Veröffentlichungen 2019
Beiträge als Zeitschriftenaufsätze (reviewed), Buchbeiträge, Berichte
Hänel, A.; Kusch, K.; Nestler, A.; Brosius, A.; V.; Göhler, V.; Jedlicka, K.:
Untersuchung der Stell- und Prozesskenngrößen beim Quer-Seiten-Drehschleifen unter Verwendung von CBN Topfschleifscheiben.
In: Hoffmeister, H.-W.; Denkena, B. (Hrsg.): Jahrbuch Schleifen, Honen, Läppen und Polieren. 68. Ausgabe, Essen: Vulkan Verlag 2019, S. 66-79, ISBN 978-3-8027-3091-7
Wohlrabe, D.; Arnold, F.; Havlík, R.; Koblasa, F.; Nitzsche, S.; Povolny, J.:
Praxisorientierte Kompetenzentwicklung Produktionstechnik durch Kooperation.
In: Vollmer, T.; Jaschke, S.; Hartmann, M.; Mahrin, B.; Neustock, U. (Hrsg.): Gewerblich-technische Berufsbildung und Digitalisierung: Praxiszugänge - Unterricht und Beruflichkeit (Berufsbildung, Arbeit und Innovation). Band 51, Bielefeld: Verlag wbv Media, S.85-106, ISBN 978-3763960248
Ben Achour, A.; Meißner, H.; Teicher, U.; Haim, D.; Range, U.; Brosius, A.; Leonhardt, H.; Lauer, G.:
Biomechanical Evaluation of Mandibular Condyle Fracture Osteosynthesis Using the Rhombic Three-Dimensional Condylar Fracture Plate.
Elsevier Science Direct, American Association of Oral and Maxillofacial Surgery, Volume 77, Issue 9, September 2019, Pages 1868.e1-1868.e15, https://doi.org/10.1016/j.joms.2019.04.020
Hartmann, M.; Nestler, A.; Wohlrabe, D.; Arnold, F.; Hoffmann, J.:
Development of a digital learning platform for the planning of manufacturing processes.
In: Nitu, L. E. and other (Eds.): Proceedings of the 23rd International Conference Innovative Manufacturing Engineering & Energy (IManEE2019). Pitesti, Romania, May 22–24, Pitesti, Romania. EDP Sciences, IOP Conference Series: Materials Science and Engineering, Vol. 564 (2019) 012004, https://iopscience.iop.org/issue/1757-899X/564/1, doi:10.1088/1757-899X/564/1/012085
Hänel, A.; Hasterok, M.; Schwarz, M.; Nestler, A.; Brosius, A.; Kroke, E.:
Technological investigation of binderless nanocrystalline cubic boron nitride (BNNC) as cutting material for groove turning of hardened steels.
In: Nitu, L. E. and other (Eds.): Proceedings of the 23rd International Conference Innovative Manufacturing Engineering & Energy (IManEE2019). Pitesti, Romania, May 22–24, Pitesti, Romania. EDP Sciences, IOP Conference Series: Materials Science and Engineering, Vol. 564 (2019) 012004, https://iopscience.iop.org/issue/1757-899X/564/1, doi:10.1088/1757-899X/564/1/012004
Hänel, A.; Wenkler, E.; Schnellhardt, T.; Corinth, C.; Fay, A.; Nestler, A.; Brosius, A.:
Development of a method to determine cutting forces based on planning and process data as a contribution for the creation of digital process twins.
MM Science Journal, 2019 Special Issue on 15th International Conference High Speed Machining (HSM2019), Prague, Czech Republic, October 8-9., ISSN 1803-1269 (Print), ISSN 1805-0476 (On-line), DOI: 10.17973/MMSJ.2019_11_2019064
Teicher, U.; Pirl, S.; Nestler, A.; Hellmich, A.; Ihlenfeldt, S.:
Surface Roughness and its Prediction in High Speed Milling of Aluminium Alloys with PCD and Cemented Carbide Tools.
MM Science Journal, 2019 Special Issue on 15th International Conference High Speed Machining (HSM2019), Prague, Czech Republic, October 8-9., ISSN 1803-1269 (Print), ISSN 1805-0476 (On-line), DOI: 10.17973/MMSJ.2019_11_2019062
Ben Achour, A.; Petto, C.; Meißner, H.; Hipp, D.; Nestler, A.; Lauer, G.; Teicher, U.:
The influence of thrust force on the vitality of bone chips harvested for autologous augmentation during dental implantation.
MDPI Materials Editorial Office, Basel, Switzerland, Materials 2019, 12, 3695; doi:10.3390/ma12223695
Teicher, U.; Pirl, S.; Nestler, A.; Hellmich, A.; Ihlenfeldt, S.:
A novel hybrid clamping system for sheet metals and thin walled Structures.
18th Machining Innovations Conference for Aerospace Industry (MIC 2019), Hannover, Germany, November 27-28., Elsevier ScienceDirect, Procedia Manufacturing
Nitzsche, S.; Geipel, T.; Zelenskyi, A.; Zeidler, H.; Arnold, F.; Nestler, A.; Wohlrabe, D.; Hartmann, M .; Vavrousek, M.; Koblasa, F.; Hren, I.; Benes, L.:
Computer-Aided Teaching and Learning Environment for the Planning of serial Production Processes.
Proceedings of International Academic Conference on Teaching, Learning and E-Learning, Dresden, Germany, October 25-26, 2019, ISBN 978-80-88203-13-1, S. 124-131
Hänel, A.:
AeroCut 4.0 - Entwicklung eines intelligenten Analyse- und Optimierungssystems auf Basis eines digitalen Prozess-Zwillings zur Steigerung der Produktivität bei der Fräsbearbeitung komplexer Bauteile aus Hochleistungswerkstoffen für die Luft- und Raumfahrtindustrie.
Zwischenbericht AIF/ZIM, Dresden, 31.01.2019
Herausgeberschaft
Nestler, A. (Hrsg.):
Innovative Technologien für die Bearbeitung metallischer und nichtmetallischer Werkstoffe.
Vortragsband zum 22. Fachkolloquium am 27.09.2019. Dresden: Selbstverlag TU Dresden, ISBN 978-3-86780-606-0
Künanz, K.; Nestler, A.; Hoffmann, J.:
Fertigungstechnik II, Zerspan- und Abtragtechnik, Teil 3 Berechnungsgrundlagen, Augabenstellungen und Lösungen für vorlesungsbegleitende und fachgebietsvertiefende Übungen.
Studienbrief der TU Dresden. TU Dresden, Fakultät Maschinenwesen, Arbeitsgruppe Fernstudium, Ausgabe 2019
Vortragstätigkeit
Hänel, A.; Hasterok, M.:
Binderless nanocrystalline cubic boron nitride (BNNC) as cutting material for turning applications.
2nd Freiberg High Pressure Symposium "c-BN- and diamond-based hard materials for metal and rock cutting". Freiberg, June 4–5, 2019
Hänel, A.:
Technological investigation of binderless nanocrystalline cubic boron nitride (BNNC) as cutting material for groove turning of hardened steels.
23rd International Conference Innovative Manufacturing Engineering & Energy (IManEE2019). Pitesti, Romania, May 22–24 2019.
Arnold, F.:
Fertigungsprozessplanung und -durchführung in der spanenden Teilefertigung.
Fertigungsprozessplanung und -durchführung in der spanenden Teilefertigung.
Ben Achour, A.:
Zerspanungsforschung in der Medizintechnik.
Vortrag zum 22. Fachkolloquium Innovative Technologien für die Bearbeitung metallischer und nichtmetallischer Werkstoffe. Dresden: 27.09.2018
Wenkler, E.:
Development of a method to determine cutting forces based on planning and process data as a contribution for the creation of digital process twins.
15th International Conference High Peed Machining (HSM2019), Prague, Czech Republic, October 8-9.
Teicher, U.:
Surface Roughness and its Prediction in High Speed Milling of Aluminum Alloys with PCD and Cemented Carbide Tools.
15th International Conference High Peed Machining (HSM2019), Prague, Czech Republic, October 8-9, 2019
Teicher, U.:
A novel hybrid clamping system for sheet metals and thin walled Structures.
18th Machining Innovations Conference for Aerospace Industry (MIC 2019), Hannover, Germany, November 27-28, 2019