Anja Lode
Table of contents
© SW
Postdoc
NameDr. rer. nat. Anja Lode
Group leader Bioprinting and head of cell culture
Send encrypted email via the SecureMail portal (for TUD external users only).
Beiträge in Zeitschriften
| 118 | S. Liu, D. Kilian, A. Bernhardt, K. Wirsig, M. von Witzleben, S. Duin, A. Lode, Q. Hu, M. Gelinsky: Novel protein-rich bioactive bioink stimulates cellular proliferation and response in 3D bioprinted volumetric constructs. Adv Healthcare Mater 2025, 2404470 (19 pages) Full text |
| 117 | S. Dani, S. Duin, K. Schütz, J. Windisch, A. Bernhardt, B. Ludwig, M. Gelinsky, A. Lode: The effect of light on a bioprinted co-culture system of murine rat islets and photosynthetically active microalgae. Procedia CIRP 2024, 125, 325 - 330 Full text |
| 116 | A. R. Akkineni, A. Lode, M. Gelinsky: 3D bioprinting of Gelatin-Alginate bioinks for biofabrication of in vitro liver sinusoid model. Procedia CIRP 2024, 125, 96-100 Full text |
| 115 | C. Vater, C. Bräuer, S. Grom, T. Fecht, T. Ahlfeld, M. v. Witzleben, A.-M. Placht, K. Schütz, J. M. Schehl, T. Wolfram, F. Reinauer, M. Scharffenberg, J. Wittenstein, A. Hoess, S. Heinemann, M. Gelinsky, G. Lauer, A. Lode: Poly(DL-lactide) polymer blended with mineral phases for extrusion 3D printing – studies on degradation and biocompatibility. Polymers 2024 , 16, 1254 (27 pages) Full text |
| 114 | S. Dani, K. Schütz, E. Dikici, A. Bernhardt, A. Lode: Blinded by the lights: The effect of continuous long-term illumination with visible light in different spectral ranges on mammalian cells. Scientific Reports 2024, 14, 9444 Full text |
| 113 | S. Ray, U. Thormann, I, Kramer, U. Sommer, M. Budak, M. Schumacher, A. Bernhardt, A. Lode, C. Kern, M. Rohnke, C. Heiss, K. S. Lips, M. gelinsky, V. Alt: Mesoporous Bioactive Glass-Incorporated Injectable Strontium-Containing Calcium Phosphate Cement Enhanced Osteoconductivity in a Critical-Sized Metaphyseal Defect in Osteoporotic Rats. Bioengineering 2023, 10, 1203 (24 pages) Full text |
| 112 | T. Ahlfeld, A. Lode, A.-M. Placht, T. Fecht, T. Wolfram, S. Grom, A. Hoess, C. Vater, Ch. Bräuer, S. Heinemann, G. Lauer, F. Reinauer, M. Gelinsky: A comparative analysis of 3D printed scaffolds consisting of poly(lactic-co-glycolic) acid and different bioactive mineral fillers: aspects of degradation and cytocompatibility. Biomater Sci 2023, 11, 5590 - 5604 Full text |
| 111 | R.F. Richter, C. Vater, M. Korn, T. Ahlfeld, M. Rauner, W. Pradel, B. Stadlinger, M. Gelinsky, A. Lode, P. Korn: Treatment of critical bone defects using calcium phosphate cement and mesoporous bioactive glass providing spatiotemporal drug delivery. Bioact Mater 2023, 28, 402 - 419 Full text |
| 110 | S. Liu, A. Bermhardt, K. Wirsig, A. Lode, Q. Hu, M. Gelinsky, D. Kilian:
Synergy of inorganic and organic inks in bioprinted tissue substitutes: Construct stability and cell response during long-term cultivation in vitro. |
| 109 | J. Windisch, O. Reinhardt, S. Duin, K. Schütz, N. J. Novoa Rodriguez, S. Liu, A. Lode, M. Gelinsky: Bioinks for space missions: the influence of long-term storage of alginate-methylcellulose based bioinks on printability as well as cell viability and function. Adv Health Mater 2023, 12, 2300436 (19 pages) Full text |
| 108 | C. Vater, M. Hetz, M. Quade, A. Lode, M. Gelinsky, S. Rammelt, S. Zwingenberger, H. Bretschneider: Combined Application of BMP-2 and Naturally Occurring Bioactive Factor Mixtures for the Optimized Therapy of Segmental Bone Defects. Acta Biomater 2023, 157, 162 - 174 Full text |
| 107 | D. Kilian, S. Holtzhausen, W. Groh, P. Sembdner, C. Czichy, A. Lode, R. Stelzer, M. Gelinsky: 3D extrusion printing of density gradients by variation of sinusoidal printing paths for tissue engineering and beyond. Acta Biomater 2023 , 158, 308 - 323 Full text |
| 106 | D. Kilian, A. Poddar, V. Desrochers, C. Heinemann, N. Halfter, S. Liu, S. Rother, M. Gelinsky, V. Hintze, A. Lode: Cellular adhesion and chondrogenic differentiation inside an alginate-based bioink in response to tailorable artificial matrices and tannic acid treatment. Biomater Adv 2023, 147, 213319 (17 pages) Full text |
| 105 | R. F. Richter, T. Ahlfeld, M. Gelinsky, A. Lode: Composites consisting of calcium phosphate cements and mesoporous bioactive glasses as a 3D plottable drug delivery system. Acta Biomat 2023, 156, 146 - 157 Full text |
| 104 | F. Krujatz, S. Dani, J. Windisch, J. Emmermacher, F. Hahn, M. Mosshammer, S. Murthy, J. Steingroewer, M. Kühl, Th. Walther, M. Gelinsky, A. Lode: Think outside the box: 3D bioprinting concepts for biotechnological applications – recent developments and future perspectives. Biotechnol Adv 2022 in press |
| 103 | R. Taymour, N. A. Chicaiza-Cabezas, M. Gelinsky, A. Lode: Core-shell bioprinting of vascularized in vitro liver sinusoid models. Biofabrication 2022, 14, 045019 (22 pages) Full text |
| 102 | S. Dani, J. Windisch, X. M. V. Guerrero, A. Bernhardt, M. Gelinsky, F. Krujatz, A. Lode: Selection of a suitable photosynthetically active microalgae strain for the co-cultivation with mammalian cells. Front Bioengin Biotechnol 2022 (accepted) |
| 101 | S. Duin, S. Bhandarkar, S. Lehmann, E. Kemter, E. Wolf, M. Gelinsky, B. Ludwig, A. Lode: Viability and functionality of neonatal porcine islet-like cell clusters bioprinted in alginate-based bioinks. Biomed 2022, 10, 1420 (22 pages) Full text |
| 100 | D. Kilian, M. v. Witzleben, M. Lanaro, C. S. Wong, C. Vater, A. Lode, M. C. Allenby, M. A. Woodruff, M. Gelinsky: 3D plotting of calcium phosphate cement and melt electrowriting of polycaprolactone microfibers in one scaffold: a hybrid additive manufacturing process. J Funct Biomater 2022, 13, 75 (24 pages) Full text |
| 99 | Ch. Czichy, D. Kilian, T.-Ch. Wang, S. Günther, A. Lode, M. Gelinsky, S. Odenbach: CyMAD bioreactor: a cyclic magnetic actuation device for magnetically mediated mechanical stimulation of 3D bioprinted hydrogel scaffolds. J Mech Behav Biomed Mater 2022, 131, 105253 (13 pages) Full text |
| 98 | A. R. Akkineni, B. S. Elci, A. Lode, M. Gelinsky: Addition of high acyl gellan gum to low acyl gellan gum enables the blends 3D bioprintable. Gels 2022, 8, 199 (15 pages) Full text |
| 97 | B. Paul, A. Lode, A.-M. Placht, A. Voß, A. Gebert, M. Gelinsky, J. Hufenbach: Cell−Material Interactions in Direct Contact Culture of Endothelial Cells on Biodegradable Iron-Based Stents Fabricated by Laser Powder Bed Fusion and Impact of Ion Release. ACS Appl Mater Interface 2022, 14, 439 - 451 Full text |
| 96 | D. Kilian, S. Cometta, A. Bernhardt, R. Taymour, J. Golde, T. Ahlfeld, J. Emmermacher, M. Gelinsky, A. Lode: Core-shell bioprinting as a strategy to apply differentiation factors in a spatially defined manner inside osteochondral tissue substitutes. Biofabrication 2022, 14, 014108 (24 pages) Full text |
| 95 | A. R. Akkineni, J. Spangenberg, M. Geissler, S. Reichelt, H. Buechner, A. Lode, M. Gelinsky: Controlled and Local Delivery of Antibiotics by 3D Core/Shell Printed Hydrogel Scaffolds to Treat Soft Tissue Infections. Pharmaceutics 2021, 13, 2151 (21 pages) Full text |
| 94 | S. Dani, T. Ahlfeld, F. Albrecht, S. Duin, P. Kluger, A. Lode, M. Gelinsky: Homogeneous and Reproducible Mixing of Highly Viscous Biomaterial Inks and Cell Suspensions to Create Bioinks. Gels 2021, 7, 227 (17 pages) Full text |
| 93 | M. T. Ross, D. Kilian, A. Lode, J. Ren, M. C. Allenby, M. Gelinsky, M. A. Woodruff: Using melt-electrowritten microfibres for tailoring scaffold mechanics of 3D bioprinted chondrocyte-laden constructs. Bioprinting 2021 , 23, e00158 Full text |
| 92 | Ph. Sembdner, D. Kilian, D. Hofmann, St. Holtzhausen, T. Ahlfeld, A. Lode, R. Stelzer, M. Gelinsky: Bildgebungsbasiertes individuelles Design und additive Fertigung von osteochondralen Knochenersatzstrukturen. In: R. Lachmayer, K. Rettschlag, S. Kaierle (eds.): Konstruktion für die Additive Fertigung 2020. Springer Vieweg 2021, 19 - 35 Full text |
| 91 | H. Bretschneider, M. Quade, A. Lode, M. Gelinsky, S. Rammelt, C. Vater: Chemotactic and Angiogenic Potential of Mineralized Collagen Scaffolds Functionalized with Naturally Occurring Bioactive Factor Mixtures to Stimulate Bone Regeneration. Int J Mol Sci 2021 , 22, 5836 Full text |
| 90 | D. Kilian, Ph. Sembdner, H. Bretschneider, T. Ahlfeld, L. Mika, J. Lützner, St. Holtzhausen, A. Lode, R. Stelzer, M. Gelinsky: 3D printing of patient-specific implants for osteochondral defects – workflow for an MRI-guided zonal design. Bio-Des Manuf 2021, 4, 818 - 832 Full text |
| 89 | V. Guduric, N. Belton, R. F. Richter, A. Bernhardt, J. Spangenberg, C. Wu, A. Lode, M. Gelinsky: Tailorable zinc-substituted mesoporous bioactive glass/alginate-methylcellulose composite bioinks. Materials 2021, 14, 1225 (21 pages) Full text |
| 88 | R. Taymour, D. Kilian, T. Ahlfeld, M. Gelinsky, A. Lode: 3D bioprinting of hepatocytes – core-shell structured co-cultures with fibroblasts for enhanced functionality. Sci Rep 2021, 11, 5130 (18 pages) Full text |
| 87 | T. Ahlfeld, A. Lode, R. F. Richter, W. Pradel, A. Franke, M. Rauner, B. Stadlinger, G. Lauer, M. Gelinsky, P. Korn: Toward biofabrication of resorbable implants consisting of a calcium phosphate cement and fibrin – a characterization in vitro and in vivo. Int J Mol Sci 2021, 22, 1218 Full text |
| 86 | J. Spangenberg, D. Kilian. C. Czichy, T. Ahlfeld, A. Lode, S. Günther, S. Odenbach, M. Gelinsky: Bioprinting of Magnetically Deformable Scaffolds. ACS Biomater Sci Eng 2021, 7, 648 - 662 Full text |
| 85 | D. Kilian, T. Ahlfeld, A. R. Akkineni, A. Bernhardt, M. Gelinsky, A. Lode: 3D Bioprinting of osteochondral tissue substitutes – in vitro-chondrogenesis in multi-layered mineralized constructs. Sci Rep 2020, 10, 8277 (17 pages) Full text |
| 84 | T. Ahlfeld, V. Guduric, S. Duin, A. R. Akkineni, K. Schütz, D. Kilian, J. Emmermacher, N. Cubo-Mateo, S. Dani, M. v. Witzleben, J. Spangenberg, R. Abdelgaber, R. F. Richter, A. Lode, M. Gelinsky: Methylcellulose – a versatile printing material that enables biofabrication of tissue equivalents with high shape fidelity. Biomater Sci 2020, 8, 2102 - 2110 Full text |
| 83 | J. Emmermacher, D. Spura, J. Cziommer, D. Kilian, T. Wollborn, U. Fritsching, J. Steingroewer, T. Walther, M. Gelinsky, A. Lode: Engineering considerations on extrusion-based bioprinting: Interactions of material behaviour, mechanical forces and cells in the printing needle. Biofabrication 2020, 12, 025022 (21 pages) Full text |
| 82 | P. Korn, T. Ahlfeld, F. Lahmeyer, D. Kilian, P. Sembdner, R. Stelzer, W. Pradel, A. Franke, M. Rauner, U. Range, B. Stadlinger, A. Lode, G. Lauer, M. Gelinsky: 3D Printing of Bone Grafts for Cleft Alveolar Osteoplasty –in vivo Evaluation in a Preclinical Model. Front Bioeng Biotechnol 2020, 8, 217, (16 pages) Full text |
| 81 | T. Ahlfeld, N. Cubo-Mateo, S. Cometta, V. Guduric, C. Vater, A. Bernhardt, A. R. Akkineni, A. Lode, M. Gelinsky: A Novel Plasma-based Bioink Stimulates Cell Proliferation and Differentiation in Bioprinted, Mineralized Constructs.
ACS Appl Mater Interfaces 2020, 12, 11, 12557-12572 Full text |
| 80 | R. Schmidt, A. Gebert, M. Schumacher, V. Hoffmann, A. Voss, S. Pilz, M. Uhlemann, A. Lode, M. Gelinsky: Electrodeposition of Sr-substituted hydroxyapatite on low modulus beta-type Ti-45Nb and effect on in vitro Sr release and cell response. Mater Sci Eng C 2020, 108, 110425 Full text |
| 79 | R. F. Richter, T. Ahlfeld, M. Gelinsky, A. Lode: Development and characterization of composites consisting of calcium phosphate cements and mesoporous bioactive glass for extrusion-based fabrication. Materials 2019, 12, 2022 (16 pages) Full text |
| 78 | S. Duin, K. Schütz, T. Ahlfeld, S. Lehmann, A. Lode, B. Ludwig, M. Gelinsky: 3D Bioprinting of Functional Islets of Langerhans in an Alginate/Methylcellulose Hydrogel-Blend. Adv Healthcare Mater 2019 (accepted) |
| 77 | E. Trampe, K. Koren, A. R. Akkineni, Ch. Senwitz, F. Krujatz, A. Lode, M. Gelinsky, M. Kühl: Functionalized bioink with optical sensor nanoparticles for O2 imaging in 3D bioprinted constructs. Adv. Funct. Mater 2018 (accepted) |
| 76 | T. Ahlfeld, T. Köhler, Ch. Czichy, A. Lode, M. Gelinsky: A Methylcellulose Hydrogel as Support for 3D Plotting of Complex Shaped Calcium Phosphate Scaffolds. Gels 2018, 4, 68 (14 pages) Full text |
| 75 | T. Ahlfeld, F. Doberenz, D. Kilian, C. Vater, P. Korn, G. Lauer, A. Lode, M. Gelinsky: Bioprinting of mineralized scaffolds utilizing multichannel plotting of a self-setting calcium phosphate cement and a cell-laden bioink. Biofabrication 2018, 10, 045002 (14 pages) Full text |
| 74 | M. V.J. Braham, T. Ahlfeld, A. R. Akkineni, M. C. Minnema, W. J. A. Dhert, F. C. Öner, C. Robin, A. Lode, M. Gelinsky, J. Alblas: Endosteal and perivascular subniches in a 3D bone marrow model for multiple myeloma. Tissue Engin C Methods 2018, 24, 300 - 312 Full text |
| 73 | M. Quade, A. Lode, A. Gabrielyan, A. Rösen-Wolff, M. Gelinsky: Therapie von Knochendefekten mit geringer Regenerationskapazität. Orthopädische Nachrichten 2018, 4,14 Full text |
| 72 | B. Rentsch, A. Bernhardt, A. Henss, S. Ray, C. Rentsch, M. Schamel, U. Gbureck, M. Gelinsky, S. Rammelt, A. Lode: Trivalent chromium incorporated in a crystalline calcium phosphate matrix accelerates materials degradation and bone formation in vivo. Acta Biomater 2018, 69, 332 - 341 Full text |
| 71 | J. Hufenbach, F. Kochta, H. Wendrock, A. Voß, L. Giebeler, S. Oswald, S. Pilz, U. Kühn, A. Lode, M. Gelinsky, A. Gebert: S and B microalloying of biodegradable Fe-30Mn-1C - Effects on microstructure, tensile properties, in vitro degradation and cytotoxicity. Materials & Design 2018, 142, 22 - 35 Full text |
| 70 | M. Quade, M. Schumacher, A. Bernhardt, A. Lode, M. Kampschulte, A. Voss, P. Simon, O. Uckermann, M. Kirsch, M. Gelinsky: Strontium-modification of porous scaffolds from mineralized collagen for potential use in bone defect therapy. Mater Sci Eng C 2018, 84, 159–167 Full text |
| 69 | Lode, A.; Heiss, C.; Knapp, G.; Thomas, J.; Nies, B.; Gelinsky, M. and Schumacher, M.: Strontium-modified premixed calcium phosphate cements for the therapy of osteoporotic bone defects. Acta Biomater 2018 , 65, 475-485 Full text |
| 68 | J. Steingroewer, C. Haas, K. Winkler, C. Schott, J. Weber, J. Seidel, F. Krujatz, S. Kümmritz, A. Lode, M. L. Socher, M. Gelinsky, T. Bley: Monitoring of Plant Cells and Tissues in Bioprocesses. In: A. Pavlov, T. Bley (eds.): Bioprocessing of Plant In Vitro SYstems, Reference Series in Phytochemistry. Springer 2016, 1-49 Full text |
| 67 | A. Henß, M. Schamel, U. Gbureck, M. Gelinsky, A. Lode: Data on TOF-SIMS analysis of Cu2+, Co2+ and Cr3+ doped calcium phosphate cements. Data Brief 2017, 13, 353 - 355 Full text |
| 66 | D. Kilian, T. Ahlfeld, A. R. Akkineni, A. Lode, M. Gelinsky: 3D Bioprinting of Volumetric Tissues and Organs. MRS Bull 2017, 42, 582 - 592 Full text |
| 65 | T. Ahlfeld, G. Cidonio, D. Kilian, S. Duin, A. Akkineni, J. Dawson, S. Yang, A. Lode, R. Oreffo, M. Gelinsky: Development of a clay based bioink for 3D cell printing for skeletal application. Biofabrication 2017, 9, e034103 (16 pages) Full text |
| 64 | J. Seidel, T. Ahlfeld, M. Adolph, S. Kümmritz, J. Steingroewer, F. Krujatz, Th. Bley, M. Gelinsky, A. Lode: Green Bioprinting: Extrusion-based fabrication of plant cell-laden biopolymer hydrogels scaffolds. Biofabrication 2017, 9, e045011 (11 pages) Full text |
| 63 | V. V. Mutsenko, O. Gryshkov , L. Lauterboeck, O. Rogulska, D. N. Tarusin, Vasilii V. Bazhenov d, K. Schütz, S. Brüggemeier, E. Gossla, A. R. Akkineni, H. Meißner , A. Lode, St. Meshke, J. Fromont, A. L. Stelling, K. R. Tabachniki, M. Gelinsky, S. Nikuling, S. Rodink, A. G. Tonevitskyk Alexander Y. Petrenko, B. Glasmacher, P. Schupp, H. Ehrlich: Novel chitin scaffolds derived from marine sponge Ianthella basta for tissue engineering approaches based on human mesenchymal stromal cells:Biocompatibility and cryopreservation. Int J Biol Macromol 2017, 4, 1955 - 1965 Full text |
| 62 | Quade, M., Knaack, S., Akkineni, A.R., Gabrielyan, A., Lode, A., Rösen-Wolff, A., Gelinsky, M.: Central growth factor loaded depots in bone tissue engineering scaffolds for enhanced cell attraction. Tissue Engin A 2017 (accepted) |
| 61 | M. Schumacher, L. Reither, J. Thomas, M. Kampschulte, U. Gbureck, A. Lode, M. Gelinsky: Calcium phosphate bone cement/mesoporous bioactive glass composites for controlled growth factor delivery. Biomater. Sci. 2017, 5, 578 - 588 Full text |
| 60 | M. Schamel, A. Bernhardt, M. Quade, C. Würkner, U. Gbureck, C. Moseke, M. Gelinsky, A. Lode: Cu2+, Co2+ and Cr3+ doping of a calcium phosphate cement influences materials properties and response of human mesenchymal stromal cells. Mat Sci Eng C 2017, 73, 99 - 110 Full text |
| 59 | M. Quade, S. Knaack, D. Weber, U. König, B. Paul, P. Simon, A. Rösen-Wolff, R. Schwartz-Albiez, M. Gelinsky, A. Lode: Heparin modification of a biomimetic bone matrix modulates osteogenic and angiogenic cell response in vitro. Eur Cell Mater 2017, 33, 105-120 Full text |
| 58 |
S. Giron, A. Lode, M. Gelinsky: In situ functionalisation of scaffolds during extrusion based 3D plotting using a piezoelectric nanolitre pipette. |
| 57 |
A. R. Akkineni, T. Ahlfeld, A. Lode, M. Gelinsky: A versatile method for combining different biopolymers in a core/shell fashion by 3D plotting to achieve mechanically robust constructs. |
| 56 | T. Ahlfeld, A. R. Akkineni, Y. Förster, T. Köhler, S. Knaack, M. Gelinsky, A. Lode: Design and fabrication of complex scaffolds for bone defect healing: combined 3D plotting of a calcium phosphate cement and a growth factor-loaded hydrogel. Ann Biomed Eng 2017, 45, 224 - 236 Full text |
| 55 | A. R. Akkineni, T. Ahlfeld, A. Funk, A. Waske, A. Lode, M. Gelinsky: Highly concentrated alginate/gellan gum composites for 3D plotting of complex tissue engineering scaffolds. Polymers 2016, 8, 170 (16 pages) Full text |
| 54 | A. Lode, M. Meyer, S. Brüggemeier, B. Paul, H. Baltzer, M. Schröpfer, C. Winkelmann, F. Sonntag, M. Gelinsky: Additive manufacturing of collagen scaffolds by three-dimensional plotting of highly viscous dispersions. Biofabrication 2016, 8, 015015 (13 pages) Full text |
| 53 | K. Schütz, A.-M. Placht, B. Paul, S. Brüggemeier, M. Gelinsky, A. Lode: 3D plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions. J Tissue Eng Regen Med 2015 in press |
| 52 | K. Schütz, F. Despang, A. Lode, M. Gelinsky: Cell-laden biphasic scaffolds with anisotropic structure for the regeneration of osteochondral tissue. J Tissue Eng Regen Med 2016, 10, 404–417 Full text |
| 51 | A. R. Akkineni, Y. Luo, M. Schumacher, B. Nies, A. Lode, M. Gelinsky: 3D plotting of growth factor loaded calcium phosphate cement scaffolds. Acta Biomater 2015, 27, 264-274 Full text |
| 50 | F. Krujatz, A. Lode, S. Brüggemeier, K. Schütz, J. Kramer, Th. Bley, M. Gelinsky, J. Weber: Green bioprinting: viability and growth analysis of microalgae immobilized in 3D-plotted hydrogels versus suspension cultures. Eng Life Sci 2015, 15, 678-688 Full text |
| 49 | K. Schütz, A.-M. Placht, B. Paul, S. Brüggemeier, M. Gelinsky, A. Lode: 3D plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions. J Tissue Eng Regen Med 2017, 11, 1574 - 1587 Full text |
| 48 | A. Lode, F. Krujatz, S. Brüggemeier, M. Quade, K. Schütz, S. Knaack, J. Weber, T. Bley, M. Gelinsky: Green bioprinting: fabrication of photosynthetic algae-laden hydrogel scaffolds for biotechnological and medical applications. Eng Life Sci 2015, 15, 177-183 Full text |
| 47 | K. Schütz, F. Despang, A. Lode, M. Gelinsky: Cell-laden biphasic scaffolds with anisotropic structure for the regeneration of osteochondral tissue. J Tissue Eng Reg Med 2016, 10, 404–417 Full text |
| 46 | F. Despang, A. Bernhardt, A. Lode, R. Dittrich, Th. Hanke, S. J. Shenoy, S. Mani, A. John, M. Gelinsky: Synthesis, physico-chemical and in vitro/vivo evaluation of an anistropic, nano-crystalline hydroxyapatite bisque scaffold with parallel aligned pores mimicking the microstructure of cortical bone. J Tissue Eng Reg Med 2013, 9, E152 - 166 Full text |
| 45 | Y. Luo, A. Lode, A. R. Akkineni, M. Gelinsky: Concentrated gelatin/alginate composites for fabrication of predesigned scaffolds with favorable cell response by 3D plotting. RSC Adv 2015, 5, 43480-43488 Full text |
| 44 | Y. Luo, A. Lode, Ch. Wu, J. Chang, M. Gelinsky: Alginate/nano-hydroxyapatite scaffolds with designed core/shell structures fabricated by 3D plotting and in situ mineralization for bone tissue engineering. ACS Appl Mater Interfaces 2015, 7, 6541–6549 Full text |
| 43 | Y. Luo, A. Lode, M. Gelinsky: Direct plotting of three-dimensional hollow fiber scaffolds based on concentrated alginate pastes for tissue engineering. Adv Healthcare Mater 2013, 2, 777-783 Full text |
| 42 | C. Winkelmann, Y. Luo, A. Lode, M. Gelinsky, U. Marx, F. Sonntag: Hollow fibres integrated in a microfluidic cell culture system. Biomed Tech (Berl.) 2012 in press |
| 41 | S. Knaack, A. Lode, B. Hoyer, A. Rösen-Wolff, A. Gabrielyan, M. Gelinsky: Heparin modification of a biomimetic bone matrix for controlled release of VEGF. J Biomed Mater Res A 2014, 102(10), 3500-3511 Full text |
| 40 | A. Lode, K. Meißner, Y. Luo, F. Sonntag, S. Glorius, B. Nies, C. Vater, F. Despang, Th. Hanke, M. Gelinsky: Fabrication of porous scaffolds by 3D plotting of a pasty calcium phosphate bone cement under mild conditions. J Tissue Eng Reg Med 2014, 8(9), 682-693 Full text |
| 39 | Y. Luo, A. R. Akkineni, A. Lode, M. Gelinsky: Three dimensional plotting is a versatile rapid prototyping method for the customized manufacturing of complex scaffolds and tissue engineering constructs. Chin J Repar Reconstr Surg 2014, 28, 279-285 Full text |
| 38 | U. König, A. Lode, P.B. Welzel, Y. Ueda, S. Knaack, A. Henß, A. Hauswald, M. Gelinsky: Heparinization of a biomimetic bone matrix – integration of heparin during matrix synthesis versus adsorptive surface modification. J Mater Sci Mater Med 2014, (3) 607-621 Full text |
| 37 | B. Hoyer, A. Bernhardt, A. Lode, S. Heinemann, J. Sewing, M. Klinger, H. Notbohm, M. Gelinsky: Jellyfish collagen scaffolds for cartilage tissue Engineering. Acta Biomater 2014, 10(2), 883–892 Full text |
| 36 | M. Schumacher, A. Lode, A. Helth, M. Gelinsky: A novel strontium(II)-modified calcium phosphate bone cement stimulates hMSC proliferation and osteogenic differentiation in vitro. Acta Biomater 2013, 9, 9547-9557Full text |
| 35 | N. Tödtmann, A. Lode, R. Mann, R. Mai, G. Lauer, K. Wieczorek, U. Eckelt: Influence of different modifications of a calcium phosphate cement on resorption and new bone formation: an in vivo study in the minipig. J Biomed Mater Res B Appl Biomater 2013, 101B, 1410-1418 Full text |
| 34 | I. Tsyganov, A. Lode, Th. Hanke, A. Kolitsch, M. Gelinsky: Osteoblast responses to novel titanium-based surfaces produced by plasma- and ion beam technologies. RSC Adv., 2013,3, 11205-11213 Full text |
| 33 | Y. Luo, A. Lode, F. Sonntag, B. Nies, M. Gelinsky: Well-ordered biphasic calcium phosphate/alginate scaffolds fabricated by multi-channel 3D plotting under mild conditions. J Mater Chem 2013, 1, 4088-4098 Full text |
| 32 | S. Mobini, B. Hoyer, M. Solati-Hashjin, A. Lode, N. Nosoudi, A. Samadikuchaksaraei, M. Gelinsky: Fabrication and characterization of regenerated silk scaffolds reinforced with natural silk fibers for bone tissue engineering. J Biomed Mater Res A 2013, 101A, 2392–2404 Full text |
| 31 | A. Bernhardt, R. Dittrich, A. Lode, F. Despang, M. Gelinsky: Nanocrystalline spherical hydroxyapatite granules for bone repair – in vitro evaluation with osteoblast-like cells and osteoclasts. J Mater Sci Mater Med 2013, 24, 1755-1766 Full text |
| 30 | Y. Luo, A. Lode, M. Gelinsky: Direct plotting of three-dimensional hollow fiber scaffolds based on concentrated alginate pastes for tissue engineering. Adv Healthcare Mater 2013, 2, 777-783 Full text |
| 29 | A. Bernhardt, A. Lode, F. Peters, M. Gelinsky: Comparative evaluation of different calcium phosphate-based bone graft granules - an in vitro study with osteoblasts. Clin Oral Impl Res 2013, 24, 441-449 Full text |
| 28 | Y. Luo, Ch. Wu, A. Lode, M. Gelinsky: Hierarchical mesoporous bioactive glass/alginate composite scaffolds fabricated by three-dimensional plotting for bone tissue engineering. Biofabrication 2013, 5, 015005 |
| 27 | S. Knaack, A. Lode, A. Gabrielyan, A. Rösen-Wolff, M. Gelinsky: Ein neues Konzept für die Knochendefektheilung: Funktionalisierte Biomaterialien zur gerichteten Zellmigration. Orthopädische Nachrichten 2012, 10, 21 |
| 26 | M.C. Schulz, A. Lode, S. Wittig, B. Stadlinger, E. Kuhlisch, U. Eckelt, M. Gelinsky, R. Mai: Characterisation of the osseointegration of Algipore® and Algipore® modified with mineralised collagen type I. Oral Surg Oral Med Oral Pathol Oral Radiol Endodont 2012, 114(S5), 160-166 |
| 25 | A. Bernhardt, A. Lode, F. Peters, M. Gelinsky: Optimization of culture conditions for osteogenically-induced mesenchymal stem cells in β-tricalcium phosphate ceramics with large interconnected channels. J Tissue Eng Reg Med, 2011, 5, 444-453 |
| 24 | A. Bernhardt, A. Lode, F. Peters, M. Gelinsky: Novel ceramic bone replacement material Osbone in a comparative in vitro study with osteoblasts. Clin Oral Impl Res 2011, 22, 651-657 |
| 23 | C. Heinemann, S. Heinemann, A. Bernhardt, A. Lode, H. Worch, T. Hanke: In vitro osteoclastogenesis on textile chitosan scaffold. Eur Cell Mater 2010, 19, 96-106 |
| 22 | C. Vater, A. Lode, A. Bernhardt, A. Reinstorf, B. Nies, M. Gelinsky: Modifications of a calcium phosphate cement with biomolecules - influence on nanostructure, material and biological properties. J Biomed Mater Res A 2010, 95A, 912-925 |
| 21 | A. Bernhardt, A. Lode, S. S. Babu, A. Vogel, Th. Hanke, S. Thieme, H. K. Varma, A. Rösen-Wolff, M. Gelinsky, A. John: In vitro characterisation of bone cell activity on triphasic ceramic composites from calcium silicate, beta-tricalciumphosphate and hydroxyapatite. J Clin Rehab Tissue Eng Res 2010, 14, 3033-3040 |
| 20 | F. Peters, A. Bernhardt, A. Lode, M. Gelinsky: OsBone - eine neue, synthetische Biokeramik für den Knochenersatz. Regenerative Medizin 2010, 3, 18-22 |
| 19 | C. Vater, A. Lode, A. Bernhardt, A. Reinstorf, C. Heinemann, M. Gelinsky: Influence of different modifications of a calcium phosphate bone cement on adhesion, proliferation and osteogenic differentiation of human bone marrow stromal cells. J Biomed Mater Res A 2010, 92A, 1452-1460 |
| 18 | F. Despang, A. Bernhardt, A. Lode, Th. Hanke, D. Handtrack, B. Kieback, M. Gelinsky: Response of human bone marrow stromal cells to a novel ultra-fine grained and dispersion strengthened titanium-based material. Acta Biomater 2010, 6, 1006-1013 |
| 17 | C. Heinemann, S. Heinemann, A. Lode, A. Bernhardt, H. Worch, Th. Hanke: In vitro evaluation of textile chitosan scaffolds for tissue engineering using human bone marrow stromal cells. Biomacromolecules 2009, 10, 1305-1310 |
| 16 | A. Bernhardt, A. Lode, C. Mietrach, U. Hempel, Th. Hanke, M. Gelinsky: In vitro osteogenic potential of human bone marrow stromal cells cultivated in porous scaffolds from mineralised collagen. J Biomed Mater Res A 2009, 90A, 852-862 |
| 15 | M. Nair, A. Bernhardt, A. Lode, C. Heinemann, S. Thieme, Th. Hanke, H. K. Varma, M. Gelinsky, A. John: A bioactive triphasic ceramic coated hydroxyapatite promotes proliferation and osteogenic differentiation of human bone marrow stromal cells. J Biomed Mater Res A 2009, 90A, 533-542 |
| 14 | A. Lode, A. Bernhardt, K. Kroonen, M. Springer, A. Briest, M. Gelinsky: Development of a mechanically stable support for the osteoinductive biomaterial COLLOSS E. J Tissue Eng Reg Med 2009, 3, 54-62 |
| 13 | A. Bernhardt, F. Despang, A. Lode, A. Demmler, T. Hanke, M. Gelinsky: Proliferation and osteogenic differentiation of human bone marrow stromal cells on alginate/hydroxyapatite scaffolds with anisotropic pore structure. J Tissue Eng Reg Med 2009, 3, 54-62 |
| 12 | A. John, H. K. Varma, S. Vijayan, A. Bernhardt, A. Lode, A. Vogel, B. Burmeister, Th. Hanke, H. Domaschke, M. Gelinsky: In vitro investigation of bone remodeling on a transparent hydroxyapatite ceramic. Biomed Mater 2009, 4, 015007 |
| 11 | A. Lode, A. Bernhardt, M. Gelinsky: Cultivation of human bone marrow stromal cells on three-dimensional scaffolds of mineralized collagen: influence of seeding density on colonization, proliferation and osteogenic differentiation. J Tissue Eng Reg Med 2008, 2, 400-407 |
| 10 | A. Lode, A. Reinstorf, A. Bernhardt, C. Wolf-Brandstetter, U. König, M. Gelinsky: Heparin modification of calcium phosphate bone cements for VEGF functionalization. J Biomed Mater Res A 2008, 86A, 749-759 |
| 9 | A. Bernhardt, A. Lode, S. Boxberger, W. Pompe, M. Gelinsky: Mineralised collagen - an artificial, extracellular bone matrix - improves osteogenic differentiation of bone marrow stromal cells. J Mater Sci Mater Med 2008, 19, 269-275 |
| 8 | A. Lode, C. Wolf-Brandstetter, A. Reinstorf, A. Bernhardt, U. König, W. Pompe, M. Gelinsky: Calcium phosphate bone cements, functionalized with VEGF: release kinetics and biological activity. J Biomed Mater Res A 2007, 81A, 474-483 |
| 7 | C. Wolf-Brandstetter, A. Lode, Th. Hanke, D. Scharnweber, H. Worch: Influence of modified extracellular matrices on TI6AL4V implants on binding and release of VEGF. J Biomed Mater Res A 2006, 79A, 882-894 |
| 6 | A. Lode, C. Paret, G. Rödel: Molecular characterization of Saccharomyces cerevisiae Sco2p reveals a high degree of redundancy with Sco1p. Yeast 2002, 19, 909-922 |
| 5 | T. Albrecht, A. Koch, A. Lode, B. Greve, J. Schneider-Mergener, M. Steup: Plastidic (Pho1-type) phosphorylase isoforms in potato (Solanum tuberosum L.) plants: expression analysis and immunochemical characterization. Planta 2001, 213, 602-613 |
| 4 | C. Paret, A. Lode, U. Krause-Buchholz, G. Rödel: The P(174)L mutation in the human hSCO1 gene affects the assembly of cytochrome c oxidase. Biochem Biophys Res Commun 2000, 279, 341-347 |
| 3 | A. Lode, M. Kuschel, C. Paret, G. Rödel: Mitochondrial copper metabolism in yeast: interaction between Sco1p and Cox2p. FEBS Lett 2000, 485, 19-24 |
| 2 | C. Paret, K. Ostermann, U. Krause-Buchholz, A. Rentzsch, G. Rödel: Human members of the SCO1 gene family: complementation analysis in yeast and intracellular localization. FEBS Lett 1999, 447, 65-70 |
| 1 | A. Rentzsch, G. Krummeck-Weiss, A. Hofer, A. Bartuschka, K. Ostermann, G. Rödel: Mitochondrial copper metabolism in yeast: mutational analysis of Sco1p involved in the biogenesis of cytochrome c oxidase. Curr Genet 1999, 35, 103-108 |
Beiträge in Büchern
| 5 | F. Despang, C. Halm, K. Schütz, B. Fischer, A. Lode, M. Gelinsky: Fibre reinforced, biphasic composite scaffolds with pore channels and embedded stem cells based on alginate for the treatment of osteochondral defects. In: A. Tampieri (Hrsg.): Bio‐inspired Regenerative Medicine: Materials, Processes and Clinical Applications. Pan Stanford Publishing, Singapur 2016, 145-177 |
| 4 | Y. Luo, A. Lode, Ch. Wu, M. Gelinsky: 3D-plotting of bioceramic scaffolds under physiological conditions for bone tissue engineering. In: Ch. Wu, J. Chang, Y. Xiao (Hrsg.): Advanced Bioactive Inorganic Materials for Bone Regeneration and Drug Delivery CRC Press, Boca Raton (FL, USA) 2013, 83-116 |
| 3 | M. Gelinsky, A. Lode, A. Bernhardt, A. Rösen-Wolff: Stem cell engineering for regeneration of bone tissue. In: G. M. Artmann, J. Hescheler, St. Minger (Hrsg.): Stem Cell Engineering, Part 3, S. 383-399. Springer, Heidelberg und Berlin 2011 |
| 2 | M. Gelinsky, C. Vater, A. Walther, A. Bernhardt, A. Lode, M. Eckert, Th. Hanke, U. König, A. Reinstorf, A. Yokoyama, F. Watari: Biomaterials based on mineralised collagen: an artificial extracellular bone matrix. In: M. Watanabe, O. Okuno (Hrsg.): Interface Oral Health Science 2007, S. 323-328, Springer Japan, Tokio 2008. (ISBN 978-4-431-76689-6) |
| 1 | A. Bernhardt, A. Lode, B. Burmeister, C. Vater, A. Blank, M. Gelinsky: Perfusionskultur von Osteoblasten und osteogen differenzierten mesenchymalen Stammzellen auf mineralisiertem Kollagen. In: R. Poll (Hrsg), J. Füssel (Hrsg), E. Koch (Hrsg) 2. Dresdner Medizintechnik-Symposium: Innovation durch Einheit von Therapie und Monitoring, TUDpress Verlag der Wissenschaften Dresden 2008 [ISBN 13 978-3940046987] |