Publications
2024
Sauer, H., Lange, M.: "On the Origin of “Rotating Instabilities”—Stability and Frequency Studies of Channel Flows." ASME. J. Turbomach. October 2024; 146(10): 104501. https://doi.org/10.1115/1.4065158
Chen, X., Lange, M., Koppe, B., Jasmund, C., Chu, W., Mailach, R.:
"Criteria for the Occurrence of Tip Leakage Flow Induced Rotating Instability “
ASME TURBO Expo 2024, London, GT2024-126921.
Türke, A., Schlüter, L., Voigt, M., Schmidt, M., Vogel, A., Mailach, R.:
“Probabilistic Analysis of Leading Edge Erosion Behavior of a High-Pressure Compressor in a Turbofan Engine” ASME TURBO Expo 2024, London, GT2024-122239
Wiegand, M., Schuchard, L., Krüger, T., Mailach, R.:
"Development of a Modular Engine Performance Calculation Tool for Prediction of Conventional and Hybrid-Electric Aircraft Engines“ ASME TURBO Expo 2024, London, GT2024-125821.
Emmrich, E., Islam, T., Voigt, M., Bruder, L., von Lautz, L., Mailach, R.:
"Possibilities of Applying Machine Learning Techniques for Probabilistic Analysis in a Turbine Blade-Disk Interface“ ASME TURBO Expo 2024, London, GT2024-122477.
Wiegand, M., Prots, A., Meyer, M., Schmidt, R., Voigt, M., Mailach, R.:
"Robust Design Optimization of a Compressor Rotor Using Recursive Cokriging Based Multi-Fidelity Uncertainty Quantification and Multi-Fidelity Optimization“ ASME TURBO Expo 2024, London, GT2024-121977.
Kossakowski, R., Gier, S., Endrulat, E., Voigt, M., Mailach, R.:
"Analysis of Irreversible Thermochromic Paints for High Temperature Applications Using Specular Reflectance and Roughness Measurement“ ASME TURBO Expo 2024, London, GT2024-121206.
Krewinkel, R., Voigt, M., Mailach, R.:
"Thermo-fluiddynamisches Framework zur probabilistischen Auslegung von Gasturbinen", 9 Apr. 2024, 18. Statusseminar der AG Turbo, 18, S. VNr. - 8-1 - VNr. - 8-19 19 S.
Schuchard, L., Bień, M., Ziaja, K., Blanken, N., Göing, J., Friedrichs, J., di Mare, F., Ponick, B., and Mailach, R.: "A Study on Quantities Driving Maintenance, Repair, and Overhaul for Hybrid-Electric Aeroengines"
ASME. J. Eng. Gas Turbines Power. February 2024; 146(2): 021013
https://doi.org/10.1115/1.4063580
2023
Windemuth, C., Lange, M., Mailach, R.
"Comparison of Steam Turbine Control Valve Geometries and their Dynamic Behaviour at Part Load"
Int. J. Turbomach. Propuls. Power 2023, 8(4), 55; https://doi.org/10.3390/ijtpp8040055
Windemuth, C., Lange, M., Mailach, R.
"Comparison of Steam Turbine Control Valve Geometries and their Dynamic Behaviour at Part Load"
Proceedings of the 15th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics (ETC15). Budapest, Hungary, April 24-28, 2023. ETC2023-138
Krüger, T., Wiegand, M., Condriuc, I., Schuchard, L., Mailach, R.: “Ein modulares Leistungsrechnungsprogramm für konventionelle und hybrid-elektrische Flugantriebe”
Deutscher Luft- und Raumfahrtkongress, DLRK2023-610332, Stuttgart, 2023
urn:nbn:de:101:1-2023102712403758656226
Chen, X., Koppe, B., Lange, M., Chu, W., Mailach, R.:
"Influence of Casing Groove on Rotating Instabilities in a Low-Speed Axial Compressor"
J. Turbomach. July 2023, 145(7): 071015.
https://doi.org/10.1115/1.4056863
Vasilopoulos, I., Rostamian, M., Voigt, M., Meyer, M., Mailach, R. "Roughness Investigations on In-Service High-Pressure Compressor Blades – Part I: An Automated Process for High-Fidelity Roughness Measurements." ASME Turbo Expo 2023, GT2023-100809, Boston, USA, 2023
https://doi.org/10.1115/GT2023-100809
Vasilopoulos, I., Adami, P., Voigt, M., Meyer, M., Mailach, R.: "Roughness Investigations on In-Service High-Pressure Compressor Blades – Part II: Roughness Parameterization and CFD-Based Modelling of its Impact on Turbulent Flows." ASME Turbo Expo 2023, GT2023-101157, Boston, USA, 2023
https://doi.org/10.1115/GT2023-101157
Koppe, B., Lange, M., Mailach, R.: "Effect of Incoming Wakes on the Passage Flow of an Axial Compressor Rotor." ASME Turbo Expo 2023, GT2023-102268, Boston, USA, 2023
https://doi.org/10.1115/GT2023-102268
Emmrich, E., Voigt, M., Hörmann, J.M., Bruder, L., Mailach, R.: "Surrogate-Based Robust Optimization of a Blade-Disk Interface." ASME Turbo Expo 2023, GT2023-101522, Boston, USA, 2023
https://doi.org/10.1115/GT2023-101522
Diermeier, F., Voigt, M., Mailach, R., Meyer, M.: "A Machine Learning Approach for Probabilistic Evaluation of Finite Element Analysis." ASME Turbo Expo 2023, GT2023-100532, Boston, USA, 2023
https://doi.org/10.1115/GT2023-100532
Fiedler, B., Müller, Y., Voigt, M., Mailach, R.: "Thermodynamic Optimization of the Cooling System of a High-Pressure-Turbine Blade." ASME Turbo Expo 2023, GT2023-103632, Boston, USA, 2023
https://doi.org/10.1115/GT2023-103632
Schlüter, L., Voigt, M., Schmidt, R., Becker, B., Mailach, R.: "Probabilistic CFD Analysis of a High-Pressure Compressor Under Consideration of Manufacturing and In-Service Variability." ASME Turbo Expo 2023, GT2023-100528, Boston, USA, 2023
https://doi.org/10.1115/GT2023-100528
Prots, A., Schlüter, L., Voigt, M., Meyer, M., Mailach, R., "Sensitivity Analysis of Performance Parameters of a Compressor Blade With Correlated Profile Parameters"
ASME Turbo Expo 2023, GT2023-102442, Boston, USA, 2023
https://doi.org/10.1115/GT2023-102442
Schuchard, L., Bień, M., Ziaja, K., Blanken, N., Göing, J., Friedrichs, J., di Mare, F., Ponick, B., Mailach, R.: "A Study on Quantities Driving Maintenance, Repair, and Overhaul for Hybrid-Electric Aeroengines"
ASME Turbo Expo 2023, GT2023-100915, Boston, USA, 2023
https://doi.org/10.1115/GT2023-100915
Böhm, H., Högner, L., Meyer, M., Mailach, R., Hornig, A., Gude, M.,:
"A Methodology for a Coupled Structural–Computational Fluid Dynamics Analysis of Compressor Rotor Blades Subjected to Ice Impact With Uncertain Impactor Parameters"
J. Eng. Gas Turbines Power. March 2023, 145(3): 031001.
https://doi.org/10.1115/1.4055687
2022
Bien, M., Göing, J., Friedrichs, J., Ziaja, K., di Mare, F., Blanken, N., Cao, Y., Mertens, A., Ponick, B., Schuchard, L., Voigt., M., Mailach, R.: “Modelling Degradation Mechanisms in Hybrid-Electric Aircraft Propulsion Systems”
25th International Symposium on Airbreathing Engines, ISABE-2021-157, Ottawa, Canada, 2022
Diermeier, F., Voigt, M., Mailach, R., Meyer, M.:
"Application of an Advanced Meta Model Selection Algorithm on the Sensitivity Analysis of a Cooled Turbine Blade"
ASME Turbo Expo 2022, GT2022-83123, Rotterdam, The Netherlands, 2022
Prots, A., Schlüter, L., Voigt, M., Mailach, R., Meyer, M.:
„Impact of Epistemic Uncertainty on Performance Parameters of Compressor Blades“ ASME Turbo Expo 2022, GT2022-82579, Rotterdam, The Netherlands, 2022
Chen, X., Koppe, B., Lange, M., Chu, W., Mailach, R.:
"Influence of Casing Groove on Rotating Instabilities in a Low-Speed Axial Compressor"
ASME Turbo Expo 2022, GT2022-82101, Rotterdam, The Netherlands, 2022
Schlüter, L., Voigt, P., Voigt, M., Mailach, R., Schmidt, R., Rostamian, M., Becker, B.:
„The Validation of a Parametric Leading Edge Model for Probabilistic CFD Analyses of Post-Service Compressor Airfoils“
ASME Turbo Expo 2022, GT2022-78309, Rotterdam, The Netherlands, 2022
Ventosa-Molina, J., Koppe, B., Lange, M., Mailach, R., Fröhlich, J.:
"Effects of Rotation on the Flow Structure in a Compressor Cascade"
ASME. J. Turbomach. August 2022; 144(8): 081006.
https://doi.org/10.1115/1.4053537
Chen, X., Koppe, B., Lange, M., Chu, W., Mailach, R.:
"Comparison of Turbulence Modeling for a Compressor Rotor at Different Tip Clearances"
AIAA Journal 2022, 60:2, 1186 – 1198
https://doi.org/10.2514/1.J060468
2021
Chen, X., Koppe, B., Lange, M., Chu, W., Mailach, R.:
"Rotating Instabilities in a Low-Speed Single Compressor Rotor Row with Varying Blade Tip Clearance" Energies, 2021, 14(24), 8369
https://doi.org/10.3390/en14248369
Koppe, B., Lange, M., Mailach, R.
"Influence of Boundary Layer Skew on the Tip Leakage Vortex of an Axial Compressor Stator", ASME J. Turbomach. September 2021, 143(9): 091016.
https://doi.org/10.1115/1.4050628
Windemuth, C.; Lange, M.; Mailach, R.:
"Investigation of Unsteady Pressure Fluctuations in a Simplified Steam Turbine Control Valve" ASME J. Eng. Gas Turbines Power. Aug 2021, 143(8): 081017
https://doi.org/10.1115/1.4049763
Ventosa-Molina, J., Koppe, B., Lange, M., Mailach, R., Fröhlich, J.:
"Effects of Rotation on the Flow Structure in a Compressor Cascade"
ASME Turbo Expo 2021, GT2021-58793, virtual conference, 2021.
ASME. J. Turbomach. August 2022; 144(8): 081006.
https://doi.org/10.1115/1.4053537
Chen, X., Koppe, B., Lange, M., Chu, W., Mailach, R.:
"Performance of Unsteady Reynolds-Averaged Navier-Stokes and Hybrid Scale-Resolving Simulation Approaches in Simulating a Low-Speed Axial Compressor Single Rotor"
ASME Turbo Expo 2021, GT2021-59028, virtual conference, 2021.
Schuchard, L., Dumstorff, P., Voigt, M., De Lazzer, A., Almstedt, H., Mailach, R.:
"Improved Rotor Design With Combined 3d-2d Probabilistic Approach",
ASME Turbo Expo 2021, GT2021-58620, virtual conference, 2021
https://doi.org/10.1115/GT2021-58620
Prots, A., Voigt, M., Magin, P., Danner, F., Mailach, R.:
"Probabilistic Approach for Optimizing Uncertainties of Input Variables to Reach a Desired Confidence Level "
ASME Turbo Expo 2021, GT2021-59442, virtual conference, 2021
Windemuth, C.; Lange, M.; Mailach, R.
Analysis of the Unsteady Flow Field in a Steam Turbine Control Valve Using Spectral Proper Orthogonal Decomposition
Int. J. Turbomach. Propuls. Power 2021, 6(2):11
https://doi.org/10.3390/ijtpp6020011
Engelmann D, Sinkwitz M, di Mare F, Koppe B, Mailach R, Ventosa-Molina J, Fröhlich J, Schubert T, Niehuis R.
Near-Wall Flow in Turbomachinery Cascades—Results of a German Collaborative Project International Journal of Turbomachinery, Propulsion and Power. 2021; 6(2):9
https://doi.org/10.3390/ijtpp6020009
Windemuth, C.; Lange, M.; Mailach, R.:
"Analysis of the Unsteady Flow Field in a Steam Turbine Control Valve Using Spectral Proper Orthogonal Decomposition", Proceedings of the 14th European Turbomachinery Conference, ETC2021-561, Gdansk, Poland, 12–16 April 2021
Ventosa-Molina, J., Lange, M., Mailach, R., Fröhlich, J.:
"Study of Relative Endwall Motion Effects in a Compressor Cascade Through Direct Numerical Simulations." ASME. J. Turbomach. January 2021; 143(1): 011005. https://doi.org/10.1115/1.4049101
De Dominicis, I., Robens, S., Wolfrum, N., Lange, M., Gümmer, V.:Interacting Effects in a Multistage Axial Compressor Using Shrouded and Cantilevered Stators,
Journal of Propulsion and Power, Vol. 37, No. 4, pp. 615-624, 2021
doi: doi/abs/10.2514/1.B37909
Marlene Böttger
Einfluss der lokalen Filmluftentnahme auf Strömungsfeld und Wärmeübergang in einem Turbinenschaufel-Kühlkanal bei Betrachtung verschiedener Rippengeometrien
(Dissertation, Technische Universität Dresden, 2020)
veröffentlicht bei TUDpress 2021, Band 32 der Schriftenreihe aus dem Institut für Strömungsmechanik, Dresden, ISBN: 978-3-95908-439-0
2020
Seume, J., und Mailach, R., 2020: Dubbel: Taschenbuch für den Maschinenbau (Hrsg.: Grote, K.-H., Bender, B., Göhlich, D.), Kapitel R1 „Grundlagen der Strömungsmaschinen“, Springer-Verlag, 26. Auflage.
Prots, A., Högner, L., Voigt, M., Mailach, R., Danner, F.:
"Improved Quality Assessment of Probabilistic Simulations and Application to Turbomachinery"
ASME Turbo Expo 2020, GT2020-16147, virtual conference, 2020
Koppe, B., Lange, M., Mailach, R.:
"Influence of Boundary Layer Skew on the Tip Leakage Vortex of an Axial Compressor Stator"
ASME Turbo Expo 2020, GT2020-15940, virtual conference, 2020
Schuchard, L., Cerutti, S., Voigt, M., Mailach, R.:
"A Statistical Study on HCF Validation Data for Axial Gas Turbine Compressor Blades"
ASME Turbo Expo 2020, GT2020-14946, virtual conference, 2020
https://doi.org/10.1115/GT2020-14946
Voigt, P., Voigt, M., Mailach, R., Abu-Taa, K., Rostamian, M.:
" Introduction of a Novel Parameter Model to Analyze the Geometric Variation of Airfoil Edges of Ex-In-Service Compressor Airfoils"
ASME Turbo Expo 2020, GT2020-14668, virtual conference, 2020
Windemuth, C., Lange, M., Mailach, R.:
"Investigation of Unsteady Pressure Fluctuations in a Simplified Steam Turbine Control Valve"
ASME Turbo Expo 2020, GT2020-14632, virtual conference, 2020
Ventosa-Molina, J., Lange, M., Mailach, R., Fröhlich, J.:
"Study of Relative Endwall Motion Effects in a Compressor Cascade Through Direct Numerical Simulations"
ASME Turbo Expo 2020, GT2020-14612, virtual conference, 2020.
Böttger, M., Lange, M., Mailach, R., Vogeler, K.:
"Experimental Study on the Influence of Film Cooling Hole Extraction on Heat Transfer and Flow Field in Internal Ribbed Cooling Channels of Turbine Blades."
ASME. J. Turbomach. 142(10), 101005, 2020
Högner, L., Voigt, M., Mailach, R., Meyer, M., Gerstberger, U.:
"Probabilistic Finite Element Analysis of Cooled High-Pressure Turbine Blades—Part A: Holistic Description of Manufacturing Variability"
ASME J. Turbomach. Oct 2020, 142(10): 101008
Högner, L., Voigt, M., Mailach, R., Meyer, M., Gerstberger, U.:
"Probabilistic Finite Element Analysis of Cooled High-Pressure Turbine Blades—Part B: Probabilistic Analysis"
ASME J. Turbomach. Oct 2020, 142(10): 101009.
Jan Kamenik, J., Toal, D. J., Keane, A., Högner, L., Meyer, M., Shahpar, S.:
"Modeling and Impact of High-pressure Turbine Blade Trailing Edge Film Cooling Hole Variations"
AIAA Scitech 2020 Forum, AIAA 2020-0905, Orlando, 2020
2019
Böttger, M., Lange, M., Mailach, R., Vogeler, K.
“Experimental Study on the Influence of the Streamwise Position of Film Hole Extraction in Internal Ribbed Cooling Channels of Turbine Blades”
Journal of the Global Power and Propulsion Society. 3: 580–591, 2019.
Sinkwitz, M., Winhart, B., Engelmann, D., di Mare, F., Mailach, R.
“On the Periodically Unsteady Interaction of Wakes, Secondary Flow Development, and Boundary Layer Flow in An Annular Low-Pressure Turbine Cascade: An Experimental Investigation”.
ASME Journal of Turbomachinery, Vol. 141 (9), 091001, 2019.
De Dominicis, I., Robens, S., Wolfrum, N., Lange, M., Gümmer, V.:
"Interacting Flow Effects in the Stages of a Low-Speed Multistage Axial Compressor Using Shrouded and Cantilevered Stators"
AIAA Propulsion and Enery 2019 Forum, Indianapolis, IN, AIAA 2019-3907, 2019
Voigt, P., Högner, L., Fiedler, B., Voigt, M., Mailach, R., Meyer, M., Nasuf, A.:
Comprehensive Geometric Description of Manufacturing Scatter of High Pressure Turbine Nozzle Guide Vanes for Probabilistic CFD Analysis
ASME. J. Turbomach. 2019;141(8):081002-081002-8. doi:10.1115/1.4042892.
Magin, P., Danner, F., Voigt, M., Mailach, R.:
“High Pressure Compressor Aerodynamic Performance at Uncertain Boundary Conditions”.
ASME Turbo Expo 2019, GT2019- 90908, Phoenix, 2019
Högner, L, Voigt, M., Mailach, R., Meyer, M., Gerstberger, U.:
"Probabilistic FE-Analysis of Cooled High Pressure Turbine Blades - Part A: Holistic Description of Manufacturing Variability"
ASME Turbo Expo 2019, GT2019-91205, Phoenix, 2019
Högner, L, Voigt, M., Mailach, R., Meyer, M., Gerstberger, U.:
"Probabilistic FE-Analysis of Cooled High Pressure Turbine Blades - Part B: Probabilistic Analysis"
ASME Turbo Expo 2019, GT2019-91214, Phoenix, 2019
Voigt, P., Voigt, M., Mailach, M., Münzinger, D., Abu-Taa, K., Lange, A.:
"A Novel Methodology for Detecting Foreign Object Damage on Compressor Blading"
ASME Turbo Expo 2019, GT2019-90378, Phoenix, Arizona, USA, 2019.
Windemuth, C., Lange, M., Mailach, R.
“Introduction of a Novel Test Rig for the Investigation of Fluid-Structure Interaction Effects in Steam Turbine Control Valves using an Elastic Model”.
13th European Turbomachinery Conference, ETC2019-006, Lausanne, 2019
Kowalski, J., di Mare, F., Theis, S., Wiedermann, A., Lange, M., Mailach, R.
"Investigation of the Ventilation Flow in a Gas Turbine Package Enclosure".
13th European Turbomachinery Conference, ETC2019-438, Lausanne, 2019.
Schmidt, R., Voigt, M., Mailach, R., 2019: “Latin Hypercube Sampling-Based Monte Carlo Simulation: Extension of the Sample Size and Correlation Control”, in: Hirsch C., Wunsch D., Szumbarski J., Łaniewski-Wołłk Ł., Pons-Prats J. (Eds.) “Uncertainty Management for Robust Industrial Design in Aeronautics”. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Vol 140. Springer.
Schmidt, R., Voigt, M., Pisaroni, M., Nobile, F., Leyland, P., Pons-Prats, J., Bugeda, G., 2019: “Monte Carlo-Based and Sampling-Based Methods and Their Range of Applicability”, in: Hirsch C., Wunsch D., Szumbarski J., Łaniewski-Wołłk Ł., Pons-Prats J. (Eds.) “Uncertainty Management for Robust Industrial Design in Aeronautics”. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Vol 140. Springer.
Sinkwitz, M., Winhart, B., Engelmann, D., di Mare, F., Mailach, R., 2019:
"Experimental and Numerical Investigation of Secondary Flow Structures in an Annular Low Pressure Turbine Cascade Under Periodic Wake Impact—Part 1: Experimental Results"
J. Turbomach. 2019;141(2):021008 doi:10.1115/1.4042284
Winhart, B., Sinkwitz, M., Schramm, A., Engelmann, D., di Mare, F., Mailach, R., 2019: "Experimental and Numerical Investigation of Secondary Flow Structures in an Annular Low Pressure Turbine Cascade Under Periodic Wake Impact—Part 2: Numerical Results"
J. Turbomach. 2019;141(2):021009 doi:10.1115/1.4042283
Böttger, M., Lange, M., Mailach, R., Vogeler, K., 2019:
“Experimental Study on the Influence of the Streamwise Position of Film Hole Extraction in Internal Ribbed Cooling Channels of Turbine Blades”.
GPPS Zürich 2019, GPPS-TC-2019-0019, 2019
2018
Kamenik, J., Voutchkov, I., Toal, D., Keane, A., Högner, L., Meyer, M., Bates, R.:
"Robust Turbine Blade Optimization in the Face of Real Geometric Variations"
Journal of Propulsion and Power, 34(6), pp. 1479–1493, 2018.
Iseni, S., Micallef, D., Engelmann, D., Mailach, R., Nicke, E., and di Mare, F., 2018: “Influence of casing contouring on flutter boundaries of a jet engine fan “, CEAS Aeronautical Journal, DOI 10.1007/s13272-018-0351-y.
Seume, J., und Mailach, R., 2018: Dubbel: Taschenbuch für den Maschinenbau (Hrsg.: Grote, K.-H., Bender, B., Göhlich, D.), Kapitel R1 „Grundlagen der Strömungsmaschinen“, Springer-Verlag, 25. Auflage.
Winhart, B., Sinkwitz, M., Engelmann, D., di Mare, F., and Mailach, R., 2018: “On the Periodically Unsteady Interaction of Wakes, Secondary Flow Development and Boundary Layer Flow in an Annular LPT Cascade. Part 2: Numerical Investigation”, ASME Paper No. GT2018- 76873, ASME Turbo Expo, June 11-15, 2018, Oslo, Norway.
Sinkwitz, M., Winhart, B., Engelmann, D., di Mare, F., and Mailach, R., 2018: “On the Periodically Unsteady Interaction of Wakes, Secondary Flow Development and Boundary Layer Flow in an Annular LPT Cascade. Part 1: Experimental Investigation”, ASME Paper No. GT2018- 76802, ASME Turbo Expo, June 11-15, 2018, Oslo, Norway.
Voigt, P., Högner, L., Fiedler, B., Voigt, M., Mailach, R., Meyer, M.,
Nasuf, A.,
Comprehensive Geometric Description of Manufacturing Scatter of High Pressure Turbine Nozzle Guide Vanes for Probabilistic CFD Analysis
ASME Turbo Expo 2018, GT2018-76723, Oslo, 2018.
Kniefs, M., Lange, M., Mailach, R., Iseni, S., Micallef, D., di Mare, F.,
"The Influence of Circumferential Grooves on the Flutter Stability of a
Transonic Fan",
ASME Turbo Expo 2018, GT2018-76422, Oslo, 2018.
Lange, M., Rolfes, M., Mailach, R. and Schrapp, H. "Periodic Unsteady Tip Clearance Vortex Development in a Low-Speed Axial Research Compressor at Different Tip Clearances". ASME J. Turbomach., 140(3), p.031005, doi: 10.1115/1.4038319, 2018
2017
Schmidt, R., Voigt, M., Vogeler, K. und Meyer, M. „Comparison of Two Methods for Sensitivity Analysis of Compressor Blades,“ ASME J. Turbomach., 139(11), p.111006, doi: 10.1115/1.4037127,2017.
Hodzic, O., Sinkwitz, M., Schramm, A., Iseni, S., Engelmann, D., di Mare, F., and Mailach, R., 2017: „Design of a low pressure turbine stage with control stage characteristics for investigations of partial admission effects”, ISROMAC: International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Dec. 16-21, 2017, Maui, Hawaii, USA.
Sinkwitz, M., Winhart, B., Engelmann, D., di Mare, F., and Mailach, R., 2017: „Experimental and Numerical Investigation of Secondary Flow Structures in an Annular LPT Cascade under Periodical Wake Impact – Part 1: Experimental Results”, ISROMAC: International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Dec. 16-21, 2017, Maui, Hawaii, USA.
Winhart, B., Sinkwitz, M., Schramm, A., Engelmann, D., di Mare, F., and Mailach, R., 2017: „Experimental and Numerical Investigation of Secondary Flow Structures in an Annular LPT Cascade under Periodical Wake Impact – Part 2: Numerical Results”, ISROMAC: International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Dec. 16-21, 2017, Maui, Hawaii, USA.
Peeren, C., Vogeler, K. "Geometrical Modification of the Unsteady Pressure to Reduce Low-Pressure Turbine Flutter", J. Turbomach 139(9), 091011 (May 02, 2017) (11 pages) Paper No: TURBO-16-1239; doi: 10.1115/1.4036343.
Kowalski, J., Lauer, M., Engelmann, D., Mailach, R. and Cagna, M., di Mare, F., 2017: “Development of a Novel Test Rig to Investigate Explosion Safety in Gas Turbine Enclosures“, International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), December 16-21, 2017, Maui, USA
Maywald, T., Backhaus, T., Schrape, S., Kühorn, A. "Geometric Model Update of Blisk and its Experimental Validation for a Wide Frequency Range" ASME Turbo Expo, GT2017-63446, Charlotte, 2017.
Backhaus, T., Harding, M., Schrape, S., Voigt, M., Mailach, R. "Validation Methods for 3D Digitizing Precision Concerning Jet Engine BLISKs" Deutscher Luft- und Raumfahrtkongress, München, 2017.
Rolfes, M., Lange, M., Vogeler, K., Mailach, R. "Experimental and Numerical Investigation of a Circumferential Groove Casing Treatment in a Low Speed Axial Research Compressor at Different Tip Clearances". ASME Journal Turbomachinery, 139(12), p.121009, doi: 10.1115/1.4037822, 2017.
Knebel, S., Baum, O., Högner, L., Voigt, M., Mailach, R., Meyer, M., "Robust Detection and Characterization of Cooling Holes Based on Surface Meshes of Turbine Blades", ASME Turbo Expo 2017, GT2017-64776, Charlotte, 2017.
Högner, L., Knebel, S., Voigt, M., Mailach, R., Meyer, M., "Quantification of X-Ray Measurement Uncertainty Based on Optical Measurement Data of Turbine Blades", ASME Turbo Expo, GT2017-63704, Charlotte, 2017.
Backhaus, T., Maywald, T., Schrape, S., Voigt, M., Mailach, R. "A Parametrization Describing Blisk Airfoil Variations Referring to Modal Analysis" ASME Turbo Expo, Charlotte, GT2017-64243, 2017.
Rolfes, M., Lange, M., Mailach, R. "Investigation of Performance and Rotor Tip Flow Field in a Low Speed Research Compressor with Circumferential Groove Casing Treatment at Varying Tip Clearance". International Journal of Rotating Machinery, vol. 2017, Article ID 4631751, 2017.
Lange, M., Rolfes, M., Mailach, R., Schrapp, H. "Periodical Unsteady Tip Clearance Vortex Development in a Low Speed Axial Research Compressor at different Tip Clearances". ASME Turbo Expo, GT2017-64256, 2017.
Sinkwitz, M., Engelmann, D., Mailach, R. "Experimental Investigation of Periodically Unsteady Wake Impact on Secondary Flow in a 1.5 Stage Full Annular LPT Cascade With Modified T106 Blading". ASME Turbo Expo, GT2017-64390, 2017.
Rolfes, M., Lange, M., Vogeler, K., Mailach, R. "Experimental and Numerical Investigation of a Circumferential Groove Casing Treatment in a Low Speed Axial Research Compressor at Different Tip Clearances". ASME Turbo Expo, GT2017-63051, 2017.
Krug, A., Busse, P., Lange, M., Vogeler, K., Mailach R. "Challenges of creating realisitc periodical unsteady inflow conditions in a linear compressor cascade". European Conference on Turbomachinery Fluid dynamics and Thermodynamics, Paper No. ETC2017-241, 2017.
Beschorner, A., Lange, M., Mailach, R., Vogeler, K. "Experimental and numerical investigation of a low aspect ratio transonic linear turbine cascade." Proceedings of 12th European Conference on Turbomachinery Fluid dynamics and Thermodynamics, Paper No. ETC2017-237, 2017.
Reuter, I., Voigt, M., Mailach, R., Becker, K.-H., Fischersworring-Bunk, A., Schlums, H., Ivankovic, M. „Moving Least Squares Metamodels - Hyperparameter, Variable Reduction and Model Selection“. In 14th International Probabilistic Workshop, Eds.: R. Caspeele, L. Taerwe, and D. Proske, 63–80. Cham: Springer International Publishing, 2017.
Reuter, I., Voigt, M., Mailach, R., Becker, K.-H., Fischersworring-Bunk, A., Schlums, H., Ivankovic, M. „Strukturmechanische Blisk-Auslegung unter Verwendung von Metamodellen“. Deutscher Luft- und Raumfahrtkongress, München, 2017.
Reuter, I., Beschorner, A., Voigt, M., Mailach, R. "Comparative study to improve model selection based on Cross-Validation". 15th International Probabilistic Workshop, Dresden, 2017.
Stricker, M., Mailach, R., Vogeler, K. "Anforderungen an das Sekundärluftsystem neuer, auf der isochoren Verbrennung basierender Flugantriebe". Deutscher Luft- und Raumfahrtkongress, München, 2017.
2016
Aulich, A.-L., Sauer, T., Iseni, S., Moreau, A., Peitsch, D., Mailach, R., Micallef, D., Enghardt, L., and Nicke, E., 2016: “Fan casing contouring under consideration of aeroacoustics, mechanics, aeroelasticity, and whole engine performance“, CEAS Aeronautical Journal, 2016, DOI 10.1007/s13272-016-0226-z.
Iseni, S., Micallef, D., and Mailach, R.
“Investigation of Inlet Distortion on the Flutter Stability of a Highly Loaded Transonic Fan Rotor”, ASME Paper No.GT2016-56593. ASME Turbo Expo, June 13-17, 2016, Seoul, South Korea.
Marcel Gottschall
Gestaltung von Radialspalt- und Seitenwandgeometrien an verstellbaren Axialverdichterstatoren
(Dissertation, Technische Universität Dresden, 2016)
veröffentlicht bei TUDpress 2016, Band 18 der Schriftenreihe aus dem Institut für Strömungsmechanik, Dresden, ISBN: 9783959080712
Alexander Lange
Probabilistische Performanceuntersuchung eines Hochdruckverdichters unter Berücksichtigung geometrischer Variabilität
(Dissertation, Technische Universität Dresden, 2015)
veröffentlicht bei TUDpress 2016, Band 17 der Schriftenreihe aus dem Institut für Strömungsmechanik, Dresden, ISBN: 978-3-95908-046-0
Kay Heinze
Eine Methode für probabilistische Untersuchungen zum Einfluss von Fertigungsstreuungen auf die hochzyklische Ermüdung von Verdichterschaufeln
(Dissertation, Technische Universität Dresden, 2015)
veröffentlicht bei TUDpress 2016, Band 15 der Schriftenreihe aus dem Institut für Strömungsmechanik, Dresden, ISBN: 978-3-95908-036-1
Pusch, D., Dumstorff, P., Almstedt, H., Voigt, M., Vogeler, K.
Setup, Validation and Probabilistic Robustness Estimation of a Model for Prediction of LCF in Steam Turbine Rotors
ASME Paper GT2016-57321, 61st ASME Turbo Expo, Seoul, South Korea, June 13-17, 2016.
Busse, P., Krug, A., Lange, M., Vogeler, K., Mailach, R.
"Effects of Turbulent Boundary Conditions on the Prediction of the Secondary Flow Field in a Linear Compressor Cascade".
ASME Paper GT2016-56455, 61th ASME Turbo Expo, Seoul, South Korea, June 13th-17th, 2016.
Schmidt, R., Voigt, M., Vogeler, K., Meyer, M.
Comparison of two Methods for Sensitivity Analysis of Compressor Blades
ASME Turbo Expo, GT2016-57378, Seoul, 2016.
Högner, L., Nasuf, A., Voigt, P., Voigt, M., Vogeler, K., Meyer, M., Berridge, C., Geonaga, F.,
Analysis of High Pressure Turbine Nozzle Guide Vanes Considering Geometric Variations
ASME Turbo Expo, GT2016-57502, Seoul, 2016.
2015
Högner, L., Meyer, M., Berridge, C., Voigt, M., Vogeler, K.
A Curvature Based Algorithm for Treatment of Cooling Holes in Polygon Meshes of Turbine Blades
ASME Turbo Expo, GT2015-42841, Montréal, 2015.
Voigt, M., Vogeler, K., Högner, L., Backhaus, T., Meyer, M., Scharfenstein, J. "Geometric Parametrization, an Important but Often Overlooked Prerequisite for the Probabilistic Analysis of Turbomachinery Blades". IGTC 2015, Paper No. WeAME.2, Tokyo, 2015.
Schrade, M., Staudacher, S., Voigt, M.
Experimental and Numerical Investigation of Erosive Change of Shape under Boundary Conditions Specific for High-Pressure Compressors
ASME Turbo Expo, GT2015-42061, Montréal, 2015.
Rolfes, M., Lange, M., Vogeler, K.
Experimental Investigation of Circumferential Groove Casing Treatments for Large Tip Clearances in a Low Speed Axial Research Compressor
ASME Turbo Expo, GT2015-42646, Montréal, 2015.
2014
A. Tesch, M. Lange, K. Vogeler, J. Ortmanns, E. Johann, V. Gümmer
An Experimental Investigation of a Tandem-Stator Flow Characteristic in a Low Speed Axial Research Compressor
ASME Turbo Expo, GT2014-26104, Düsseldorf, 2014.
A. Tesch, M. Lange, K. Vogeler, J. Ortmanns, E. Johann, V. Gümmer
Experimental and Numerical Investigation of a Single Stage Low Speed Axial Compressor with Tandem-Stator focusing on the Variation of the Second Airfoil Relative Position
Deutscher Luft- und Raumfahrtkongress, DLRK2014-340219, Augsburg, 2014.
Busse, P., Vogeler, K.
Problem-specific Grid Adaptations for Investigations on Rotor-Stator-Interaction in a Linear Compressor Cascade
Proceedings of the 1st TRACE User Conference, DLR Köln-Porz, Germany, March 24th-28th, 2014.
Krug, A., Busse, P., Vogeler, K.
Effects of the Steady - Wake Tip Clearance Vortex Interaction in a Compressor Cascade – Part I: Experimental Investigations
ASME Paper GT2014-26120, 59th ASME Turbo Expo, Düsseldorf, Germany, June 16th-20th, 2014.
Busse, P., Krug, A., Vogeler, K.
Effects of the Steady - Wake Tip Clearance Vortex Interaction in a Compressor Cascade – Part II: Numerical Investigations
ASME Paper GT2014-26121, 59th ASME Turbo Expo, Düsseldorf, Germany, June 16th-20th, 2014.
Krug, A., Busse, P., Vogeler, K.
Experimental Investigation Into the Effects of the Steady Wake-Tip Clearance Vortex Interaction in a Compressor Cascade
ASME J. Turbomach. 137(6), 61006 (10pages), doi: 10.1115/1.4028797.
Beschorner, A., Voigt, M., Vogeler, K., 2014.
Monte carlo cross validation for response surface benchmark
Proceedings of the 12th International Probabilistic Workshop, 2014.
(online version: doi: 10.1466/20141125.01).
Schmidt, R., Voigt, M., Vogeler, K., 2014
Extension of Latin Hypercube samples while maintaining the correlation structure
Proceedings of the 12th International Probabilistic Workshop, 2014.
(online version: doi: 10.1466/20141125.01).
I. Reuter, T. Weiss, M. Voigt, K. Vogeler, H. Schlums, K.-H. Becker, A. Fischersworring-Bunk:
Probabilistische Untersuchung und Detailoptimierung von Rotoren für Turbomaschinen
Tagungsband zum 14. Statusseminar der AG Turbo, DLR Köln-Porz, 2014.
Schmidt, R., Pusch, D., Voigt, M., Vogeler, K., Kulawinski, D., Biermann, H., Holländer, D., Gampe, U., Tränkner, M. and Leyens, C., 2014
Numerical and Experimental Sensitivity Analysis for the Determination of Casting Parameter–Microstructure–Property Relations and Mechanical Properties of IN738LC in Investment Casting
Adv. Eng. Mater., doi: 10.1002/adem.201400189.
Lange, M., 2014
Strömungsmechanische Untersuchungen an Axialverdichter-Statoren mit und ohne Deckband bei großen Spaltweiten
(Dissertation, Technische Universität Dresden),
TUDpress 2014, Band 7 der Schriftenreihe aus dem Institut für Strömungsmechanik, Band 7, Dresden, ISBN: 978-3-944331-44-7.
2013
Beschorner, A., Vogeler, K., Goldhahn, E., Huhnd, M.
Experimental and numerical investigation to extend the validity range of a turbine loss correlation for ultra-low aspect ratios in transonic flow
Paper No. 85, 10th European Turbomachinery Conference, Lappeenranta, Finland, 2013.
Kunze, M.
Experimental Investigations of Platform Film-Cooling in Highly-Loaded Turbine Vanes (Dissertation, Technische Universität Dresden),
TUDpress 2013, Band 4 der Schriftenreihe aus dem Institut für Strömungsmechanik, Dresden, ISBN: 978-3-944331-36-2, 2013.
Kunze, M.
Einfluss der Rippenposition in einem Kühlkanal auf die Filmkühlung und den inneren Wärmeübergang
(Abschlussbericht DFG VO 820/8-1, Technische Universität Dresden),
TUDpress 2013, Band 5 der Schriftenreihe aus dem Institut für Strömungsmechanik, Dresden, ISBN: 978-3-944331-39-3, 2013.
Pusch, D., Schmidt, R., Voigt, M., Vogeler, K.
Probabilistische numerische Untersuchung zum Einfluss variierender Gießparameter und Geometrie auf die Gefügequalität von Feingussprodukten
Proceedings of International Colloquium of the Cluster of Excellence ECEMP 2013.
Gottschall, M. and Vogeler, K.
Vortex development induced by part gap geometry and endwall configurations for variable stator vanes in a compressor cascade
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy doi: 10.1177/0957650913495539, 2013.
Kunze, M., Vogeler, K., Crawford, M., Brown, G.
Single and Multiple Row Endwall Film-Cooling of a Highly-Loaded First Turbine Vane with Variation of Loading
ASME J. Turbomach. vol.136(6), pp. 061012-1 – 061012-14, doi: 10.1115/1.4025688, 2013.
Lange, M., Vogeler, K., Mailach, R., Gomez, S.
An Experimental Verification of a New Design for Cantilevered Stators With Large Hub Clearances
ASME Journal of Turbomachinery, vol. 135(4), pp. 041022-041022-9, doi:10.1115/1.4007612, 2013.
Kunze, M., Vogeler, K.
Flow Field Investigations on the Effect of Rib Placement in a Cooling Channel With Film-Cooling
ASME J. Turbomach. vol.136(3), pp. 031009-1 – 031009-13, doi: 10.1115/1.4024691, 2013.
Kunze, M., Vogeler, K.
Flow Field Investigations on the Effect of Rib Placement in a Cooling Channel With Film-Cooling
ASME Paper GT2013-94096, 58th ASME Turbo Expo, San Antonio TX, USA, June 3rd-7th, 2013.
Heinze K., Scharfenstein J., Voigt M., Vogeler K., Meyer M.
A parametric model for probabilistic analysis of turbine blades considering real geometric effects
CEAS Aeronautical Journal, 2013. DOI: 10.1007/s13272-013-0088-6.
Scharfenstein, J., Heinze, K., Meyer, M., Voigt, M., Vogeler, K.
Probabilistic CFD analysis of high pressure turbine blades considering real geometric effects
ASME Turbo Expo, GT2013-94161, San Antonio, 2013.
I. Reuter, T. Weiss, M. Voigt, K. Vogeler, H. Schlums, K.-H. Becker, A. Fischersworring-Bunk
Probabilistic Structure-Mechanical Assessment of Rotor Discs Considering Geometry Variations
ASME Turbo Expo, GT2013-94589, San Antonio, 2013.
Gottschall, M. and Vogeler, K.
Vortex development induced by part gap geometry and endwall configurations for variable stator vanes in a compressor cascade
Paper No. 159, 10th European Turbomachinery Conference, Lappeenranta, Finland, 2013.
2012
M. Lange, K. Vogeler, S. E. Gomez
Wirkungsgradoptimierte Statoren
Tagungsband zum 13. Statusseminar der AG Turbo, DLR Köln-Porz, 2012.
P. Scholz, I. Reuter, D. Heitmann
PIV measurements of the flow through an intake port using refractive index matching
16th Int Symp on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 2012.
M. Lange, K. Vogeler, R. Mailach
Tip and Hub Clearance Vortex Development due to Rotor-Stator-Interactions in Axial Compressors
The 13th International Symposium on Unsteady Aerodynamics, Aeroacoustics and
Aeroelasticity of Turbomachines, ISUAAAT-S4-5, Tokyo, 2012.
Gottschall, M., Mailach, R., and Vogeler, K.
The effect of two different endwall-penny concepts for variable stator vanes in a compressor cascade
Paper No. GT2012-68404, ASME Turbo Expo, Copenhagen, Denmark, 2012.
Gottschall, M., Mailach, R., and Vogeler, K.
The effect of four part gap geometry configurations for variable stator vanes in a compressor cascade
Paper No. GT2012-69757, ASME Turbo Expo, Copenhagen, Denmark, 2012.
Gottschall, M., Mailach, R., and Vogeler, K.
Effect of penny gap geometry on performance and secondary flow field in a compressor cascade
AIAA Journal of Propulsion and Power, 28(5):9. [DOI: 10.2514/1.B34536].
Fischer, A., Büttner, L., Czarske, J., Gottschall, M., Mailach, R., and Vogeler, K.
Investigation of the tip clearance flow in a compressor cascade using a novel laser measurement technique with high temporal resolution
ASME Journal of Turbomachinery 134:051004, 2012 [DOI: 10.1115/1.4004754].
T. van Lil, M. Voigt, K. Vogeler, C. Wacker, U. Rockstroh
Probabilistic analysis of radial gear compressors
ASME Turbo Expo, GT2012-69647, Kopenhagen, 2012.
A. Lange, M. Voigt, K. Vogeler, H. Schrapp, E. Johann, V. Gümmer
Impact of manufacturing variability on multi-stage high-pressure compressor performance
ASME Turbo Expo, GT2012-69571, Kopenhagen, 2012.
Heinze, K.; Schrape, S.; Voigt, M.; Vogeler, K.
Probabilistic endurance level analyses of compressor blades
CEAS Aeronautical Journal, 2012, DOI: 10.1007/s13272-012-0043-y.
A. Lange, M. Voigt, K. Vogeler, E. Johann
Principal component analysis on 3D scanned compressor blades for probabilistic CFD simulation
14th AIAA Non-Deterministic Approaches Conference, Honolulu, Hawaii, 2012.
2011
Künzelmann, M., Urban, R., Mailach, R., and Vogeler, K.:
Active flow control at a 1.5 stage low speed research compressor with varying rotor tip clearance
IMechE Journal of Power and Energy Part A: Journal of Power and Energy, Volume: 225 issue: 7, page(s): 886-896, 2011.
Best Paper Award 2011 of the European Turbomachinery Committee Künzelmann, M., Urban, R., Mailach, R., and Vogeler, K.
Active flow control at a 1.5 stage low speed research compressor with varying rotor tip clearance
9th European Turbomachinery Conference, March 21 - 25, 2011, Istanbul, Turkey.
Fischer, A., Büttner, L., Czarske, J., Gottschall, M., Mailach, R., and Vogeler, K.
Investigation of the tip clearance flow in a compressor cascade using a novel laser measurement technique with high temporal resolution
Paper No. GT2011-45176, ASME Turbo Expo 2011, Vancouver, Canada, 2011.
T. van Lil, M. Voigt, K. Vogeler
Probabilistic analysis of radial gear compressors
9th International Probabilistic Workshop, Braunschweig, 2011.
Sauer, H., Schmidt, R., Vogeler, K., 2011:
Influence of Chord Length and Inlet Boundary Layer on the Secondary Losses of Turbine Blades
ASME Journal of Turbomachinery, Vol. 134, Issue 1, pp. 011015-1 - 011015-10.
A. Lange, M. Voigt, K. Vogeler, H. Schrapp, E. Johann, V. Gümmer
Impact of manufacturing variability and non-axisymmetry on high-pressure compressor stage performance
ASME Turbo Expo, GT2011-45718, Vancouver, 2011;
Journal of Engineering for Gas Turbines and Power, GTP-11-1154.
2010
A. Lange, M. Voigt, K. Vogeler
Robustheitsverbesserung des strömungsmechanischen Verhaltens einer Verdichterschaufel
3. Dresdner Probabilistik-Workshop, Dresden, 2010 (http://www.probabilistik.de).
A. Fischer, L. Büttner, J. Czarske, M. Gottschall, R. Mailach, K. Vogeler
Untersuchung der Spaltströmung eines ebenen Verdichtergitters mittels Doppler-Global-Velozimeter mit Laserfrequenzmodulation
18. GALA-Fachtagung "Lasermethoden in der Strömungsmesstechnik", 07.-09. September 2010, Cottbus, Germany.
A. Fischer, L. Büttner, J. Czarske, M. Gottschall, R. Mailach, K. Vogeler
Doppler-Global-Velozimeter With Laser Frequency Modulation for the Analysis of Complex Turbulent Flows
15th International Sympossium on Applications of Laser Techniques to Fluid Mechanics, Paper No. 1557, July 5-8, 2010, Lisbon, Portugal.
K. Heinze, W. H. Friedl, K. Vogeler
The Impact of geometric scatter on High-Cycle-Fatigue of Compressor Blades
ASME Turbo Expo, GT2010-22083, Glasgow, 2010.
M. Lange, R. Mailach, K. Vogeler
An Experimental Investigation of Shrouded and Cantilevered Compressor Stators at Varying Clearance Sizes
ASME Turbo Expo, GT2010-22106, Glasgow, 2010.
A. Lange, M. Voigt, K. Vogeler, H. Schrapp, E. Johann, V. Gümmer
Probabilistic CFD simulation of a high-pressure compressor stage taking manufacturing variability into account
ASME Turbo Expo, GT2010-22484, Glasgow, 2010.
Jia, H., Xi, G., Müller, L., Mailach, R., and Vogeler, K.
Unsteady Blade Loading with Clocking in Multistage Axial Compressors, Part 1: Numerical Investigation
AIAA Journal of Propulsion and Power, 2010.
Müller, L., Mailach, R., Vogeler, K., Jia, H., and Xi, G.
Unsteady Blade Loading with Clocking in Multistage Axial Compressors, Part 2: Experimental Investigation
AIAA Journal of Propulsion and Power, 2010.