Publications

Reschke, G.; Köhler, D.; Kupfer, R.; Troschitz, J.; Gude, M.; Brosius, A. (2024): In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points. (Elektronische Veröffentlichung vor Drucklegung) In: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering., 9 S. DOI: 10.1177/09544089241251646

Reschke, G.; Brosius, A. (2024): Investigations on Continuous Transient Dynamic Analysis of Clinched Aluminum Sheets. In: Production at the Leading Edge of Technology: Proceedings of the 13th Congress of the German Academic Association for Production Technology (WGP), Freudenstadt, November 2023. S. 74–83 10 S.

Alexander Wolf; Marc Tulke; Alexander Brosius (2024): Cryogenic Deep Drawing Tool Design for Reduced Heat Transfer. In: IOP Conference Series: Materials Science and Engineering (1307), 8 S. DOI: 10.1088/1757-899X/1307/1/012021.

Marc Tulke; Alexander Brosius (2024): Cryogenic Deep Drawing Tool Design for Reduced Heat Transfer. In: IOP Conference Series: Materials Science and Engineering (1307), 8 S. DOI: 10.1088/1757-899X/1307/1/012019.

Sophie Charlotte Stebner; Juri Martschin; Bahman Arian; Stefan Dietrich; Martin Feistle; Sebastian Hütter; Rémi Lafarge; et. al. (2024): Monitoring the evolution of dimensional accuracy and product properties in property-controlled forming processes. In: Advances in Industrial and Manufacturing Engeneering (8), 20 S. DOI: 10.1016/j.aime.2023.100133.

G Reschke; D Köhler; R Kupfer; J Troschitz; M Gude; A Brosius (2024): In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points. In: Proceedings of the Institution of Mechanical Engineers Part E: Journal of Process Mechanical Engineering. DOI: 10.1177/09544089241251646.

G. Reschke; A. Brosius (2024): Investigations on Continuous Transient Dynamic Analysis of Clinched Aluminum Sheets. In: Production at the Leading Edge of Technology, S. 74–83.

Stefanie Günther; Benjamin Muhammedi; Thomas Werner; Carsten Ulrich; Berthold Schlecht; Alexander Hasse; Alexander Brosius (2024): Untersuchung der Steigerung der Dauerfestigkeit von Wellen durch Festwalzen. In: Dresdner Maschinenelemente Kolloquium 2024.

Stefanie Günther; Benjamin Muhammedi; Thomas Werner; Carsten Ulrich; Berthold Schlecht; Alexander Hasse; Alexander Brosius (Hg.) (2024): Untersuchung zur Steigerung der Dauerfestigkeit von Wellen durch Festwalzen.

Sebastian Langula; Martin Erler; Alexander Brosius (2023): An efficient method for automated machining sequence planning using an approximation algorithm. In: Production at the Leading Edge of Technology: Springer Cham (Lecture Notes in Production Engineering), S. 727–736.

Martin Erler; Anne Koch; Alexander Brosius (2023): Determination of Largest Possible Cutter Diameter of End Mills for Arbitrarily Shaped 3-Axis Milling Features. In: Production at the Leading Edge of Technology: Springer Cham (Lecture Notes in Production Engineering), S. 228–237.

Martin Erler; Alexander Brosius (2023): Automated Determination of Suitable Finishing Operation Types for Milling of Surfaces. In: Production at the Leading Edge of Technology: Springer Cham (Lecture Notes in Production Engineering), S. 697–706. Online verfügbar unter https://wgp.de/de/aktivitaeten/wgp-jahreskongress/.

Marc Tulke; Rémi Lafarge; Alexander Wolf; Alexander Brosius (2023): Contact conditions and temperature distribution during cryogenic deep drawing with macro-structured tools. In: Katia Mocellin, Pierre-Olivier Bouchard, Régis Bigot und Tudor Balan (Hg.): Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 2, Bd. 2: Springer Singapore (Lecture Notes in Mechanical Engineering), S. 233–243. Online verfügbar unter https://ictp2023.org/en/. DOI: 10.1007/978-3-031-40920-2_25

Juliane Troschitz; Sven Bräunling; Matthias Kahl; Frank Schneider; Fabian Folprecht; Levin Schilling et al. (2023): Kombination von Spritzgießen und Metallumformung in einem Prozess. In: Tagungsband Technomer 2023. Online verfügbar unter https://www.tu-chemnitz.de/mb/KunstStTechn/technomer/.

Gregor Reschke; Daniel Köhler; Robert Kupfer; Juliane Troschitz; Alexander Brosius (Hg.) (2023): In-situ computed tomography and transient dynamic analysis – Failure analysis of a single-lap tensile shear test with clinch joints. Online verfügbar unter https://www.fe.up.pt/ajp/2023/. DOI: 10.1177/09544089241251646

Daniel Köhler; Richard Stephan; Robert Kupfer; Juliane Troschitz; Alexander Brosius; Maik Gude (2023): In-situ computed tomography and transient dynamic analysis of a single-lap shear test with a composite-metal clinch point. In: Production at the Leading Edge of Technology: Springer Cham (Lecture Notes in Production Engineering), S. 265–275.

Christian Steinfelder; Alexander Brosius (Hg.) (2023): Experimental investigation of the cause and effect relationships between the joint and the component during clinching. Online verfügbar unter https://www.shemet.org/2023/. DOI: 10.21741/9781644902417-19

C. Zirngibl; S. Martin; Christian Steinfelder; B. Schleich; Thomas Tröster; Alexander Brosius; S. Wartzack (Hg.) (2023): Methodical Approach for the Design and Dimensioning of mechanical Clinched Assemblies. Online verfügbar unter https://www.shemet.org/2023/. DOI: 10.21741/9781644902417-23

Alexander Brosius; Usama Ahmed (2023): Efficient Process Monitoring in Clinching: Development of a Fast Predictor-Corrector Model for Clinch Analysis. In: Production at the Leading Edge of Technology: Springer Cham (Lecture Notes in Production Engineering), S. 64–73.

Alexander Brosius; Rémi Lafarge; Thorsten Halle; S. Hütter (2023): Process Window and Repeatability of Thermomechanical Tangential Ring Rolling. In: Journal of manufacturing and materials processing 2023 (7). DOI: 10.3390/jmmp7030098.

Alexander Brosius; Rémi Lafarge (2023): Temperature control for thermomechanical ring rolling. In: Production Engineering 2023 (17), S. 907–914. DOI: 10.1007/s11740-023-01213-7.

Alexander Brosius; Marc Tulke; Alexander Wolf (2023): Macro-structured Deep Drawing of Steel Alloys-Influenceability on Thinning and Drawing Forces. In: Production at the Leading Edge of Technology: Springer Cham (Lecture Notes in Production Engineering).

Alexander Brosius; Marc Tulke (2023): Forming of aluminium alloys with macro-structured tools at cryogenic temperature. In: CIRP Annals - Manufacturing Technology 72 (1), S. 225–228. DOI: 10.1016/j.cirp.2023.03.018.

Richard Stephan; Alexander Brosius (2022): Experimental measurement method and evaluation of an analytical approach for sound conduction through multiple clinched sheets. In: Engineering Proceedings 26 (1). DOI: 10.3390/engproc2022026025.

Martin Erler; Alexander Brosius (2022): Gamification of Produktionsautomatisierung. In: Lessons Learned 2 (1). DOI: 10.25369/ll.v2i1.50.

Marc Tulke; E. Galiev; V. Psyk; Verena Kräusel; Alexander Brosius (2022): Deep drawing of DC06 at high strain rates. In: IOP Conference Series: Materials Science and Engineering 1238. DOI: 10.1088/1757-899X/1238/1/012047.

Marc Tulke; Alexander Wolf; Rémi Lafarge; Fabius Grunow; Alexander Brosius (2022): Influence of Macro-Structured Tools on the Formability of Aluminum Alloys in the Cryogenic Temperature Range. In: Key Engineering Materials 926, S. 760–767. DOI: 10.4028/p-nhu9o5.

Gerson Meschut; Marion Merklein; Alexander Brosius; Mathias Bobbert (2022): Mechanical joining in versatile process chains. In: Production Engineering 16 (2-3), S. 187–191. DOI: 10.1007/s11740-022-01125-y.

Gerson Meschut; Marion Merklein; Alexander Brosius; Dietmar Drummer; Livan Fratini; Uwe Füssel et al. (2022): Review on mechanical joining by plastic deformation. In: Journal of Advanced Joining Processes 5. DOI: 10.1016/j.jajp.2022.100113.

Felix Hakenbeck; Rémi Lafarge; Alexander Brosius (2022): Post necking evaluation of the tensile test using artificial neural networks. In: IOP Conference Series: Materials Science and Engineering 1238. DOI: 10.1088/1757-899X/1238/1/012048.

Elmar Galiev; Sven Winter; Franz Reuther; Verena Psyk; Marc Tulke; Alexander Brosius; Verena Kräusel (2022): Local Temperature Development in the Fracture Zone during Uniaxial Tensile Testing at High Strain Rate: Experimental and Numerical Investigations. In: Applied Sciences : open access journal 12 (5). DOI: 10.3390/app12052299.

Daniel Köhler; Richard Stephan; Robert Kupfer; Juliane Troschitz; Alexander Brosius; Maik Gude (2022): Investigations on combined in situ CT and acoustic analysis during clinching. In: Key Engineering Materials 926, S. 1489–1497. DOI: 10.4028/p-32330d.

D. Köhler; B. Sadeghian; J. Troschitz; R. Kupfer; M. Gude; A. Brosius (2022): Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis. In: Journal of Advanced Joining Processes 5. DOI: 10.1016/j.jajp.2021.100089.

Christian Steinfelder; Johann Acksteiner; Guilleaume Christina Julia; Alexander Brosius (2022): Analysis of the interactions between joint and component properties during clinching. In: Production Engineering 16 (2-3), S. 235–245. DOI: 10.1007/s11740-021-01102-x.

Britta Schramm; Sven Martin; Christian Steinfelder; Bielak Christian R.; Alexander Brosius; Gerson Meschut et al. (2022): A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. In: Journal of Advanced Joining Processes 6. DOI: 10.1016/j.jajp.2022.100133.

Alexander Wolf; Niklas Küsters; Sven Bräunling; Daniel Weck; Christina Kittner; Maik Gude et al. (2022): Modeling metal forming of a magnesium alloy using an adapted material model. In: Engineering Reports 4 (7-8). DOI: 10.1002/eng2.12540.

Alexander Brosius; Lars Ewenz; Richard Stephan; Martina Zimmermann (Hg.) (2022): Anrisserkennung an geclinchten Proben während einer zyklischen Belastung unter Nutzung eines Scanning Laser-Doppler-Vibrometers. Online verfügbar unter https://dgm.de/wp/2022/.

A. Wolf; M. Tulke; A. Brosius (2022): Deep Drawing with Macro-structured Tools and Their Influence on Residual Stresses: Springer Cham. DOI: 10.1007/978-3-030-78424-9_11

Alexander Brosius; Jan Kalich; Richard Stephan; Uwe Füssel (Hg.) (2022): Untersuchung des Einflusses des vorliegenden Bindemechanismus auf die Körperschalldämpfung in Clincheverbindungen. Online verfügbar unter https://dgm.de/wp/2022/.

Usama Ahmed; Rémi Lafarge; Alexander Brosius (Hg.) (2021): A comparative study of material hardening models for forming operations and prediction of kinematic hardening by means of an analytical indicator. Online verfügbar unter https://congress.cimne.com/complas2021/frontal/default.asp. DOI: 10.23967/complas.2021.003

Sven Harzheim; Christian Steinfelder; Thomas Wallmersperger; Alexander Brosius (2021): A first approach for the treatment of galvanic corrosion and of load-bearing capacity of clinched joints. In: M. Merklein, H. Hagenah, J. Duflou, L. Fratini, F. Micari, P. Martins und G. Meschut (Hg.): Sheet Metal 2021: Trans Tech Publications Ltd, S. 97–104. Online verfügbar unter https://www.shemet.org/2021/. DOI: 10.4028/www.scientific.net/KEM.883.97

Rémi Lafarge; Sebastian Hütter; Marc Tulke; Thorsten Halle; Alexander Brosius (2021): Data based model predictive control for ring rolling. In: Production Engineering 15 (6), S. 821–831. DOI: 10.1007/s11740-021-01063-1.

Rémi Lafarge; Alexander Wolf; Christina Guilleaume; Alexander Brosius (2021): A New Non-destructive Testing Method Applied to Clinching. In: Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek und Yoshinori Yoshida (Hg.): Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity: Springer Cham, S. 1461–1468. DOI: 10.1007/978-3-030-75381-8_121

Martin Erler; Alexander Brosius (2021): Fertigungsaufwände deutlich effizienter kalkulieren. WGP Newsletter https://wgp.de/de/fertigungsaufwaende-deutlich-effizienter-kalkulieren/

M. Tulke; A. Wolf; A. Brosius (2021): Cryogenic deep drawing of aluminum alloy AA6014 using macro-structured tools. In: IOP Conference Series: Materials Science and Engineering 1157 (1). DOI: 10.1088/1757-899x/1157/1/012053.

L. Penter; J. Maier; B. Kauschinger; T. Lebelt; N. Modler; S. Ihlenfeldt (2021): 3D printing technology for low cost manufacturing of hybrid prototypes from multi material composites. In: Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt und Wulfsberg Jens Peter (Hg.): Production at the leading edge of technology: Springer Fachmedien Wiesbaden GmbH (Lecture Notes in Production Engineering), S. 396–405.

Jens Hoffmann; Alexander Brosius (2021): Erfahrungen bei EXAM/ONYX-Klausuren. In: Lessons Learned 1 (1/2). DOI: 10.25369/ll.v1i1/2.

David Kühne; Boris Spak; Markus Kästner; Alexander Brosius; Melanie Fiedler (2021): Consideration of cyclic hardening and residual stresses in fatigue life calculations with the local strain approach. In: Archive of Applied Mechanics 2021 (91), S. 3693–3707. DOI: 10.1007/s00419-021-01950-0

D. Köhler; B. Sadeghian; R. Kupfer; J. Troschitz; M. Gude; A. Brosius (2021): A method for characterization of geometric deviations in clinch points with computed tomography and transient dynamic analysis. In: Key Engineering Materials 883, S. 89–96. DOI: 10.4028/www.scientific.net/KEM.883.89.

Christina Guilleaume; David Kuehne; Markus Kaestner; Alexander Brosius (2021): Residual stress oriented joining of hybrid components by radial-rolling. In: Forschung im Ingenieurwesen/Engineering Research 85 (3), S. 745–755. DOI: 10.1007/s10010-021-00486-7.

Christina Guilleaume; Alexander Brosius (2021): Cross-rolling process for manufacturing lightweight hybrid components. In: Journal of Advanced Joining Processes 3. DOI: 10.1016/j.jajp.2021.100063.

Christian Steinfelder; Sven Martin; Alexander Brosius; Thomas Tröster (2021): Load path transmission in joining elements. In: M. Merklein, H. Hagenah, J. Duflou, L. Fratini, F. Micari, P. Martins und G. Meschut (Hg.): Sheet Metal 2021: Trans Tech Publications Ltd, S. 73–80. Online verfügbar unter https://www.shemet.org/2021/. DOI: 10.4028/www.scientific.net/KEM.883.73

C Wischer; C Steinfelder; W Homberg; A Brosius (2021): Joining with Friction Spun Joint Connectors – Manufacturing and Analysis. In: IOP Conference Series: Materials Science and Engineering 1157 (1), S. 12007. DOI: 10.1088/1757-899X/1157/1/012007.

C Steinfelder; J Kalich; A Brosius; U Füssel (2021): Numerical and experimental investigation of the transmission moment of clinching points. In: IOP Conference Series: Materials Science and Engineering 1157 (1), S. 12003. DOI: 10.1088/1757-899X/1157/1/012003.

Bernd-Arno Behrens; Alexander Brosius; Wolfgang Hintze; Steffen Ihlenfeldt; Wulfsberg Jens Peter (Hg.) (2021): Production at the leading edge of technology: Springer Fachmedien Wiesbaden GmbH (Lecture Notes in Production Engineering).

Behrens Bernd Arno; Alexander Brosius; Wolfgang Hintze; Steffen Ihlenfeldt; Wulfsberg Jens Peter (2021): Preface. In: Lecture Notes in Production Engineering Part F1136, S. v.

B. Sadeghian; C. Guilleaume; R. Lafarge; A. Brosius (2021): Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach. In: Lecture Notes in Production Engineering. Germany: Springer Nature (Lecture Notes in Production Engineering), S. 116–124. DOI: 10.1007/978-3-662-62138-7_12

Alves L. M.; Afonso R. M.; Alexander Brosius; Martins P. A. F. (2021): Deformation assisted joining of sheets to rods by indentation and injection. In: CIRP Journal of Manufacturing Science and Technology 33, S. 247–255. DOI: 10.1016/j.cirpj.2021.03.018.

Verena Psyk; Christian Scheffler; Marc Tulke; Sven Winter; Christina Guilleaume; Alexander Brosius (Hg.) (2020): Determination of Material and Failure Characteristics for High-Speed Forming via High-Speed Testing and Inverse Numerical Simulation. DOI: 10.3390/jmmp4020031

Usama Ahmed; Rémi Lafarge; Niklas Küsters; Alexander Brosius (Hg.) (2020): Kinematic hardening influence prediction in deep drawing. Online verfügbar unter https://de.readkong.com/page/meform-2020-materials-data-for-smart-forming-technologies-8789833.

Theresa Jähnig; Mousavi Seyed Ali; Teja Roch; Eckhard Beyer; Lasagni Andrés Fabián; Alexander Brosius (2020): Macro-and microstructuring of deep drawing tools for dry forming processes: Final Project Report. WorkingPaper. Bremer Institut für Angewandte Strahltechnik Bremen. Dry Met. Forming OAJ FPR 6 (2020). S. 030–068. DOI: 10.26092/elib/154

Theresa Jähnig; Mousavi Seyed Ali; Alexander Brosius; Lasagni Andrés Fabián (2020): Structuring of forming tools for lubricant-free deep drawing. In: Laser-based Micro- and Nanoprocessing XIV: Curran Associates Inc (Proceedings of SPIE). DOI: 10.1117/12.2544731

Salvatore Leocata; Thomas Senner; Helga Reith; Alexander Brosius (2020): Experimental analysis and modeling of friction in sheet metal forming considering the influence of drawbeads. In: The International Journal of Advanced Manufacturing Technology 106 (4), S. 4011–4021. DOI: 10.1007/s00170-019-04847-z.

C. Steinfelder; A. Brosius (2020): A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis. In: Production at the leading edge of technology. WGP 2020. Lecture Notes in Production Engineering: Springer Fachmedien Wiesbaden GmbH (Production at the leading edge of technology), S. 134–141.

Alexander Brosius; Mousavi Seyed Ali (2020): Deep Drawing with macro structured for an envirmentally friendly process. In: Journal of Machine Engineering 20 (1), S. 34–42. DOI: 10.36897/jme/118216.

Alexander Brosius; Christina Guilleaume (2020): New cross-rolling process for joining of hybrid components. In: CIRP Annals - Manufacturing Technology 69 (1), S. 245–248. DOI: 10.1016/j.cirp.2020.04.034.

Albrecht Hänel; Torben Schnellhardt; Eric Wenkler; Andreas Nestler; Alexander Brosius; Christian Corinth et al. (2020): The development of a digital twin for machining processes for the application in aerospace industry. In: Procedia CIRP 93, S. 1399–1404. DOI: 10.1016/j.procir.2020.04.017.

Wolfram Volk; P. Groche; Alexander Brosius; Andrea ghiotti; Kinsey B. L.; M. Liewald et al. (2019): Models and modelling for process limits in metal forming. In: CIRP Annals - Manufacturing Technology 68 (2), S. 775–798. DOI: 10.1016/j.cirp.2019.05.007.

Theresa Jähnig; Mousavi Seyed Ali; Maximilian Steinhorst; Teja Roch; Alexander Brosius; Lasagni Andrés Fabián (2019): Friction reduction in dry forming by using tetrahedral amorphous carbon coatings and laser micro-structuring. In: Dry metal forming open access journal : DMFOAJ ; fast manuscript track 5 (5), S. 25–30.

Salvatore Leocata; Thomas Senner; Jean-Marc Saubiez; Alexander Brosius (2019): Influence of binder pressure zones on the robustness of restraining forces in sheet metal formin. In: Procedia manufacturing 29, S. 209–216. DOI: 10.1016/j.promfg.2019.02.128.

Rémi Lafarge; Niklas Küsters; Alexander Brosius (Hg.) (2019): A Novel indicator for kinematic hardening effect quantification in deep drawing simulation. Online COMPLAS2019

Niklas Küsters; Alexander Brosius (2019): Damage characterization on heterogeneous tensile tests. In: Procedia manufacturing 29, S. 458–463. DOI: 10.1016/j.promfg.2019.02.162.

Marc Tulke; Christina Guilleaume; Alexander Brosius (Hg.) (2019): Non-linear Model-predictive-control for Thermomechanical Ring Rolling. Online COMPLAS2019

Daniel Weck; Maik Gude; Alexander Brosius; Alexander Wolf; Chokri Cherif; Thomas Gereke et al. (Hg.) (2019): Smart Design von Metall-FKV-Hybridstrukturen mit verknüpfter Prozess- und Struktursimulation. Conference paper. Werkstoffwoche 2019, Dresden, Germany, 18 Sept 2019.

Albrecht Hänel; M. Hasterok; M. Schwarz; M. Feesche; R. Zinner; Andreas Nestler et al. (Hg.) (2019): Entwicklung innovativer Zerspanungswerkzeuge aus nanokristallinem binderfreiem kubischem Bornitrid (BNNC) zur Verbesserung der Oberflächenqualität und Erweiterung der Verfahrensgrenzen. Online verfügbar unter https://www.aif-projekt-gmbh.de/veranstaltungen/innovationstag/rueckblick-innovationstag.html.

Mousavi Seyed Ali; Ridolfi K. S.; Alexander Brosius (Hg.) (2018): Influence of alternating bending on springback behavior of parts in deep drawing process with macro-structured tools. DOI: 10.1051/matecconf/201819014005

Martha Seiler; Peter Hantschke; Alexander Brosius; Markus Kästner (Hg.) (2018): A numerically efficient phase-field model for fatigue fracture – 1D analysis. DOI: 10.1002/pamm.201800207

Marc Tulke; C. Scheffler; M. Linnemann; V. Psyk; D. Landgrebe; Alexander Brosius (2018): Characterisation of high strain rate material behaviour for high-speed forming and cutting applications. In: Journal of Physics: Conference Series 1063. DOI: 10.1088/1742-6596/1063/1/012166.

Frieder Zimmermann; Alexander Brosius; Ralf-Eckhard Beyer; J. Standfuß; A. Jahn; David Banke (2018): Creep forming of very thin AlMgSc sheets for aeronautical applications. In: Procedia manufacturing 15, S. 1008–1015. DOI: 10.1016/j.promfg.2018.07.393.

David Kühne; Christina Guilleaume; Martha Seiler; Peter Hantschke; Franz Ellmer; Thomas Linse et al. (2018): Fatigue analysis of rolled components considering transient cyclic material behaviour and residual stresses. In: Production Engineering (2), S. 189–200. DOI: 10.1007/s11740-018-0861-9.

Daniel Weck; Bernd Grüber; Pham Minh Quang; Alexander Wolf; Sven Bräunling; Jean-Paul Ziegs et al. (2018): Coupled process and structure analysis of metal-FRP-hybrid structures. In: Hybrid - Materials and Structures 2018 - Proceedings: DGM - Deutsche Gesellschaft für Materialkunde e.V, S. 246–253.

Christian Scheffler; V. Psyk; M. Linnemann; Marc Tulke; Alexander Brosius; D. Landgrebe (2018): Characterization of material parameters for high speed forming and cutting via experiment and inverse simulation. In: AIP Conference Proceedings. Online verfügbar unter https://esaform.org/conferences/.

C. Guilleaume; A. Brosius (2019): Simulation methods for skew rolling. In: Procedia manufacturing 27, S. 1–6. DOI: 10.1016/j.promfg.2018.12.035.

Alexander Wolf; Remi Lafarge; Alexander Brosius (2018): A non-destructive testing method for joints by the measurement of the energy dissipation. In: Production Engineering, S. 1–8. DOI: 10.1007/s11740-018-0860-x.

W. Homberg; T. Rostek; Mirko Schaper; O. Grydin; A. Andreiev; Alexander Brosius; Marc Tulke (2017): Development of Hybrid Directionally Structural Parts for Lightweight Applications. In: Proceedings of the 20th International ESAFORM Conference on Material Forming: American Institute of Physics (AIP Conference Proceedings Volume 1896/1). Online verfügbar unter https://esaform.org/conferences/.

Niklas Küsters; Alexander Brosius; Michael Schomäcker (2015): A new approach for the visioplastic stress analysis for material characterisation. In: 5th International Conference on Accuracy in Forming Technology ICAFT 2015 and 22nd Saxon Conference on Forming Technology SFU 2015: Verlag Wissenschaftliche Scripten.

Niklas Küsters; Alexander Brosius (2015): Simulation des Presshärteprozesses: Quo vadis? In: Tagungsband zum 10. Erlanger Workshop Warmblechumformung 2015.

Burak Özarmut; H. Richter; Alexander Brosius (2015): Probabilistic Analysis of Process Chain “Forming to Crash” Regarding Failure Prediction. In: 10th LS-DYNA Conference. Online verfügbar unter https://www.dynalook.com/conferences/10th-european-ls-dyna-conference.

S. Bruschi; T. Altan; D. Banabic; Bariani P. B.; Alexander Brosius (2014): Testing and modelling of material behaviour and formability in sheet metal forming. In: CIRP Annals - Manufacturing Technology 63 (2), S. 727–749. DOI: 10.1016/j.cirp.2014.05.005

Q. Yin; B. Zillmann; S. Suttner; G. Gerstein; M. Biasutti; Tekkaya A. Erman; Brosius A. et al. (2014): An experimental and numerical investigation of different shear test configurations for sheet metal characterization. In: International Journal of Solids and Structures 51 (5), S. 1066–1074. DOI: 10.1016/j.ijsolstr.2013.12.006.

O. Grydin; F. Nuernberger; Y. Zou; M. Schaper; Alexander Brosius (2014): Formation and Properties of Mixed Ferritic-Martensitic Microstructures in the Air-Hardening Steel LH800. In: Steel Research International 85 (9), S. 1340–1347. DOI: 10.1002/srin.201300420.

Niklas Küsters; Mousavi Seyed Ali; Alexander Brosius (2014): Approximation of Intermediate States for the evaluation of Sheet Metal Parts. In: Tagungsband zur AutoMetForm / SFU 2014 – New Materials for Vehicle Components, S. 111–117.

Mousavi Seyed Ali; Michael Schomäcker; Alexander Brosius (2014): Macro and micro structuring of deep drawing\textquoterights tools for lubricant free forming. In: Procedia engineering 81, S. 1890–1895. DOI: 10.1016/j.proeng.2014.10.252.

Marion Merklein; S. Suttner; Alexander Brosius (2014): Characterisation of kinematic hardening and yield surface evolution from uniaxial to biaxial tension with continuous strain path change. In: CIRP Annals - Manufacturing Technology 63 (1), S. 297–300. DOI: 10.1016/j.cirp.2014.03.039.

Kerstin Lehmann; Alexander Wolf; Alexander Brosius; Ali Mousavi; Volker Ulbricht; Dietmar Süße (2014): Innovationspapier: Gleitziehbiegen - auf dem Weg zur Innovation: Technische Universität Fakultät Maschinenwesen CIMTT Zentrum für Produktionstechnik und Organisation.

Jennifer Watzke; Michael Schomäcker; Alexander Brosius (2014): Cryogenic Shear Cutting of Fiber Reinforced Plastics (FRP). In: Procedia CIRP 18, S. 80–83. DOI: 10.1016/j.procir.2014.06.111.

Burak Özarmut; H. Richter; Alexander Brosius (Hg.) (2014): Parameter identification of a damage model for the process chain “forming to crash".

Alexander Brosius; Mousavi Seyed Ali (2014): Makro- und Mikrostrukturierung von Tiefziehwerkzeuge zur Trockenumformung. In: 21. Umformtechnisches Kolloquium Hannover, S. 325.

Alexander Brosius; Mousavi Seyed Ali (Hg.) (2014): Macro and Micro structuring of deep drawing tools for dry forming.

Alexander Brosius; Guilleaume Christina Julia; F. Walther; G. Frieling (Hg.) (2014): Experimental characterization of the deformation and damage behavior of polymer concrete under fatigue loading. Online verfügbar unter https://www.frontiersin.org/events/MSE_2014_-_Materials_Science_Engieering_-_Young_Researchers_Meet_Professionals/2403.

B. Özarmut; H. Richter; Alexander Brosius (2013): A Preliminary Study for Integrated Fracture Modeling of Process Chain Forming to Crash. In: 20. Sächsische Fachtagung Umformtechnik, Bd. 20. Germany: Technische Universität Dresden, S. 134–143.

A. Güner; C. Soyarslan; Alexander Brosius; Tekkaya A. Erman (2012): Characterization of anisotropy of sheet metals employing inhomogeneous strain fields for Yld2000-2D yield function. In: International Journal of Solids and Structures 49 (25), S. 3517–3527. DOI: 10.1016/j.ijsolstr.2012.05.001

A. Reeb; A. Ohl; K. Poser; T. Kloppenborg; Alexander Brosius; Tekkaya A. Erman; K.A. Weidenmann (2012): Preparation and Etching Methods for a Light-Optical Microscopy Analysis of Extrusion Seams and Microstructural Contrasting for Aluminum Alloys EN AW-6063 and EN AW-6082. In: Praktische Metallographie/Practical Metallography 49 (10), S. 612–622. DOI: 10.3139/147.110187.

Alexander Brosius; Ch. Weddeling; M. Hahn; Tekkaya A. Erman (2012): Elektromagnetisches Schweißen von Aluminiumblechen: Verlag Wissenschaftliche Skripten (Berichte aus dem IWU).

F. Taebi; Demir O. K.; M. Stiemer; V. Psyk; L. Kwiatkowski; Alexander Brosius (2012): Dynamic forming limits and numerical optimization of combined quasi-static and impulse metal forming. In: Computational Materials Science 54, S. 293–302. DOI: 10.1016/j.commatsci.2011.10.008.

G. Gershteyn; N. Shevchenko; Michael Diekamp; Alexander Brosius; M. Schaper (2012): Features of austenitic steels\textquoteright microstructure following plastic deformation. In: Materialwissenschaft und Werkstofftechnik 43 (3), S. 262–267. DOI: 10.1002/mawe.201200853.

G. Sebastiani; A. Wawrosch; V. Franzen; Alexander Brosius; Tekkaya A. Erman (2012): FlexDie: A flexible tooling-concept for incremental sheet forming. In: Special Edition: Material Forming ESAFORM 2012, S. 883–888. DOI: 10.4028/www.scientific.net/KEM.504-506.883

G. Sebastiani; A. Wawrosch; V. Franzen; Alexander Brosius; Tekkaya A. Erman (2012): Inkrementelle Blechumformung flexibel unterstützen FlexDie – Ein flexibles Werkzeugkonzept für die asymmetrische inkrementelle Blechumformung (AIBU). In: Werkstattstechnik : wt, S. 645–650. DOI: 10.4028/www.scientific.net/KEM.504-506.883.

Marion Merklein; J.M. Allwood; B.-A. Behrens; Alexander Brosius; H. Hagenah; Karl Kuzman et al. (2012): Bulk forming of sheet metal. In: CIRP Annals - Manufacturing Technology 61 (2), S. 725–745. DOI: 10.1016/j.cirp.2012.05.007.

O. Demir; L. Kwiatkowski; Alexander Brosius; Tekkaya A. Erman (Hg.) (2012): Exceeding the forming limit curve with deep drawing followed by electromagnetic calibration. Online verfügbar unter https://eldorado.tu-dortmund.de/handle/2003/29509.

Q. Yin; Alexander Brosius; Tekkaya A. Erman (2012): Möglichkeiten des ebenen Torsionsversuchs für die Charakterisierung des Verfestigungsverhaltens von Blechwerkstoffen. In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis. Deutschland: Verlag Stahleisen GmbH, S. 51–56.

Q. Yin; C. Soyarslan; A. Güner; Alexander Brosius; Tekkaya A. Erman (2012): A cyclic twin bridge shear test for the identification of kinematic hardening parameters. In: International Journal of Mechanical Sciences 59 (1), S. 31–43. DOI: 10.1016/j.ijmecsci.2012.02.008.

T. Kloppenborg; Alexander Brosius; Tekkaya A. Erman (Hg.) (2012): Optimierung des Verbundstrangpressens. In: 15. Workshop Simulation in der Umformtechnik, Optimierung von Prozessen in der Blech- und Massivumformung, Stuttgart, Germany, pp. 8-18.

T. Mennecart; Alexander Brosius; J. Kolbe; Tekkaya A. Erman (2012): Prediction of the forming behaviour of tailor welded blanks using a modified mixture rule. In: Lightweighting: possibilities & Challenges: Part-I, S. 361–366.

Y. Kiliclar; Demir O. K.; Vladimirov I. N.; L. Kwiatkowski; Alexander Brosius (Hg.) (2012): Combined simulation of quasi-static deep drawing and electromagnetic forming by means of a coupled damageviscoplasticity model at finite strains. Online verfügbar unter https://eldorado.tu-dortmund.de/handle/2003/29509.