exercise and practical support in the following courses:
- Cleaning technology and industrial hygiene (MB-VTMB-28)

Publications

12 Entries

2023

Influence of rheological properties and pull‑off forces of native and modified starches on cleaning in plane channel flowKricke, S., Berger, C., Zahn, S., Köhler, H., Rohm, H. & Majschak, J., 7 Jul 2023, In: International Journal of Heat and Mass Transfer. 2023Electronic (full-text) versionResearch output: Contribution to journal > Research article
Identification of cleaning mechanism by using neural networksGolla, C., Freiherr Marschall, W., Kricke, S., Rüdiger, F., Köhler, H. & Fröhlich, J., Mar 2023, In: Food and Bioproducts Processing. 138, p. 86-102, 17 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Schmutz im Fokus - Analyse reinigungsrelevanter Schmutzeigenschaften zur bedarfsgerechten Auslegung von ReinigungsprozessenZahn, S. & Kricke, S., 2023, In: Food-Lab : food analytics, legislation, QM in processing. 2023, 4, p. 27-31Research output: Contribution to journal > Research article

2022

Influence of the Rheological Properties and Pull-off Forces of Native and Modified Starches on Cleaning in Plane Channel FlowKricke, S., Berger, C., Zahn, S., Köhler, H., Rohm, H. & Majschak, J., 2022, 10 p.Electronic (full-text) versionResearch output: Book/Report/Anthology > Conference proceeding
Schmutz im Fokus - Analyse reinigungsrelevanter Schmutzeigenschaften zur bedarfsgerechten Anpassung von ReinigungsprozessenZahn, S. & Kricke, S., 2022, In: Food-Lab : food analytics, legislation, QM in processing. 2022, 4, p. 27-31Research output: Contribution to journal > Research article

2021

Effect of Physicochemical Properties of Native Starches on Cleaning in Falling Film and Plane Channel Flow ExperimentsKricke, S., Böttcher, K., Zahn, S., Majschak, J. P. & Rohm, H., 2021, In: Heat transfer engineering. 2021Electronic (full-text) versionResearch output: Contribution to journal > Research article

2019

Effect of physicochemical properties of native starches on cleaningZahn, S., Böttcher, K., Kricke, S., Majschak, J. & Rohm, H., 2019Electronic (full-text) versionResearch output: Contribution to conferences > Paper
Simulation of jet cleaning: Diffusion model for swellable soilsJoppa, M., Köhler, H., Kricke, S., Majschak, J., Fröhlich, J. & Rüdiger, F., 2019, In: Food and Bioproducts Processing. 113, p. 168-176, 9 p.Electronic (full-text) versionResearch output: Contribution to journal > Conference article

2018

Effect of industrial scale stand-off distance on water jet break-up, cleaning and forces imposed on soil layersFuchs, E., Kricke, S., Schöhl, E. & Majschak, J., 2018, In: Food and Bioproducts Processing. 2019, 113, p. 129-141, 13 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Influence of the nozzle distance on the cleaning result compared to the jet break up and the mechanical forces on an industrial scaleFuchs, E., Kricke, S., Schöhl, E. & Majschak, J., 2018, p. 341-358, 18 p.Research output: Contribution to conferences > Paper

Otto, Christiane; Dr.-Ing.

Platzhalter für Portraitbild

Packaging Technology

Dr.-Ing. Christiane Otto

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 108 Bergstr. 120

01069 Dresden

work Tel.

Publications

1 bis 1 von 1 Einträgen

Weiß, U.; Otto, Chr.: Kommunikationsfunktion der Verpackung. In: Verpackungstechnik Mehr Wert für Praktiker: Mittel und Methoden zur Lösung der Verpackungsaufgabe (2015)

Diese Informationen werden vom Vorgängersystem FIS bereitgestellt.

Pfeiffer, Stephan; Dipl.-Ing.

Portät Stephan Pfeiffer

Processing Systems

Dipl.-Ing. Stephan Pfeiffer

Sealing and Forming of polymer Packaging Materials

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 220 Bergstr. 120

01069 Dresden

work Tel.

Research

Sealing and Forming of polymer packaging materials
current research project "Measurement setup for inline material characterization for a material model of the thermoforming simulation"

Publications

The FIS cannot provide any results for the selected parameters.

Rosenbusch, Phillip; Dipl.-Ing.

Platzhalter für Portraitbild

Processing Systems

Dipl.-Ing. Phillip Rosenbusch

Natural Fiber Based Functional Structures

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 216 Bergstr. 120

01069 Dresden

work Tel.
fax Fax: +49 351 463-37142

Research

Publications

2 Entries

2019

Adhesive free paper honeycomb core and related manufacturing process for use in environmentally friendly sandwich panelsBritzke, M. & Rosenbusch, P., 2019Research output: Contribution to conferences > Paper
Neuartige, klebstofffreie PapierwabenstrukturRosenbusch, P. & Britzke, M., 2019Research output: Contribution to conferences > Paper

Schmidtchen, Ludwig; Dipl.-Ing.

Platzhalter für Portraitbild

Packstoffe aus Makroalgen

Mr Dipl.-Ing. Ludwig Schmidtchen

external doctoral student

Send Email

Chair of Processing Machines and Processing Technology

work

Besucheradresse:

Hauptgebäude ZIN, ZIN 225 Bergstr. 120

01069 Dresden

work Tel.

Publications

Diese Informationen werden vom Vorgängersystem FIS bereitgestellt.

Siegert, Heidelinde; Sekretariat

Platzhalter für Portraitbild

Secretary

Heidelinde Siegert

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 103 Bergstr. 120

01069 Dresden

work Tel.
work Tel.

Steinert, Georg; Dipl.-Ing.

Foto: Porträt Georg Steinert

Processing Systems

Dipl.-Ing. Georg Steinert

Motion Technology

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 106 Bergstr. 120

01069 Dresden

Germany

work Tel.

Research

Product and cycle rate adapted motion design of the Pick & Place technology
current project: Significantly increased efficiency of a final packaging system - GRAND

Publications

The FIS cannot provide any results for the selected parameters.

Tietze, Sven; Dr.-Ing.

Platzhalter für Portraitbild

Dr.-Ing. Sven Tietze

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, 107 Bergstraße 120

01069 Dresden

work Tel.

Publications

5 Entries

2020

Controlling Liquid Slosh by Applying Optimal Operating-Speed-Dependent Motion Profiles in Packaing MachinesTroll, P. C., Tietze, S. & Majschak, J., 2020, 18 p.Electronic (full-text) versionResearch output: Other contribution > Other

2019

Investigation on the Application of Operating Speed Dependent Motion Profiles in Processing Machines at the Example of Controlling Liquid Slosh.Troll, P. C., Tietze, S. & Majschak, J., 2019, 10 p.Electronic (full-text) versionResearch output: Other contribution > Other
Modelling of Oblique Wire Cutting and Experimental Application on Soft Solid Foods for the Investigation of Friction Behaviour.Witt, T., Holländer, Y., Tietze, S. & Majschak, J., 2019, In: Journal of Food QualityElectronic (full-text) versionResearch output: Contribution to journal > Research article

2018

Bewegungstechnik & Bewegungsdesign für VerarbeitungsmaschinenTietze, S. & Majschak, J., 2018, Qucosa. Neuerscheinung ed., DresdenElectronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Chapter in book/anthology/report

2017

Minimierung ungewollter Bewegungen in Verarbeitungs- und Textilmaschinen. Methoden und Beispiele in der Lehre.Tietze, S., Hanke, U. & Speicher, T., 2017, p. 65-88, 24 p.Research output: Contribution to conferences > Paper

Weiß, Uta; Dr.-Ing.

Platzhalter für Portraitbild

Dr.-Ing. Uta Weiß

Send Email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 108 Bergstr. 120

01069 Dresden

work Tel.

Publications

10 Entries

2022

Verpackungstechnische Möglichkeiten für die Praxis/ Aufbau des maschinellen verpackungstechnischen Prozesses und seine GrundlagenWeiß, P. D. M., Weiß, U., Schwarz, M., Kosmann, F. & Allaki, T., 2022, DLG-Qualitätsatlas für Verpackung von Fleisch und Fleischerzeugnissen. DLG e.V., Arbeitskreis Verpackung in der Supply Chain (ed.). Neuerscheinung ed., Frankfurt: DLG-Verlag, 75 p.Research output: Contribution to book/conference proceedings/anthology/report > Chapter in book/anthology/report

2020

Verpackungsentsorgung und KreislaufwirtschaftWeiß, U., 2020, Grundlagen der Verpackung. Kaßmann, M. (ed.). 3. ed., Berlin: Beuth Verlag, p. 357-378, 21 p.Research output: Contribution to book/conference proceedings/anthology/report > Chapter in book/anthology/report

2017

Schutzfunktion der VerpackungWeiß, U., 2017, Verpackungstechnik: Mittel und Methoden zur Lösung der Verpackungsaufgabe. Hennig, J. (ed.). Beuth VerlagResearch output: Contribution to book/conference proceedings/anthology/report > Chapter in book/anthology/report

2015

Kommunikationsfunktion der VerpackungWeiß, U. & Otto, C., 2015, Verpackungstechnik: Mittel und Methoden zur Lösung der Verpackungsaufgabe. Hennig, J. (ed.). Beuth VerlagResearch output: Contribution to book/conference proceedings/anthology/report > Chapter in book/anthology/report
Mensch-Maschine-EINSystemWeiß, U. & Joiko, K., 2015Research output: Contribution to conferences > Poster
Rationalisierungsfunktion der VerpackungWeiß, U., 2015, Verpackungstechnik: Mittel und Methoden zur Lösung der Verpackungsaufgabe. Hennig, J. (ed.). Beuth VerlagResearch output: Contribution to book/conference proceedings/anthology/report > Chapter in book/anthology/report

2014

Beiträge in NachschlagewerkWeiß, U., 2014, Lexikon Verpackungstechnik. Bleisch, G., Langowski, H. & Majschak, J. (eds.). 2. ed., Hamburg: Behr'sResearch output: Contribution to book/conference proceedings/anthology/report > Entry for encyclopedia/dictionary

2011

Verpackungstechnische ProzesseBleisch, G., Majschak, J. & Weiß, U., 2011, Neuerscheinung ed., Hamburg: Behr's, 591 p.Research output: Book/Report/Anthology > Monograph

2010

Packaging materials and equipmentSchneider, Y., Kluge, C., Weiss, U. & Rohm, H., 2010, Technology of Cheesemaking. London: Wiley-Blackwell, Oxford [u. a.], p. 413-439Research output: Contribution to book/conference proceedings/anthology/report > Chapter in book/anthology/report

2003

Beiträge in NachschlagewerkWeiß, U., 2003, Lexikon Verpackungstechnik. Bleisch, G., Goldhahn, H. & Majschak, J. (eds.). 1. ed., Hamburg: Behr'sResearch output: Contribution to book/conference proceedings/anthology/report > Entry for encyclopedia/dictionary

Lena Berthold

Last modified: Jul 01, 2022