Publications of the Centre for Translational Bone, Joint and Soft Tissue Research
Table of contents
If you are interested in our work, but you have no acces to the following documents, please do not hestitate to contact us. We are pleased to send the publication electronically.
Publications in books and journals
2025
| 9 | A. Iodchik, G. Lusvardi, A. Zambon, P. S. Lee, H.-P. Wiesmann, A. Bernhardt, V. Hintze: Gelatin/Cerium-Doped Bioactive Glass Composites for Enhancing Cellular Functions of Human Mesenchymal Stem Cells (hBMSCs). Gels 2025, 11, 425 (32 pages) Full text |
| 8 | M. v. Witzleben, S. Liu, P. Sembdner, S. Holtzhausen, S. F. U. Blum, J. Lützner, D. Kilian, U. Nimtschke, M. Gelinsky, A. Lode, H. Bretschneider: Additive manufacturing of patient-specific, biphasic implants with zonal design for regeneration of osteochondral defects – critical evaluation of the work flow from clinical MRI data to implantation. Mater Today Bio 2025, 32, 101858 (13 pages) in press |
| 7 | X. Tian, Y. Liu, S. Liu, Q. Tian, D. B. Raina, M. Gelinsky, S. Zwingenberger: Recent Advances in Spine Surgery: Integration of Biologics and Additive Manufacturing Applications. Mater Today Bio 2025, 32, 101853 (24 pages) in press |
| 6 | J. G. Hunsberger, P. Pandya, M. Mulligan, D. Marotta, L. Moroni, M. Shusteff, G. Brogan, M. Brovold, J. Yoo, J. Koffler, I. Lazarovits, S. Desai, K. Mitra, S. R. Bauer, S. W. Sawyer, J. Schmidt, J. Stoudemire, M. Gelinsky: Review of Disruptive Technologies in 3D Bioprinting. Curr Stem Cell Rep 2025 (accepted) |
| 5 | L. Findeisen, X. Tian, C. Vater. D. B. Raina, H. Kern, J. Bolte, L. Straßburger, L.-M. Matuszewski, N. Modler, R. Gottwald, A. Winkler, K.-D. Schaser, A. C. Disch, S. Zwingenberger: Exploring an Innovative Augmentation Strategy in Spinal Fusion: A Novel Selective Prostaglandin EP4 Receptor Agonist as a Potential Osteopromotive Factor to Enhance Lumbar Posterolateral Fusion. Biomaterials 2025, 123278 (38 pages) in press |
| 4 | G. Kiranmai, S. Chameettachal, Y. Sriya, S. Duin, A. Lode, M. Gelinsky, A. R. Akkineni, F. Pati: Recent trends in the development of in vitro 3D kidney models. Biofabrication 2025, 17, 022010 (25 pages) Full text |
| 3 | S. Liu, D. Kilian, A. Bernhardt, K. Wirsig, M. von Witzleben, S. Duin, A. Lode, Q. Hu, M. Gelinsky: Novel protein-rich bioactive bioink stimulates cellular proliferation and response in 3D bioprinted volumetric constructs. Adv Healthcare Mater 2025, 2404470 (19 pages) Full text |
| 2 | J. Stadter, A. Hoess, H. Leemhuis, A. Herrera, R. Gunther, S. Cho, S. Diederich, G. Korus, R. F. Richter, A. Petersen: Incorporation of metal-doped silicate microparticles into collagen scaffolds combines chemical and architectural cues for endochondral bone healing. Acta Biomater 2025, 192, 260 - 278 Full text |
| 1 |
M. Łępicka, A. Magryś, V. Guduric, A. Roguska, M. U. Rodziewicz, K. Nowicka, M. Wójcik, M. Hołdyński, A. Bernhardt, M. Ptasiewicz, A. Dowbysz, R. Chałas, M. Kalinowska, M. Pisarek, M. Gelinsky, K. J. Kurzydłowski: Talc as an anti-wear functional filler in glass-ionomer cements |
2024
| 26 | D. Hose, S. Ray, S. Rößler, U. Thormann, R. Schnettler, K. de Veirman, T. El Khassawna, C. Heiss, A. Hild, D. Zahner, F. Alagboso, A. Henss, S. Beck, M. Emde-Rajaratnam, J. Burhenne, J. Bamberger, E. Menu, E. De Bruyne, M. Gelinsky, M. Kampschulte, M. Rohnke, S. Wenisch, K. Vanderkerken, T. Hanke, A. Seckinger, V. Alt: Bortezomib-Releasing Silica-Collagen Xerogels for Local Treatment of Osteolytic Bone - and Minimal Residual Disease in Multiple Myeloma. J Hematol Oncol 2024, 17, 128 (20 pages) Full text |
| 25 | A. Schlüßler, E. Tille, R. F. Richter, A. Biewener, R. Apolle, S. Zwingenberger, J. Nowotny: Minimally Invasive Balloon-Reduction Of Hill-Sachs-Lesions And Impression Fractures Of The Humeral Head After Shoulder Dislocation – An Experimental Investigation. JSES Int 2024, 8, 1358 - 1359 Full text |
| 24 | H. Jiang, Y. Ding, Y. Wu, Y. Xie, Q. Tian, C. Yang, Y. Liu, X. Lin, B. Song, H. He, L. Wan, X. Tian: Eupalinolide A Attenuates Trauma-Induced Heterotopic Ossification of Tendon in Mice by Promoting YAP Degradation through TOLLIP-Mediated Selective Autophagy. Phytomedicine 2024, 135, 156163 (11 pages) Full text |
| 23 | S. Dani, S. Duin, K. Schütz, J. Windisch, A. Bernhardt, B. Ludwig, M. Gelinsky, A. Lode: The effect of light on a bioprinted co-culture system of murine rat islets and photosynthetically active microalgae. Procedia CIRP 2024, 125, 325 - 330 Full text |
| 22 | A. R. Akkineni, A. Lode, M. Gelinsky: 3D bioprinting of Gelatin-Alginate bioinks for biofabrication of in vitro liver sinusoid model. Procedia CIRP 2024, 125, 96-100 Full text |
| 21 | P. M. Giraldo-Osorno, K. Wirsig, F. Asa’ad, O. Omar, M. Trobos, A. Bernhardt, A. Palmquist: Macrophage-to-osteocyte communication: Impact in a 3D in vitro implant-associated infection model. Acta Biomater 2024, 186, 141 - 155 Full text |
| 20 | M. Akhtar, P. Peng, A. Bernhardt, M. Gelinsky, M. A. U. Reman, A. R. Boccaccini, B. Basu: Gelatin Methacryloyl (GelMA) - 45S5 Bioactive Glass (BG) Composites for Bone Tissue Engineering: 3D Extrusion Printability and Cytocompatibility Assessment Using Human Osteoblasts. ACS Biomater Sci Eng 2024,10, 5122 - 5135 Full text |
| 19 | C. Willis, M. Calvaruso, D. Angeloni, S. Baatout, A. Benchoua, J. Bereiter-Hahn, D. Bottai, J.-I. Buchheim, E. Carnero-Diaz, S. Castiglioni, D. Cavalieri, G. Ceccarelli, A. Chouker, F. Cialdai, G. Ciofani, G. Coppola, G. Cusella, A. Degl'Innocenti, J.-F. Desaphy, J.-P. Frippiat, M. Gelinsky, G. Genchi, M. Grano, D. Grimm, A. Guignandon, R. Herranz, C. Hellweg, C. S. Iorio, T. Karapantsios, J. v. Loon, M. Lulli, J. Maier, J. Malda, E. Mamaca, L. Morbidelli, A. Osterman, A. Ovsianikov, F. Pampaloni, E. Pavezlorie, V. Pereda-Campos, C. Przybyla, P. Rettberg, A. M. Rizzo, K. Robson-Brown, L. Rossi, G. Russo, A. Salvetti, C. Risaliti, D. Santucci, M. Sperl, K. Tabury, S. Tavella, C. Thielemann, R. Willaert, M. Monici, N. J. Szewczyk: How to obtain an integrated picture of the molecular networks involved in adaptation to microgravity in different biological systems? npj Microgravity 2024, 10, 50 Full text |
| 18 | X. Lin, X. Tian, H. Jiang, W. Li, C. Wang, J. Wu, W. Chen, W. Shi, Q. Tian, X. Gong, Q. Zhou, H. Xu, S. Zwingenberger: Carpaine alleviates tendinopathy in mice by promoting the ubiquitin-proteasomal degradation of p65 via targeting the E3 ubiquitin ligase LRSAM1 Phytomedicine 2024, 124, 155323 (14 pages) Full text |
| 17 | H. Jiang, Y. Ding, X. Lin, Q. Tian, Y. Liu, H. He, Y. Wu, X. Tian, S. Zwingenberger: Malvidin attenuates trauma-induced heterotopic ossification of tendon in rats by targeting Rheb for degradation via the ubiquitin-proteasome pathway. J Cell Mol Med 2024, 28. e18349 Full text |
| 16 | C. Vater, C. Bräuer, S. Grom, T. Fecht, T. Ahlfeld, M. v. Witzleben, A.-M. Placht, K. Schütz, J. M. Schehl, T. Wolfram, F. Reinauer, M. Scharffenberg, J. Wittenstein, A. Hoess, S. Heinemann, M. Gelinsky, G. Lauer, A. Lode: Poly(DL-lactide) polymer blended with mineral phases for extrusion 3D printing – studies on degradation and biocompatibility. Polymers 2024 , 16, 1254 (27 pages) Full text |
| 15 | M. Cvjeticanin, B. Ramic, M. Milanovic, Dj. Veljovic, A. Andjelkovic, S. Maletic, I. Jevrosimov, B. Bajkin, V. Guduric: Cell viability assessment and ion release profiles of GICs modified with TiO2- and Mg-doped hydroxyapatite nanoparticles. Journal of Dentistry 2024, 145, 105015 Full text |
| 14 | S. Dani, K. Schütz, E. Dikici, A. Bernhardt, A. Lode: Blinded by the lights: The effect of continuous long-term illumination with visible light in different spectral ranges on mammalian cells. Scientific Reports 2024, 14, 9444 Full text |
| 13 | X. Yu, H. Ma, Y. Wang, J. Hao, L. Chen, M. Gelinsky, C. Wu: Assembled/Disassembled Modular Scaffolds for Multicellular Tissue Engineering. Adv Mat 2024, 36, 2308126 (13 pages) Full text |
| 12 | V. Markeviciute, M.j Puthia, L. Arvidsson, Y. Liu, E. Törnquist, A. Tengattini, J. Huang, Y. Bai, C. Vater, R. Petrolis, S. Zwingenberger, A. Krisciukaitis, A. Smailys, S. Lukosevicius, M. Stravinskas, H. Isaksson, S. Tarasevicius, L. Lidgren, M. Tägil, D. B. Raina: Systemically administered zoledronic acid activates locally implanted synthetic hydroxyapatite particles enhancing peri-implant bone formation: A regenerative medicine approach to improve fracture fixation. Acta Biomater 2024, 179, 354 - 370 Full text |
| 11 | M. Kuznetsov, O. Tananaiko, M. Gelinsky, M. von Witzleben, D. Kilian, A. Lunyo, V. Saska, K. Dzhigirei, V.V. Lisnyak, L.M. Grischenko, S.V. Kondratenko, L. Rieznichenko, T. Gruzina, S. Dybkova: Carbon Screen-printed Electrodes Modified with SiO2-CuO-Glucose Oxidase Film for Toxicity Assessment using bacteria as Indicator System. Electroanalysis 2024, 36, e202300404 (16 pages) Full text |
| 10 | X. Tian, C. Vater, D. B. Raina, L. Findeisen, L.-M. Matuszewski, M. Tägil, L. Lidgren, A. Winkler, R. Gottwald, N. Modler, K.-D. Schaser, A. C. Disch, S. Zwingenberger: Co-delivery of rhBMP-2 and zoledronic acid using calcium sulfate/hydroxyapatite carrier as a bioactive bone substitute to enhance and accelerate spinal fusion. Bioactive Materials 2024, 36, 256 - 271 Full text |
| 9 | T. Davis, K. Tabury, S. Zhu, D. Angeloni, S. Baatout, A. Benchoua, J. Bereiter-Hahn, D. Bottai, J.-I. Buchheim, M. Calvaruso, E. Camero-Diaz, S. Castiglioni, D. Cavalieri, G. Ceccarelli, A. Chouker, F. Cialdai, G. Ciofani, G. Coppola, G. Cusella, A. Degl’Innocenti, J.-F. Desaphy, J.-P. Frippiat, M. Gelinsky, G. Genchi, M. Grano, D. Grimm, A. Guignandon, C. Hahn, J. Hatton, R. Herranz, C. F. Hellweg, C. Saverio Iorio, T. Karapantsios, J.J.W.A. van Loon, M. Lulli, J. Maier, J. Malda, E. Mamaca, L. Morbidelli, A. van Ombergen, A. Osterman, A. Ovsianikov, F. Pampaloni, E. Pavezlorie, V. Pereda-Campos, C. Przybyla, C. Puhl, P. Rettberg, A. M. Rizzo, K. Robson-Brown, L. Rossi, G. Russo, A. Salvetti, D. Santucci, M. Sperl, S. Tavella, C. Thielemann, R. Willaerrt, N. Szewczyk, M. Monici: How are cell and tissue structure and function influenced by gravity and what are the gravity perception mechanisms? npj Microgravity 2024, 10, 16 (7 Seiten) Full text |
| 8 | K. Wirsig, J. Bacova, R. F. Richter, V. Hintze, A. Bernhardt: Cellular response of advanced triple cultures of human osteocytes, osteoblasts and osteoclasts to high sulfated hyaluronan (sHA3). Materials Today Bio 2024 , 25, 101006 (16 pages) Full text |
| 7 | A. Kara Özenler, Th. Distler, A. R. Akkineni, F. Tihminlioglu, M. Gelinsky, A. R. Boccaccini: 3D bioprinting of mouse pre-osteoblasts and human MSCs using bioinks consisting of gelatin and decellularized bone particles. Biofabrication 2024, 16, 025027 (18 pages) Full text |
| 6 | F. B. Albrecht, T. Ahlfeld, A. Klatt, S. Heine, M. Gelinsky, P. J. Kluger: Biofabrication's Contribution to the Evolution of Cultured Meat. Adv Healthcare Mater 2024, 13, 2304058 (21 pages) Full text |
| 5 | X. Tian, D. B. Raina, J.-T. Oberläender, Y. Liu, J. Goronzy, R. Apolle, C. Vater, R. F. Richter, M. Tägil, L. Lidgren, A. Thomas, U. Platz, K.-D. Schaser, A. C. Disch, S. Zwingenberger: Comparison of immediate anchoring effectiveness of two different techniques of bioresorbable ceramic application for pedicle srew augmentation. Ceramics Inter 2024, 50, 12877 - 12889 Full text |
| 4 | S. Heine, T. Ahlfeld, F. B. Albrecht, M. Gelinsky, P. J. Kluger: How biofabrication can accelerate cultured meat’s path to market. Nat Rev Mater 2024, 9, 83 - 85 Full text |
| 3 | N. Warth, M. Berg, L. Schumacher, M. Boehme, J. Windisch, M. Gelinsky: Bioprint FirstAid: A handheld bioprinter for first aid utilization on space exploration missions. Acta Astronaut 2024, 215, 194 - 204 Full text |
| 2 | M. v. Witzleben, J. Hahn, R. F. Richter, B. de Freitas, E. Steyer, K. Schütz, C. Vater, A. Bernhardt, C. Elschner, M. Gelinsky: Tailoring the pore design of embroidered structures by melt electrowriting to enhance the cell alignment in scaffold-based tendon reconstruction. Biomater Adv 2024, 156, 213708 (14 pages) Full text |
| 1 |
D. G. Garces, S. Strauß, S. Gretzinger, B. Schmieg, T. Juengst, J. Groll, L. Meinel, I. Schmidt, H. Hartmann, K. Schenke-Layland, N. Brandt, M. Selzer, S. Zimmermann, P. Koltay, A. Southan, G. E. M. Tovar, S. Schmidt, A. Weber, T. Ahlfeld, M. Gelinsky, T. Scheibel, R. Detsch, A. R. Boccaccini, T. Naolou, C. Lee-Thedieck, C. Willems, T. Groth, S. Allgeier, B. Köhler, T. Friedrich, H. Briesen, J. Buchholz, D. Paulus, A. v. Gladiss, J. Hubbuch: On the reproducibility of extrusion-based bioprinting: round robin study on standardization in the field. |
2023
| 25 | F. Cialdai, A. M. Brown, C. W. Baumann, D. Angeloni, S. Baatout, A. Benchoua, J. Bereiter-Hahn, D. Bottai, J.-I. Buchheim, M. Calvaruso, E. Carnero-Diaz, S. Castiglioni, D. Cavalieri, G. Ceccarelli, A. Choukér, G. Ciofani, G. Coppola, G. Cusella, A. Degl’Innocenti, J.-F.s Desaphy, J.-P. Frippiat, M. Gelinsky, G. Genchi, M. Grano, D. Grimm, A. Guignandon, C. Hahn, J. Hatton, R. Herranz, C. E. Hellweg, C. Saverio Iorio, T. Karapantsios, J. v. Loon, M. Lulli, J. Maier, J. Malda, E. Mamaca, L. Morbidelli, A. v. Ombergen, A. Osterman, A. Ovsianikov, F. Pampaloni, E. Pavezlorie, V. Pereda-Campos, C. Przybyla, C. Puhl, P. Rettberg, C. Risaliti, A. M. Rizzo, K. Robson-Brown, L. Rossi, G. Russo, A. Salvetti, D. Santucci, M. Sperl, F. Strollo, K. Tabury, S. Tavella, C. Thielemann, R. Willaert, N. J. Szewczyk, M. Monici: How do gravity alterations affect animal and human systems at a cellular/tissue level? npj Microgravity 2023, 9, 84 (9 pages) Full text |
| 24 | S. Ray, U. Thormann, I, Kramer, U. Sommer, M. Budak, M. Schumacher, A. Bernhardt, A. Lode, C. Kern, M. Rohnke, C. Heiss, K. S. Lips, M. gelinsky, V. Alt: Mesoporous Bioactive Glass-Incorporated Injectable Strontium-Containing Calcium Phosphate Cement Enhanced Osteoconductivity in a Critical-Sized Metaphyseal Defect in Osteoporotic Rats. Bioengineering 2023, 10, 1203 (24 pages) Full text |
| 23 | M. v. Witzleben, T. Stoppe, A. Zeinalova, Z. Chen, T. Ahlfeld, M. Bornitz, A. Bernhardt, M. Neudert, M. Gelinsky: Multimodal additive manufacturing of biomimetic tympanic membrane replacements with near tissue-like acousto-mechanical and biological properties. Acta Biomater 2023, 170, 124 - 141 Full text |
| 22 | S. A. Alawi, J. Matschke, D. Muallah, M. Gelinsky, A. Dragu: 3D bioprinting in plastic and reconstructive surgery: current concepts, progress, and clinical application. Eur J Plast Surg 2023 , 46, 833 - 843 Full text |
| 21 | D. N. Carvalho, S. Dani, C. G. Sotelo, R. I. Perez-Martin, R. L. Reis, T. H. Silva, M. Gelinsky: Assessing non-synthetic crosslinkers in biomaterial inks based on polymers of marine origin to increase the shape fidelity in 3D extrusion printing. Biomed Mater 2023 , 18, 055017 (17 pages) Full text |
| 20 | A. Schlüßler, M. Fehrenbacher, R. F. Richter, E. Tille, A. Biewener, J. Nowotny: Biomechanical and clinical evaluation of minimal invasive plate osteosynthesis for two-part clavicle shaft fractures. BMC Muscu Dis 2023, 24, 612 (12 pages) Full text |
| 19 | S. Liu, L. Cheng, Y. Liu, H. Zhang, Y. Song, J.-H. Park, K. Dashnyam, J.-H. Lee, F. Al-Hakim Khalak, O. Riester, Z. Shi, S. Ostrovidov, H. Kaji, H.-P. Deigner, J. L. Pderaz, J. C. Knowles, Q. Hu, H.-W. Kim, M. Ramalingam: 3D Bioprinting tissue analogs: Current development and translational implications. J Tiss Eng 2023, 14 (20 pages) Full text |
| 18 | T. Ahlfeld, A. Lode, A.-M. Placht, T. Fecht, T. Wolfram, S. Grom, A. Hoess, C. Vater, Ch. Bräuer, S. Heinemann, G. Lauer, F. Reinauer, M. Gelinsky: A comparative analysis of 3D printed scaffolds consisting of poly(lactic-co-glycolic) acid and different bioactive mineral fillers: aspects of degradation and cytocompatibility. Biomater Sci 2023, 11, 5590 - 5604 Full text |
| 17 | A. v. Ombergen, F. Chalupa-Gantner, P. Chansoria, B. M. Colosimo, M. Costantini, M. Domingos, A. Dufour, C. De Maria, J. Groll, T, Jungst, R. Levato, J. Malda, A. Margarita, C. Maequette, A. Ovsianikov, E. Petiot, S. Read, L. Surdo, W. Swieszkowski, G. Vozzi, J. Windisch, M. Zenobi-Wong, M. Gelinsky:
3D Bioprinting in Microgravity: Opportunities, Challenges, and Possible Applications in Space. |
| 16 | R.F. Richter, C. Vater, M. Korn, T. Ahlfeld, M. Rauner, W. Pradel, B. Stadlinger, M. Gelinsky, A. Lode, P. Korn: Treatment of critical bone defects using calcium phosphate cement and mesoporous bioactive glass providing spatiotemporal drug delivery. Bioact Mater 2023, 28, 402 - 419 Full text |
| 15 | C. Heinemann, F. Buchner, P. S. Lee, A. Bernhardt, B. Kruppke, H.-P. Wiesmann, V. Hintze: Effects of Gamma Irradiation and Supercritical Carbon Dioxide Sterilization on Methacrylated Gelatin/Hyaluronan Hydrogels. J. Funct. Biomater 2023, 14, 317 (16 pages) Full text |
| 14 | S. Liu, A. Bernhardt, K. Wirsig, A. Lode, Q. Hu, M. Gelinsky, D. Kilian:
Synergy of inorganic and organic inks in bioprinted tissue substitutes: Construct stability and cell response during long-term cultivation in vitro.Composites B Eng 2023, 261, 110804 (23 pages) Full text |
| 13 | D. Muallah, J. Matschke, M. Kappler, L. M. Kroschwald, G. Lauer, A. W. Eckert: Dental Pulp Stem Cells for Salivary Gland Regeneration—Where Are We Today? Int J Mol Sci 2023, 24, 8664 (14 pages) Full text |
| 12 | J. Windisch, O. Reinhardt, S. Duin, K. Schütz, N. J. Novoa Rodriguez, S. Liu, A. Lode, M. Gelinsky: Bioinks for space missions: the influence of long-term storage of alginate-methylcellulose based bioinks on printability as well as cell viability and function. Adv Health Mater 2023, 12, 2300436 (19 pages) Full text |
| 11 | D. N. Carvalho, M. Gelinsky, D. S. Williams, A. Mearns-Spragg, R. L. Reis, T. H. Silva: Marine collagen-chitosan-fucoidan/chondroitin sulfate cryo-biomaterials loaded with primary human cells envisaging cartilage tissue engineering. Int J Biol Macromol 2023, 241, 124510 (18 pages) Full text |
| 10 | Y. Liu, M. Puthia, E. J. Sheehy, I. Ambite, J. Petrlova, S. Prithviraj, M. W. Oxborg, S. Sebastian, C. Vater, S. Zwingenberger, A. Struglics, P. E. Bourgine, F. J. O'Brien, D. B. Raina: Sustained delivery of a heterodimer bone morphogenetic protein-2/7 via a collagen hydroxyapatite scaffold accelerates and improves critical femoral defect healing. Acta Biomater 2023, 162, 164 -181 Full text |
| 9 | D. N. Carvalho, F. C. M. Lobo, L. C. Rodrigues, E. M. Fernandes, D. S. Williams, A. Mearns-Spragg, C. G. Sotelo, R. I. Perez-Martín, R. L. Reis, M. Gelinsky, T. H. Silva: Advanced Polymeric Membranes as Biomaterials Based on Marine Sources Envisaging the Regeneration of Human Tissues. Gels 2023, 9, 247 (26 pages) Full text |
| 8 | O. Reinhardt, S. Ihmann, M. Ahlhelm, M. Gelinsky: 3D bioprinting of mineralizing cyanobacteria as novel approach for the fabrication of Living Building Materials. Front Bioeng Biotechnol 2023, 11, 1145177 (14 pages) Full text |
| 7 | O. Lužanin, V. Guduric, A. Bernhardt, D. Movrin, L. Damjanovic-Vasilic, P. Terek, G. Ostojic, S. Stankovski: Impact of In-Process Crystallinity of Biodegradable Scaffolds Fabricated by Material Extrusion on the Micro- and Nanosurface Topography, Viability, Proliferation, and Differentiation of Human Mesenchymal Stromal Cells. Polymers 2023, 15, 1468 (21 pages) Full text |
| 6 | S. Liu, D. Kilian, T. Ahlfeld, Q. Hu, M. Gelinsky: Egg white improves the biological properties of an alginate-methylcellulose bioink for 3D bioprinting of volumetric bone constructs. Biofabrication 2023, 15, 025013 (28 pages) Full text |
| 5 | D. Kilian, A. Poddar, V. Desrochers, C. Heinemann, N. Halfter, S. Liu, S. Rother, M. Gelinsky, V. Hintze, A. Lode: Cellular adhesion and chondrogenic differentiation inside an alginate-based bioink in response to tailorable artificial matrices and tannic acid treatment. Biomater Adv 2023, 147, 213319 (17 pages) Full text |
| 4 |
D. Kilian, S. Holtzhausen, W. Groh, P. Sembdner, C. Czichy, A. Lode, R. Stelzer, M. Gelinsky: 3D extrusion printing of density gradients by variation of sinusoidal printing paths for tissue engineering and beyond. |
| 3 | C. Vater, M. Hetz, M. Quade, A. Lode, M. Gelinsky, S. Rammelt, S. Zwingenberger, H. Bretschneider: Combined Application of BMP-2 and Naturally Occurring Bioactive Factor Mixtures for the Optimized Therapy of Segmental Bone Defects. Acta Biomater 2023, 157, 162 - 174 Full text |
| 2 | R. F. Richter, T. Ahlfeld, M. Gelinsky, A. Lode: Composites consisting of calcium phosphate cements and mesoporous bioactive glasses as a 3D plottable drug delivery system. Acta Biomat 2023, 156, 146 - 157 Full text |
| 1 | S. Liu, H. Zhang, T. Ahlfeld, D. Kilian, Y. Liu, M. Gelinsky, Q Hu: Evaluation of different crosslinking methods alter the properties of extrusion-printed chitosan-based multi-material hydrogel composites. Bio-Des Manuf 2023, 6, 150 - 173 Full text |
2022
| 20 | X. Tian, D. B. Raina, C. Vater, D. Kilian, T. Ahlfeld, I. Platzek, U. Nimtschke, M. Tägil, L. Lidgren, A. Thomas, U. Platz, K.-D. Schaser, A. C. Disch, S. Zwingenberger: Evaluation of an Injectable Biphasic Calcium Sulfate/Hydroxyapatite Cement for the Augmentation of Fenestrated Pedicle Screws in Osteoporotic Vertebrae: A Biomechanical Cadaver Study. J Funct Biomater 2022, 13, 269 (15 pages) Full text |
| 19 | Effectiveness of Dental Pulp-derived Stem Cells and Bone Marrow-derived Mesenchymal Stromal Cells Implanted into a Murine Critical Bone Defect. Curr Stem Cell Res Ther 2022, 17, 480 - 491 Full text |
| 18 | B. Zeller-Plumhoff, A. R. Akkineni, H. Helmholz, D. Orlov, M. Mosshammer, M. Kühl, R. Willumeit-Römer, M. Gelinsky: Oxygen-sensitive nanoparticles reveal the spatiotemporal dynamics of oxygen reduction during magnesium implant biodegradation dependent on alloy and immersion medium. NPJ Mater Degradation 2022 , 6, 95, (8 pages) Full text |
| 17 | D. Kilian, W. Kilian, A. Troia, T.-D. Nguyen, B. Ittermann, L. Zilberti, M. Gelinsky: 3D Extrusion Printing of Biphasic Anthropomorphic Brain Phantoms Mimicking MR Relaxation Times Based on Alginate-Agarose-Carrageenan Blends. ACS Appl Mater Interface 2022, 14, 48397–48415 Full text |
| 16 | R. Taymour, N. A. Chicaiza-Cabezas, M. Gelinsky, A. Lode: Core-shell bioprinting of vascularized in vitro liver sinusoid models. Biofabrication 2022, 14, 045019 (22 pages) Full text |
| 15 | S. Dani, J. Windisch, X. M. V. Guerrero, A. Bernhardt, M. Gelinsky, F. Krujatz, A. Lode: Selection of a suitable photosynthetically active microalgae strain for the co-cultivation with mammalian cells. Front Bioengin Biotechnol 2022, 10, 994134 (16 pages) Full text |
| 14 | K. Wirsig, D. Kilian, M. v. Witzleben, M. Gelinsky, A. Bernhardt: Impact of Sr2+ and hypoxia on 3D triple cultures of primary human osteoblasts, osteocytes and osteoclasts. Eur J Cell Biol 2022 101, 151256 (14 pages) Full text |
| 13 | P. S. Lee, C. Heinemann, K. Zheng, R. Appali, F. Alt, J. Krieghoff, A. Bernhardt, A. R. Boccaccini, U. v. Rienen, V. Hintze: The interplay of collagen/bioactive glass nanoparticle coatings and electrical stimulation regimes distinctly enhanced osteogenic differentiation of human mesenchymal stem cells.
Acta Biomater 2022, 149, 373 - 386 Full text |
| 12 | S. Duin, S. Bhandarkar, S. Lehmann, E. Kemter, E. Wolf, M. Gelinsky, B. Ludwig, A. Lode: Viability and functionality of neonatal porcine islet-like cell clusters bioprinted in alginate-based bioinks. Biomed 2022, 10, 1420 (22 pages) Full text |
| 13 | D. Kilian, M. v. Witzleben, M. Lanaro, C. S. Wong, C. Vater, A. Lode, M. C. Allenby, M. A. Woodruff, M. Gelinsky: 3D plotting of calcium phosphate cement and melt electrowriting of polycaprolactone microfibers in one scaffold: a hybrid additive manufacturing process. J Funct Biomater 2022, 13, 75 (24 pages) Full text |
| 10 | Ch. Czichy, D. Kilian, T.-Ch. Wang, S. Günther, A. Lode, M. Gelinsky, S. Odenbach: CyMAD bioreactor: a cyclic magnetic actuation device for magnetically mediated mechanical stimulation of 3D bioprinted hydrogel scaffolds. J Mech Behav Biomed Mater 2022, 131, 105253 (13 pages) Full text |
| 9 | A. Bernhardt, H. Helmholz, D. Kilian, R. Willumeit-Römer, M. Gelinsky:
Impact of degradable magnesium implants on osteocytes in single and triple cultures. |
| 8 | A. C. Culla, C. Vater, X. Tian, J. Bolte, T. Ahlfeld, H. Bretschneider, A. Pape, S. B. Goodman, M. Gelinsky, S. Zwingenberger: Treatment of Critical Size Femoral Bone Defects with Biomimetic Hybrid Scaffolds of 3D Plotted Calcium Phosphate Cement and Mineralized Collagen Matrix. Int J Mol Sci 2022 23, 3400 (16 pages) Full text |
| 7 | A. R. Akkineni, B. S. Elci, A. Lode, M. Gelinsky: Addition of high acyl gellan gum to low acyl gellan gum enables the blends 3D bioprintable. Gels 2022, 8, 199 (15 pages) Full text |
| 6 | F. Krujatz, S. Dani, J. Windisch, J. Emmermacher, F. Hahn, M. Mosshammer, S. Murthy, J. Steingroewer, M. Kühl, Th. Walther, M. Gelinsky, A. Lode: Think outside the box: 3D bioprinting concepts for biotechnological applications – recent developments and future perspectives. Biotechnol Adv 2022 , 58, 107930 Full text |
| 5 | S. Duin, A. Lode, B. Ludwig, M. Gelinsky: 3D Bioprinting of Islets. In: A. Abderrahmani, S. Szunerits, R. Boukerroub, A. El Ouaamari (eds.): Nanotechnology for Diabetes Management. Royal Society of Chemistry (UK), London 2022, 233 - 261 |
| 4 | V. Guduric, J. Wieckhusen, A. Bernhardt, T. Ahlfeld, A. Lode, C. Wu, M. Gelinsky: Composite bioinks with mesoporous bioactive glasses - a critical evaluation of results obtained by in vitro experiments. Front Bioengin Biotechnol 2022, 9, 767256 (13 pages) Full text |
| 3 | P. Korn, M. Gelinsky: Model Systems for Investigation of Cell-to-Cell Communication. In: R. Gruber, H. Terheyden, B. Stadliner (eds.): Visual Biology in Dental Medicine. Quintessence, Berlin 2022, 197 - 206 |
| 2 | B. Paul, A. Lode, A.-M. Placht, A. Voß, A. Gebert, M. Gelinsky, J. Hufenbach: Cell−Material Interactions in Direct Contact Culture of Endothelial Cells on Biodegradable Iron-Based Stents Fabricated by Laser Powder Bed Fusion and Impact of Ion Release. ACS Appl Mater Interface 2022, 14, 439 - 451 Full text |
| 1 | D. Kilian, S. Cometta, A. Bernhardt, R. Taymour, J. Golde, T. Ahlfeld, J. Emmermacher, M. Gelinsky, A. Lode: Core-shell bioprinting as a strategy to apply differentiation factors in a spatially defined manner inside osteochondral tissue substitutes. Biofabrication 2022, 14, 014108 (24 pages) Full text |
2021
| 26 | A. R. Akkineni, J. Spangenberg, M. Geissler, S. Reichelt, H. Buechner, A. Lode, M. Gelinsky: Controlled and Local Delivery of Antibiotics by 3D Core/Shell Printed Hydrogel Scaffolds to Treat Soft Tissue Infections. Pharmaceutics 2021, 13, 2151 (21 pages) Full text |
| 25 | S. Dani, T. Ahlfeld, F. Albrecht, S. Duin, P. Kluger, A. Lode, M. Gelinsky: Homogeneous and Reproducible Mixing of Highly Viscous Biomaterial Inks and Cell Suspensions to Create Bioinks. Gels 2021, 7, 227 (17 pages) Full text |
| 24 | L. Kroschwald, F. Allerdt, A. Bernhardt, S. Rother, K. Zheng, I. Maqsood, N. Halfter, C. Heinemann, S. Möller, M. Schnabelrauch, M. Hacker, S. Rammelt, A. Boccaccini, V. Hintze: Artificial Extracellular Matrices Containing Bioactive Glass Nanoparticles Promote Osteogenic Differentiation in Human Mesenchymal Stem Cells. Int J Mol Sci 2021, 22, 12819 (17 pages) Full text |
| 23 | C. Vater, E. Mehnert, H. Bretschneider, J. Bolte, L. Findeisen, L.-M. Matuszewski, S. Zwingenberger: Dose Dependent Effects of a Novel Selective EP4 Prostaglandin Receptor Agonist on Treatment of Critical Size Femoral Bone Defects in a Rat Model. Biomed 2021, 9, 1712 (13 pages) Full text |
| 22 | N. Cubo-Mateo, M. Gelinsky: Wound and Skin Healing in Space: The 3D Bioprinting Perspective. Front Bioeng Biotechnol 2021, 9, 720217 (7 pages) Full text |
| 21 | L. Li, Z. Ling, C. Vater, X. Chen, S. Huang, Q. Qi, Z. Zhou, X. Li, Z. Zou, M. Gelinsky, J. Lou, X. Zoou, M. Stiehler: GDF-5 variant loading on composite scaffolds promotes spinal fusion through coupling of osteogenesis and angiogenesis: a preclinical study in rhesus monkeys. SmartMaterMed 2021, 2, 322 - 333 Full text |
| 20 | S. Schulze, R. Rothe, C. Neuber, S. Hauser, M. Ullrich, J. Pietzsch, S. Rammelt: Men who stare at bone: multimodal monitoring of bone healing. Biological Chemistry 2021, 402, 1397 - 1413 Full text |
| 19 | B. Zwingenberger, C. Vater, R. L. Bell, J. Bolte, E. Mehnert, R. Brünler, D. Aibibu, S. Zwingenberger: Treatment of critical size femoral bone defects with chitosan scaffolds produced by a novel process from textile engineering. Biomed 2021, 9, 1015 (14 pages) Full text |
| 18 | E. Gossla, A. Bernhardt, R. Tonndorf, D. Aibibu, Ch. Cherif, M. Gelinsky: Anisotropic chitosan scaffolds generated by electrostatic flocking combined with alginate hydrogel support chondrogenic differentiation. Int J Mol Sci 2021, 22, 9341 Full text |
| 17 | A. Bernhardt, J. Skottke, M. v. Witzleben, M. Gelinsky: Triple culture of primary human osteoblasts, osteoclasts and osteocytes as an in vitro bone model. Int J Mol Sci 2021, 22, 7316 Full text |
| 16 | M. T. Ross, D. Kilian, A. Lode, J. Ren, M. C. Allenby, M. Gelinsky, M. A. Woodruff: Using melt-electrowritten microfibres for tailoring scaffold mechanics of 3D bioprinted chondrocyte-laden constructs. Bioprinting 2021 , 23, e00158 Full text |
| 15 | Ph. Sembdner, D. Kilian, D. Hofmann, St. Holtzhausen, T. Ahlfeld, A. Lode, R. Stelzer, M. Gelinsky: Bildgebungsbasiertes individuelles Design und additive Fertigung von osteochondralen Knochenersatzstrukturen. In: R. Lachmayer, K. Rettschlag, S. Kaierle (eds.): Konstruktion für die Additive Fertigung 2020. Springer Vieweg 2021, 19 - 35 Full text |
| 14 | H. Bretschneider, M. Quade, A. Lode, M. Gelinsky, S. Rammelt, C. Vater: Chemotactic and Angiogenic Potential of Mineralized Collagen Scaffolds Functionalized with Naturally Occurring Bioactive Factor Mixtures to Stimulate Bone Regeneration. Int J Mol Sci 2021 , 22, 5836 Full text |
| 13 | L. Findeisen, J. Bolte, C. Vater, C. Petzold, M. Quade, L. Müller, S. B. Goodman, S. Zwingenberger: Cell spheroids are as effective as single cells suspensions in the treatment of critical-sized bone defects. BMC Musculoskeletal Disorders 2021, 22, 401 (11 pages) Full text |
| 12 | D. Kilian, Ph. Sembdner, H. Bretschneider, T. Ahlfeld, L. Mika, J. Lützner, St. Holtzhausen, A. Lode, R. Stelzer, M. Gelinsky: 3D printing of patient-specific implants for osteochondral defects – workflow for an MRI-guided zonal design. Bio-Des Manuf 2021, 4, 818 - 832 Full text |
| 11 | V. Guduric, N. Belton, R. F. Richter, A. Bernhardt, J. Spangenberg, C. Wu, A. Lode, M. Gelinsky: Tailorable zinc-substituted mesoporous bioactive glass/alginate-methylcellulose composite bioinks. Materials 2021, 14, 1225 (21 pages) Full text |
| 10 | A. Bernhardt, J. Bacova, U. Gbureck, M. Gelinsky: Influence of Cu2+ on osteoclast formation and activity in vitro. Int J Mol Sci 2021, 22, 2451 (14 pages) Full text |
| 9 |
S. Sangkert, S. Kamolmatyakul, M. Gelinsky, J. Meesane: 3D printed scaffolds of alginate/polyvinylalcohol with silk fibroin based on mimicked extracellular matrix for bone tissue engineering in maxillofacial surgery. |
| 8 | R. Taymour, D. Kilian, T. Ahlfeld, M. Gelinsky, A. Lode: 3D bioprinting of hepatocytes – core-shell structured co-cultures with fibroblasts for enhanced functionality. Sci Rep 2021, 11, 5130 (18 pages) Full text |
| 7 | M. Gelinsky, T. Ahlfeld: Additive Manufacturing of Polymers and Ceramics for Tissue Engineering Applications. In: A. Boccaccini, L. Liverani (eds.): Tissue Engineering Using Ceramics and Polymers (3rd edition). Elsevier, Amsterdam 2021, 388 - 406 Full text |
| 6 | T. Ahlfeld, A. Lode, R. F. Richter, W. Pradel, A. Franke, M. Rauner, B. Stadlinger, G. Lauer, M. Gelinsky, P. Korn: Toward biofabrication of resorbable implants consisting of a calcium phosphate cement and fibrin – a characterization in vitro and in vivo. Int J Mol Sci 2021, 22, 1218 Full text |
| 5 | J. Spangenberg, D. Kilian. C. Czichy, T. Ahlfeld, A. Lode, S. Günther, S. Odenbach, M. Gelinsky: Bioprinting of Magnetically Deformable Scaffolds. ACS Biomater Sci Eng 2021, 7, 648 - 662 Full text |
| 4 | M. von Witzleben, T. Stoppe, T. Ahlfeld, A. Bernhardt, M.-L. Polk, M. Bornitz, M. Neudert, M. Gelinsky: Biomimetic tympanic membrane replacement made by melt electrowriting. Adv Healthcare Mater 2021, 10, 2002089 (18 pages) Full text |
| 3 | J. Li, X. Jiang, H. Li, M. Gelinsky, Zh. Gu: Tailoring Materials for Modulation of Macrophage Fates. Adv Mater 2020, 33, e2004172 (38 pages) Full text |
| 2 | P. Marx-Stoelting, M. Solano, H. Aoyama, R. Adams, A. Bal-Price, J. Buschmann, I. Chahoud, R. Clark, T. Fang, M. Fujiwara, M. Gelinsky, K. Grote, M. Horimoto, S. Bennekou, R. Kellner, M. Kuwagata, M. Leist, A. Lang, W. Li, A. Mantovani, S. Makris, F. Paumgartten, M. Perron, M. Sachana, A. Schmitt, S. Schneider, G. Schönfelder, F. Schulze, K. Shiota, R. Solecki: 25th anniversary of the Berlin workshop on developmental toxicology: DevTox database update, challenges in risk assessment of developmental neurotoxicity and alternative methodologies in bone development and growth.
Reproductive Toxicology 2021, 100, 155 - 162 Full text |
| 1 |
A. Bernhardt, J. Schneider, A. Schroeder, K. Papadopoulous, E. Lopez, F. Brückner, U. Botzenhart: Surface conditioning of additively manufactured titanium implants and its influence on materials properties and in vitro biocompatibility. |
2020
| 30 | D. Raina, L.-M. Matuszewski, C. Vater, J. Bolte, H. Isaksson, L. Lidgren, M. Tägli, S. Zwingenberger: A facile one-stage treatment of critical bone defects using a calcium sulfate/hydroxyapatite biomaterial providing spatiotemporal delivery of bone morphogenic protein–2 and zoledronic acid. Sci Adv 2020, 6, eabc1779 ( 12 pages) Full text |
| 29 | X. Wang, J. Xue, B. Ma, J. Wu, J. Chang, M. Gelinsky, Ch. Wu: Black Bioceramics: Combining Regeneration with Therapy. Adv Mater 2020, 32, 2005140 (9 pages) Full text |
| 28 | N. Cubo Mateo, S. Podhajsky, D. Knickmann, K. Slenzka, T. Ghidini, M. Gelinsky: Can 3D bioprinting be a key for exploratory missions and human settlements on the Moon and Mars? Biofabrication 2020, 12, 043001 (8 pages) Full text |
| 27 | D. Vehlow, J. P. H. Wong, B. Urban, J. Weißpflog, A. Gebert, M. Schumacher, M. Gelinsky, M. Stamm, M. Müller: Catechol containing polyelectrolyte complex nanoparticles as local drug delivery system for Bortezomib at bone substitute materials. Pharmaceutics 2020, 17, 799 (23 pages) Full text |
| 26 | X. Wang, M. Zhang, J. Ma, M. Xu, J. Chang, M. Gelinsky, Ch. Wu: 3D Printing of Cell-Container-like Scaffolds for Multicell Tissue Engineering. Engineering 2020, 6, 1276 - 1284 Full text |
| 25 | Y. Förster, S. Schulze, A. Penk, C. Neuber, S. Möller, V. Hintze, D. Scharnweber, M. Schnabelrauch, J. Pietzsch, D. Huster, S. Rammelt: The influence of different artificial extracellular matrix implant coatings on the regeneration of a critical size femur defect in rats. Mater Sci Eng C 2020,116, 111157 (13 pages) Full text |
| 24 | R. Rothe, S. Hauser, C. Neuber, M. Laube, S. Schulze, S. Rammelt, J. Pietzsch: Adjuvant Drug-Assisted Bone Healing: Advances and Challenges in Drug Delivery Approaches. Pharmaceutics 2020, 12, 428 (39 pages) Full text |
| 23 |
G. Hattab, T. Ahlfeld, A. Klimova, A. Koepp, M. Schuerer, S. Speidel: Uniaxial compression testing and Cauchy stress modeling to design anatomical silicone replicas. |
| 22 | H. Ehrlich, R. Martinović, D. Joksimović, I. Petrenko, S. Schiaparelli, M. Wysokowski, D. Tsurkan, A. L. Stelling, A. Springer, M. Gelinsky, A. Joksimović: Conchixes: organic scaffolds which resemble the size and shapes of mollusks shells, their isolation and potential multifunctional applications. Appl Phys A 2020, 126, 562 (13 pages) Full text |
| 21 | C. Kern, S. Ray, M. Gelinsky, A. T. Bellew, A. Pirkl, M. Rohnke: New insights into ToF-SIMS imaging in osteoporotic bone research. Biointerphases 2020, 15, 031005 (22 pages) Full text |
| 20 | K. Nowacki, I. Stępniak, T. Machałowski, M. Wysokowski, I. Petrenko, C. Schimpf, D. Rafaja, E. Langer, A. Richter, J. Ziętek, S. Pantović, A. Voronkina, V. Kovalchuk, V. Ivanenko, Y. Khrunyk, R. Galli, Y. Joseph, M. Gelinsky, T. Jesionowski, H. Ehrlich: Electrochemical method for isolation of chitinous 3D scaffolds from cultivated Aplysina aerophoba marine demosponge and its biomimetic application. Appl Phys A 2020, 126, 368 (16 pages) Full text |
| 19 | D. Kilian, T. Ahlfeld, A. R. Akkineni, A. Bernhardt, M. Gelinsky, A. Lode: 3D Bioprinting of osteochondral tissue substitutes – in vitro-chondrogenesis in multi-layered mineralized constructs. Sci Rep 2020, 10, 8277 (17 pages) Full text |
| 18 | A. Gabrielyan, M. Quade, M. Gelinsky, A. Rösen-Wolff: IL-11 and soluble VCAM-1 are important components of hypoxia conditioned media and crucial for mesenchymal stromal cells attraction. Stem Cell Res 2020, 45, 101814 (11 pages) Full text |
| 17 | G. Cidonio, M. Glinka, Y.-H. Kim, J. Kanczler, S. Lanham, T. Ahlfeld, A. Lode, J. Dawson, M. Gelinsky, R. Oreffo: Nanoclay-based 3D printed scaffolds promote vascular ingrowth ex vivo and generate bone mineral tissue in vitro and in vivo. Biofabrication 2020, 12, 035010 (15 pages) Full text |
| 16 | T. Ahlfeld, V. Guduric, S. Duin, A. R. Akkineni, K. Schütz, D. Kilian, J. Emmermacher, N. Cubo-Mateo, S. Dani, M. v. Witzleben, J. Spangenberg, R. Abdelgaber, R. F. Richter, A. Lode, M. Gelinsky: Methylcellulose – a versatile printing material that enables biofabrication of tissue equivalents with high shape fidelity. Biomater Sci 2020, 8, 2102 - 2110 Full text |
| 15 | T. Ahlfeld, N. Cubo-Mateo, S. Cometta, V. Guduric, C. Vater, A. Bernhardt, A. R. Akkineni, A. Lode, M. Gelinsky: A Novel Plasma-based Bioink Stimulates Cell Proliferation and Differentiation in Bioprinted, Mineralized Constructs.
ACS Appl Mater Interfaces 2020, 12, 12557-12572 Full text |
| 14 | P. Korn, T. Ahlfeld, F. Lahmeyer, D. Kilian, P. Sembdner, R. Stelzer, W. Pradel, A. Franke, M. Rauner, U. Range, B. Stadlinger, A. Lode, G. Lauer, M. Gelinsky: 3D Printing of Bone Grafts for Cleft Alveolar Osteoplasty –in vivo Evaluation in a Preclinical Model. Front Bioeng Biotechnol 2020, 8, 217, (16 pages) Full text |
| 13 | H. Bretschneider, M. Quade, A. Lode, M. Gelinsky, S. Rammelt, S. Zwingenberger, K.-D. Schaser, C. Vater: Characterization of naturally occurring bioactive factor mixtures for bone regeneration. Int J Mol Sci 2020, 21, 1412 (15 pages) Full text |
| 12 | M. Gelinsky: Latest advances of bioprinting in space (interview). J 3D Print Med 2020, 4, 1 - 4 Full text |
| 11 | J. Emmermacher, D. Spura, J. Cziommer, D. Kilian, T. Wollborn, U. Fritsching, J. Steingroewer, T. Walther, M. Gelinsky, A. Lode: Engineering considerations on extrusion-based bioprinting: Interactions of material behaviour, mechanical forces and cells in the printing needle. Biofabrication 2020, 12, 025022 (21 pages) Full text |
| 10 | V. Mutsenko, S. Knaack, L. Lauterboeck, D. Tarusin, B. Sydykov, R. Cabiscol, D. Ivnev, J. Belikan, A. Beck, D. Dipresa, A. Lode, T. El Khassawna, M. Kampschulte, R. Scharf, A. Yu Petrenko, S. Korossis, W. F. Wolkers, M. Gelinsky, O. Gryshkov: Effect of ‘in air’ freezing on post-thaw recovery of Callithrix jacchus mesenchymal stromal cells and properties of 3D collagen-hydroxyapatite-scaffolds. Cryobiol 2020, 92, 215 - 230 Full text |
| 9 | F. Peters, K. Bahrini, A.M. Placht, M. Gelinsky: Beladung und kontrollierte Freisetzung von Antibiotika aus Biomaterialien für die Knochenregeneration. Orthop Unfallchir Praxis 2020, 9, 47 - 49 |
| 8 | J. Li, Ch. Wu, P. K. Chu, M. Gelinsky: 3D printing of hydrogels: Rational design strategies and emerging biomedical applications. Mater Sci Eng R 2020, 140, 100543 (76 pages) Full text |
| 7 | C. Czichy, J. Spangenberg, S. Günther, M. Gelinsky, S. Odenbach: Determination of the Young's modulus for alginate-based hydrogel with magnetite-particles depending on storage conditions and particle concentration. J Magnetism Magn Mater 2020, 501, 166395 Full text |
| 6 | M. Quade, P. Münch, A. Lode, S. Duin, C. Vater, A. Gabrielyan, A. Rösen-Wolff, M. Gelinsky: The Secretome of Hypoxia Conditioned hMSC Loaded in a Central Depot Induces Chemotaxis and Angiogenesis in a Biomimetic Mineralized Collagen Bone Replacement Material. Adv Healthcare Mater 2020, 9, 1901426 (14 pages) Full text |
| 5 | A. Bernhardt, V. Oesterreich, M. Gelinsky: 3D co-culture of primary human osteocytes and mature human osteoclasts in collagen gels. Tissue Engin A 2020, 26, 647 - 655 Full text |
| 4 | H. Bretschneider, J. Mettelsiefen, C. Rentsch, M. Gelinsky, H. D. Link, K.-P. Günther, A. Lode, Ch. Hofbauer: Evaluation of topographical and chemical modified TiAl6V4 implant surfaces in a weight-bearing intramedullary femur model in rabbit. J Biomed Mater B Appl Biomater 2020, 108B, 1117 - 1128 Full text |
| 3 | A. Bernhardt, E. Weiser, S. Wolf, C. Vater, M. Gelinsky: An improved method to isolate primary human osteocytes from bone. Biomed Eng 2020, 65(1), 107-111Full text |
| 2 | M. Quade, C. Vater, S. Schlootz, J. Bolte, R. Langanke, H. Bretschneider, M. Gelinsky, S. B. Goodman, S. Zwingenberger: Strontium enhances BMP-2 mediated bone regeneration in a femoral murine bone defect model. J Biomed Mater Res B 2020, 108B, 174 - 182 Full text |
| 1 | R. Schmidt, A. Gebert, M. Schumacher, V. Hoffmann, A. Voss, S. Pilz, M. Uhlemann, A. Lode, M. Gelinsky: Electrodeposition of Sr-substituted hydroxyapatite on low modulus beta-type Ti-45Nb and effect on in vitro Sr release and cell response. Mater Sci Eng C 2020, 108, 110425 Full text |
2019
| 25 | R. Rothe, S. Schulze, C. Neuber, S. Hauser, S. Rammelt, J. Pietzsch: Adjuvant drug-assisted bone healing: Part III - Further strategies for local and systemic modulation. Clinical Hemorheology and Microcirculation 2019, 73, 439 - 488 Full text |
| 24 | R. Rothe, S. Schulze, C. Neuber, S. Hauser, S. Rammelt, J. Pietzsch: Adjuvant drug-assisted bone healing: Part II–Modulation of angiogenesis. Clinical Hemorheology and Microcirculation 2019, 73, 409 - 438 Full text |
| 23 | R. Rothe, S. Schulze, C. Neuber, S. Hauser, S. Rammelt, J. Pietzsch: Adjuvant drug-assisted bone healing: Part I–Modulation of inflammation. Clinical Hemorheology and Microcirculation 2019, 73, 381-408 Full text |
| 22 | J. Nowotny, F. Bischoff, T. Ahlfeld, J. Goronzy, E. Tille, U. Nimtschke, A. Biewener:
Biomechanical comparison of bi- and tricortical k-wire fixation in tension band wiring osteosynthesis. |
| 21 | O. Luzanin, D. Movrin, V. Stathopoulos, P. Pandis, T. Radusin, V. Guduric: Impact of processing parameters on tensile strength, in-process crystallinity and mesostructure in FDM-fabricated PLA specimens. Rapid Prototyping J 2019, 25, 1398–1410 Full text |
| 20 | L. Li, Z. Ling, W. Dong, X. Chen, C. Vater, H. Liao, Q. Qi, H. Hu, Y. Chen, M. Gelinsky, M. Stiehler, X. Zou: Dnmt3a-Mediated DNA Methylation Changes Regulate Osteogenic Differentiation of hMSCs Cultivated in the 3D Scaffolds under Oxidative Stress. Oxidative Medicine and Cellular Longevity 2019, 4824209, (13 pages) Full text |
| 19 | V. Kovalchuk, A. Voronkina, B. Binnewerg, M. Schubert, L. Muzychka, M. Wysokowski, M. Tsurkan, N. Bechmann, I. Petrenko, A. Fursov, R. Martinović, V. N. Ivanenko, J. Fromont, O. B. Smolii, Y. Joseph, M. Giovine, D. Erpenbeck, M. Gelinsky, A. Springer, K. Guan, S. R. Bornstein, H. Ehrlich: Naturally drug loaded chitin: isolation and applications. Marine Drugs 2019, 17, 574 (17 pages) Full text |
| 18 | T. Li, D. Zhai, B. Ma, J. Xue, P. Zhao, J. Chang, M. Gelinsky, C. Wu: 3D Printing of Hot Dog-Like Biomaterials with Hierarchical Architecture and Distinct Bioactivity. Adv Sci 2019, 6, 1901146 (8 pages) Full text |
| 17 | V. Mutsenko, O. Gryshkov, O. Rogulska, A. Lode, A. Yu. Petrenko, M. Gelinsky, B. Glasmacher, H. Ehrlich: Chitinous Scaffolds from Marine Sponges for Tissue Engineering. In: A. Choi, B. Ben-Nissan (eds.): Marine-Derived Biomaterials for Tissue Engineering Applications. Springer Series in Biomaterials Science and Engineering 2019, Vol 14, 285-307 Full text |
| 16 | P. S. Lee, R. Hess, J. Friedrichs, V. Haenchen, H. Eckert, G. Cuniberti, D. Rancourt, R. Krawetz, V. Hintze, M. Gelinsky, D. Scharnweber: Recapitulating bone development events in a customised bioreactor through interplay of oxygen tension, medium pH and systematic differentiation approaches. J Tissue Eng Regen Med 2019, 13, 1672 - 1684 Full text |
| 15 | T. Tariverdian, F. Sefat, M. Gelinsky, M. Mozafari: Scaffold for bone tissue engineering. In: M. Mozafari, F. Sefat, A. Atala (eds.), Handbook of Tissue Engineering Scaffolds. Elsevier/Woodhead Publishing, Series in Biomaterials. 2019, Vol. 1, 189-209 Full text |
| 14 | R. F. Richter, T. Ahlfeld, M. Gelinsky, A. Lode: Development and characterization of composites consisting of calcium phosphate cements and mesoporous bioactive glass for extrusion-based fabrication. Materials 2019, 12, 2022 (16 pages) Full text |
| 13 | J. Li, W. Liu, D.Kilian, X. Zhang, M. Gelinsky and P. K. Chu: Bioinspired interface design modulates pathogen and immunocyte responses in biomaterial-centered infection combination therapy. Mater Horiz 2019, 6, 1271 - 1282 Full text |
| 12 | J. Skottke, M. Gelinsky, A. Bernhardt: In Vitro Co-culture Model of Primary Human Osteoblasts and Osteocytes in Collagen Gels. Int. J. Mol. Sci 2019, 20, 1998 (12 pages) Full text |
| 11 | R. Tonndorf E. Gossla, D. Aibibu, M. Lindner, M. Gelinsky, C. Cherif: Wet spinning and riboflavin crosslinking of collagen type I/III filaments. Biomed Mater 2019, 14, 015007 (12 pages) Full text |
| 10 | T. Ahlfeld, F. P. Schuster, Y. Förster, M. Quade, A. R. Akkineni, C. Rentsch, S. Rammelt, M. Gelinsky, A. Lode: 3D Plotted Biphasic Bone Scaffolds for Growth Factor Delivery: Biological Characterization in vitro and in vivo. Adv Healthcare Mater 2019, 8, 1801512 (14 pages) Full text |
| 9 | S. Duin, K. Schütz, T. Ahlfeld, S. Lehmann, A. Lode, B. Ludwig, M. Gelinsky: 3D Bioprinting of Functional Islets of Langerhans in an Alginate/Methylcellulose Hydrogel-Blend. Adv Healthcare Mater 2019, 8, 1801631 (14 pages) Full text |
| 8 | C. Kern. M. Quade, S. Ray, J. Thomas, M. Schumacher, M. Gelinsky, V. Alt, M. Rohnke: Investigation of strontium transport and strontium quantification in cortical rat bone by time-of-flight secondary ion mass spectrometry. J R Soc Interface 2019, 16, 20180638 Full text |
| 7 | J. Bolte, C. Vater, A. C. Culla, T. Ahlfeld, J. Nowotny, Ph. Kaster, A. C. Disch, S. B. Goodman, M. Gelinsky, M. Stiehler, S. Zwingenberger: 2‐step stem cell therapy improves bone regeneration compared to concentrated bone marrow therapy. J Orthop Res 2019, 37, 1318 - 1328 Full text |
| 6 | P. Busse, C. Vater, M. Stiehler, J. Nowotny, P. Kasten, H. Bretschneider, S. B. Goodman, M. Gelinsky, S. Zwingenberger: Cytotoxicity of intraarticular injected drugs in orthopaedics. Bone Joint Res 2019, 8, 41-48 Full text |
| 5 | A. Bernhardt, E. Weiser, S. Wolf, C. Vater and M. Gelinsky: Primary human osteocyte networks in pure and modified collagen gels. Tissue Eng A 2019, 25, 1347 - 1355 Full text |
| 4 | R. Abdelgaber, D. Kilian, H. Fiehn: Bioscaffolding: A New Innovative Fabrication Process. In: M. Maniruzzaman (ed.), 3D and 4D Printing in Biomedical Applications: Process Engineering and Additive Manufacturing. Wiley-VCH 2019, 113-143 Full text |
| 3 | E. Hodder, S.Duin, D. Kilian, T. Ahlfeld, J. Seidel, C. Nachtigall, P. Bush, D. Covill, M. Gelinsky, A. Lode: Investigating the effect of sterilisation methods on physical properties and cytocompatibility of methyl cellulose used in combination with alginate for 3D-bioplotting of chondrocytes. J Mater Sci Mater Med 2019, 30, 10 Full text |
| 2 | A.-S. Wagner, M. Schumacher, M. Rohnke, K. Glenske, M. Gelinsky, S. Arnhold, S. Mazurek, S. Wenisch: Incorporation of silicon into strontium modified calcium phosphate bone cements promotes osteoclastogenesis of human peripheral mononuclear blood cells. Biomed Mater 2019, 14, 025004 (9 pages) Full text |
| 1 | J. Groll, J. Burdick, D.-W. Cho, B. Derby, M. Gelinsky, S. Heilshorn, T. Juengst, J. Malda, V. Mironov, K. Nakayama, A. Ovsianikov, W. Sun, S. Takeuchi, J. Yoo, T. Woodfield: A Definition of Bioinks and their Distinction from Biomaterial Inks. Biofabrication 2019, 11, 013001 (5 pages) Full text |
2018
| 20 | V. Kauschke, M. Schneider, A. Jauch, M. Schumacher, M. Kampschulte, M. Rohnke, A. Henss, C. Bamberg, K. Trinkaus, M. Gelinsky, Ch. Heiss, K. Lips: Effects of a pasty bone cement containing Brain-Derived Neurotrophic Factor-functionalized mesoporous bioactive glass particles on metaphyseal fracture healing in a murine model of osteoporosis. Int J Mol Sci 2018, 19, 3531 Full text |
| 19 | F. Albrecht Vechietti, N. Oderich Muniz, K. Rezwan, M. Schumacher, M. Gelinsky, L. A. Loureiro dos Santos: Influence of cobalt chromium alloy surface modification on the roughness and wettability behavior of pine oil / hydroxyapatite as coating. Mater Res Expr 2018, 6, 05401 (14 pages) Full text |
| 18 |
R. Brünler, M. Eger, S. Lukoschek, D. Aibibu, Ch. Cherif, A. Breier, C. Elschner, J. Hahn, L. Bittrich, A. Spickenheuer, C. Vater, C. Petto, M. Gelinsky: Embroidered hernia meshes made of chitosan with locally adjustable, graded stiffnesses for use as implant material. |
| 17 |
D. Weber, S. Knaak, K. Hettrich, M. Andrulis, F. Momburg, M. Quade, M. Gelinsky, R. Schwartz-Albiez: Influence of regioselectively sulfated cellulose on in vitro vascularization of biomimetic bone matrices. |
| 16 | E. Trampe, K. Koren, A. R. Akkineni, Ch. Senwitz, F. Krujatz, A. Lode, M. Gelinsky, M. Kühl: Functionalized bioink with optical sensor nanoparticles for O2 imaging in 3D bioprinted constructs. Adv Funct Mater 2018, 28, 1804411 (11 pages) Full text |
| 15 | T. Ahlfeld, T. Köhler, Ch. Czichy, A. Lode, M. Gelinsky: A Methylcellulose Hydrogel as Support for 3D Plotting of Complex Shaped Calcium Phosphate Scaffolds. Gels 2018, 4, 68 (14 pages) Full text |
| 14 | T. Ahlfeld, F. Doberenz, D. Kilian, C. Vater, P. Korn, G. Lauer, A. Lode, M. Gelinsky: Bioprinting of mineralized scaffolds utilizing multichannel plotting of a self-setting calcium phosphate cement and a cell-laden bioink. Biofabrication 2018, 10, 045002 (14 pages) Full text |
| 13 | R. Tonndorf, E. Gossla, R. T. Kocaman, M. Kirsten, R.-D. Hund, G. Hoffmann, D. Aibibu, M. Gelinsky, Ch. Cherif: Factors affecting the mechanical and geometrical properties of electrostatically flocked pure chitosan fibre scaffolds. Textile Res J 2018, 88, 1965–1978 Full text |
| 12 | R. Galli, K. H. Sitoci-Ficici, O. Uckermann, R. Later, M. Marečková, M. Koch, E. Leipnitz, G. Schackert, E. Koch, M. Gelinsky, G. Steiner, M. Kirsch: Label-free multiphoton microscopy reveals relevant tissue changes induced by alginate hydrogel implantation in rat spinal cord injury. Sci Rep 2018, 8, 10841 (13 pages) Full text |
| 11 | G. Filardo, F. Perdisa, M. Gelinsky, F. Despang, M. Fini, M. Marcacci, A. P. Parrilli, A. Roffi, F. Salamanna, M. Sartori, K. Schütz, E. Kon: Novel alginate biphasic scaffold for osteochondral regeneration: an in vivo evaluation in rabbit and sheep models. J Mater Sci Mater Med 2018, 29, 74 (13 pages) Full text |
| 10 | M. V.J. Braham, T. Ahlfeld, A. R. Akkineni, M. C. Minnema, W. J. A. Dhert, F. C. Öner, C. Robin, A. Lode, M. Gelinsky, J. Alblas: Endosteal and perivascular subniches in a 3D bone marrow model for multiple myeloma. Tissue Engin C Methods 2018, 24, 300 - 312 Full text |
| 9 | M. Quade, A. Lode, A. Gabrielyan, A. Rösen-Wolff, M. Gelinsky: Therapie von Knochendefekten mit geringer Regenerationskapazität. Orthopädische Nachrichten 2018, 4,14 Full text |
| 8 | A. Bernhardt, B. Paul, M. Gelinsky: Biphasic scaffolds from marine collagens for regeneration of osteochondral defects. Marine Drugs 2018, 16, 91 (16 pages) Full text |
| 7 | M. Gelinsky: Biopolymer Hydrogel Bioinks. In: I. S. Whitaker, Z. Jessop, D. Thomas (eds.), 3D Bioprinting for Reconstructive Surgery: Techniques and Applications. Elsevier 2018, 125 - 136 Full text |
| 6 | B. Rentsch, A. Bernhardt, A. Henss, S. Ray, C. Rentsch, M. Schamel, U. Gbureck, M. Gelinsky, S. Rammelt, A. Lode: Trivalent chromium incorporated in a crystalline calcium phosphate matrix accelerates materials degradation and bone formation in vivo. Acta Biomater 2018, 69, 332 - 341 Full text |
| 5 | K. Hakan Sitoci-Ficici, M. Matyash, O. Uckermann, R. Galli, E. Leipnitz, R. Later, B. Rieger, Ch. Ikonomidou, M. Gelinsky, G. Schackert, M. Kirsch: Non-functionalized soft alginate hydrogel promotes locomotor recovery after spinal cord injury in a rat hemimyelonectomy model. Acta Neurochir 2018, 160, 449 - 457 Full text |
| 4 | J. Hufenbach, F. Kochta, H. Wendrock, A. Voß, L. Giebeler, S. Oswald, S. Pilz, U. Kühn, A. Lode, M. Gelinsky, A. Gebert: S and B microalloying of biodegradable Fe-30Mn-1C - Effects on microstructure, tensile properties, in vitro degradation and cytotoxicity. Materials & Design 2018, 142, 22 - 35 Full text |
| 3 | M. Gelinsky: 3D Printing. In: H. Rivas, K. Wac (eds.), Digital Health, Scaling Healthcare to the World. Springer 2018, 109 - 122 Full text |
| 2 | M. Quade, M. Schumacher, A. Bernhardt, A. Lode, M. Kampschulte, A. Voss, P. Simon, O. Uckermann, M. Kirsch, M. Gelinsky: Strontium-modification of porous scaffolds from mineralized collagen for potential use in bone defect therapy. Mater Sci Eng C 2018, 84, 159–167 Full text |
| 1 | A. Lode, C. Heiss, G. Knapp, J. Thomas, B. Nies, M. Gelinsky, M. Schumacher: Strontium-modified premixed calcium phosphate cements for the therapy of osteoporotic bone defects. Acta Biomaterialia 2018, 65, 475-485 Full text |
2017
| 28 | R. Pytlík, C. Rentsch, T. Soukup, L. Novotný, B. Rentsch, V. Kanderová, H. Rychtrmocová, M. Kalmárová, D. Stehlík, M. Trněný, O. Slanař: Efficacy and Safety of Human Mesenchymal Stromal Cells in Healing of Critical-Size Bone Defects in Immunodeficient Rats. Physiol. Res. 2017, 66, 113-123 Full text |
|
| 27 | J. Seidel, T. Ahlfeld, M. Adolph, S. Kümmritz, J. Steingroewer, F. Krujatz, Th. Bley, M. Gelinsky, A. Lode: Green Bioprinting: Extrusion-based fabrication of plant cell-laden biopolymer hydrogels scaffolds. Biofabrication 2017, 9, e045011 (11 pages) Full text |
|
| 26 | M. Göttlicher, M. Rohnke, Y. Moryson, J. Thomas, J. Sann, A. Lode, M. Schumacher, R. Schmidt, S. Pilz, A. Gebert, T. Gemming, J. Janek: Functionalization of Ti-40Nb Implant Material with Strontium by Reactive Sputtering. Biomater Res 2017, 18, (11 pages) Full text |
|
| 25 | A. Gabrielyan, E. Neumann, M. Gelinsky, A. Rösen-Wolff: Metabolically-Conditioned Media Derived from Bone Marrow Stroma Cells or Human Skin Fibroblasts act as Effective Chemoattractants for Mesenchymal Stem Cells. Stem Cell Res Ther 2017 (accepted) |
|
| 24 | F. Krujatz, A. Lode, J. Seidel, Th. Bley, M. Gelinsky, J. Steingroewer: Additive Biotech - Chances, challenges, and recent applications of additive manufacturing technologies in biotechnology. New Biotech 2017 in press |
|
| 23 | V. V. Mutsenko, V. V. Bazhenov, O. Rogulska, D. N. Tarusin, K. Schütz, S. Brüggemeier, E. Gossla, A. R. Akkineni, H. Meißner, A. Lode, S. Meshke, A. Ehrlich, S. Petović, R. Martinovic, M. Djurović, A. L. Stelling, S. Nikulink, S. Rodinj, A. Tonevitskyj, M. Gelinsky, A. Y. Petrenkoa, B. Glasmacher, H. Ehrlich: 3D chitinous scaffolds derived from cultivated marine demosponge Aplysina aerophoba for tissue engineering approaches based on human mesenchymal stromal cells. Int J Biol Macromol 2017 Full text |
|
| 22 | V. V. Mutsenko, O. Gryshkov , L. Lauterboeck, O. Rogulska, D. N. Tarusin, Vasilii V. Bazhenov d, K. Schütz, S. Brüggemeier, E. Gossla, A. R. Akkineni, H. Meißner , A. Lode, St. Meshke, J. Fromont, A. L. Stelling, K. R. Tabachniki, M. Gelinsky, S. Nikuling, S. Rodink, A. G. Tonevitskyk Alexander Y. Petrenko, B. Glasmacher, P. Schupp, H. Ehrlich: Novel chitin scaffolds derived from marine sponge Ianthella basta for tissue engineering approaches based on human mesenchymal stromal cells:Biocompatibility and cryopreservation. Int J Biol Macromol 2017, 4, 1955 - 1965 Full text |
|
| 21 | A. Bernhardt, M. Schamel, U. Gbureck, M. Gelinsky: Osteoclastic differentiation and resorption is modulated by bioactive metal ions Co2+, Cu2+ and Cr3+ incorporated into calcium phosphate bone cements. PLoS One 2017, e0182109 (18 pages) Full text |
|
| 20 | M. Quade, S. Knaack, A.R. Akkineni, A. Gabrielyan, A. Lode, A. Rösen-Wolff, M. Gelinsky: Central growth factor loaded depots in bone tissue engineering scaffolds for enhanced cell attraction. Tissue Engin A 2017, 23, 762 - 772 Full text |
|
| 19 | D. Kilian, T. Ahlfeld, A. R. Akkineni, A. Lode, M. Gelinsky: 3D Bioprinting of Volumetric Tissues and Organs. MRS Bull 2017, 42, 582 - 592 Full text |
|
| 18 | M. Rohnke, S. Pfitzenreuter, B. Mogwitz, A. Henß, J. Thomas, D. Bieberstein, T. Gemming, S.K. Otto, S. Ray, M. Schumacher, M. Gelinsky, V. Alt: Strontium release from Sr2+-loaded bone cements and dispersion in healthy and osteoporotic rat bone. J Contr Release 2017, 262, 159 - 169 Full text |
|
| 17 | A. Henß, M. Schamel, U. Gbureck, M. Gelinsky, A. Lode: Data on TOF-SIMS analysis of Cu2+, Co2+ and Cr3+ doped calcium phosphate cements. Data Brief 2017, 13, 353 - 355 Full text |
|
| 16 | T. Ahlfeld, G. Cidonio, D. Kilian, S. Duin, A. Akkineni, J. Dawson, S. Yang, A. Lode, R. Oreffo, M. Gelinsky: Development of a clay based bioink for 3D cell printing for skeletal application. Biofabrication 2017, 9, e034103 (16 pages) Full text |
|
| 15 | J. Steingroewer, C. Haas, K. Winkler, C. Schott, J. Weber, J. Seidel, F. Krujatz, S. Kümmritz, A. Lode, M. L. Socher, M. Gelinsky, T. Bley: Monitoring of Plant Cells and Tissues in Bioprocesses. In: A. Pavlov, T. Bley (eds.): Bioprocessing of Plant In Vitro SYstems, Reference Series in Phytochemistry. Springer 2016 Full text |
|
| 14 | M. Schamel, J. Barralet, M. Gelinsky, J. Groll, U. Gbureck: Intrinsic 3D prestressing: a new route for increasing strength and improving toughness of hybrid inorganic biocements. Adv Mater 2017, e2023853 (10 pages) Full text |
|
| 13 | P. S. Lee, H. Eckert, R. Hess, M. Gelinsky, D. Rancourt, R. Krawetz, G. Cuniberti, D. Scharnweber: Developing a customized perfusion bioreactor prototype with controlled positional variability in oxygen partial pressure for bone and cartilage tissue engineering. Tissue Engin C: Methods 2017, 23, 286 - 297 Full text |
|
| 12 | T. E. Khassawna, D. E. Daghma, S. Stoetzel, S. Ray, S. Kern, D. Malhan, V. Alt, U. Thormann, A. Henß, M. Rohnke, A. Stengel, F. Hassan, S. Maenz, K. Jandt, M. Diefenbeck, M. Schumacher, M. Gelinsky, K. Lips, C. Heiß: Post-embedding decalcification of mineralized tissue sections preserves the integrity of implanted biomaterials and minimizes number of experimental animals. BioMed Res Int 2017, e2023853, (10 Seiten) Full text |
|
| 11 | M. Schumacher, L. Reither, J. Thomas, M. Kampschulte, U. Gbureck, A. Lode, M. Gelinsky: Calcium phosphate bone cement/mesoporous bioactive glass composites for controlled growth factor delivery. Biomater Sci 2017, 5, 578-588 Full text |
|
| 10 | A. Bernhardt. K. Koperski, M. Schumacher, M. Gelinsky: Relevance of osteoclast-specific enzyme activities in cell-based in vitro resorption assays. Eur Cell Mater 2017, 33, 28-42 Full text |
|
| 9 | Y. Luo, G. Luo, M. Gelinsky, P. Huang, Ch. Ruan: 3D bioprinting scaffold using alginate/polyvinyl alcohol bioinks. Mater Lett 2017, 189, 295-298 Full text |
|
| 8 | S. Giron, A. Lode, M. Gelinsky: In situ functionalisation of scaffolds during extrusion based 3D plotting using a piezoelectric nanolitre pipette. J 3D Printing Med 2017, 1, 25-29 Full text |
|
| 7 | M. Gelinsky: Current research directions in 3D printing in medicine (Editorial). J 3D Printing Med 2017, 1, 5-7 Full text |
|
| 6 | M. Schamel, A. Bernhardt, M. Quade, C. Würkner, U. Gbureck, C. Moseke, M. Gelinsky, A. Lode: Cu2+, Co2+ and Cr3+ doping of a calcium phosphate cement influences materials properties and response of human mesenchymal stromal cells. Mat Sci Eng C 2017, 73, 99-110 Full text |
|
| 5 | Y. Förster, R. Bernhardt, V. Hintze, S. Möller, M. Schnabelrauch, D. Scharnweber, S. Rammelt: Collagen/glycosaminoglycan coatings enhance new bone formation in a critical size bone defect — A pilot study in rats. Mat Sci Eng C 2017, 71, 84-92 Full text | |
| 4 | M. Quade, S. Knaack, D. Weber, U. König, B. Paul, P. Simon, A. Rösen-Wolff, R. Schwartz-Albiez, M. Gelinsky, A. Lode: Heparin modification of a biomimetic bone matrix modulates osteogenic and angiogenic cell response in vitro. Eur Cell Mater 2016, 33, 105-120 Full text |
|
| 3 | M. Quade, S. Knaack, D. Weber, U. König, B. Paul, P. Simon, A. Rösen-Wolff, R. Schwartz-Albiez, M. Gelinsky, A. Lode: Heparin modification of a biomimetic bone matrix modulates osteogenic and angiogenic cell response in vitro. Eur Cell Mater 2017, 33, 105-120 Full text |
|
| 2 | W. Pustlauk, B. Paul, S. Brueggemeier, M. Gelinsky, A. Bernhardt: Modulation of chondrogenic differentiation of human mesenchymal stem cells in jellyfish collagen scaffolds by cell density and culture medium. J Tissue Eng Regen Med 2017, 11, 1710 - 1722 Full text |
|
| 1 | K. Schütz, A.-M. Placht, B. Paul, S. Brüggemeier, M. Gelinsky, A. Lode: 3D plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions. J Tissue Eng Regen Med 2017, 11, 1574 - 1587 Full text |
2016
| 29 | A. Bernhardt. K. Koperski, M. Schumacher, M. Gelinsky: Relevance of osteoclast-specific enzyme activities in cell-based in vitro resorption assays. Eur Cell Mater 2016 (accepted) |
| 28 |
Y. Luo, G. Luo, M. Gelinsky, P. Huang, Ch. Ruan: 3D bioprinting scaffold using alginate/polyvinyl alcohol bioinks. |
| 27 |
M. Heller, H.-K. Bauer, E. Goetze, M. Gielisch, I. T. Ozbolat, K. K. Moncal, E. Rizk, H. Seitz, M. Gelinsky, H. C. Schröder, X. H. Wang, W. E. G. Müller, B. Al-Nawas: Materials and Scaffolds in Medical 3D Printing and Bioprinting in the Context of Bone Regeneration. |
| 26 | M. Quade, S. Knaack, D. Weber, U. König, B. Paul, P. Simon, A. Rösen-Wolff, R. Schwartz-Albiez, M. Gelinsky, A. Lode: Heparin modification of a biomimetic bone matrix modulates osteogenic and angiogenic cell response in vitro. Eur Cell Mater 2016 (accepted) |
| 25 | Y. Förster, J.R. Schmidt, D.K. Wissenbach, S.E. Pfeiffer, S. Baumann, L.C. Hofbauer , M. von Bergen, S. Kalkhof, S. Rammelt: Microdialysis Sampling from Wound Fluids Enables Quantitative Assessment of Cytokines, Proteins, and Metabolites Reveals Bone Defect-Specific Molecular Profiles. PLoS One 2016, 11, e0159580 (24 Seiten) Full text |
| 24 |
S. Giron, A. Lode, M. Gelinsky: In situ functionalisation of scaffolds during extrusion based 3D plotting using a piezoelectric nanolitre pipette. |
| 23 |
A. R. Akkineni, T. Ahlfeld, A. Lode, M. Gelinsky: A versatile method for combining different biopolymers in a core/shell fashion by 3D plotting to achieve mechanically robust constructs. |
|
22 |
E. Gossla, R. Tonndorf, A. Bernhardt, M. Kirsten, R.-D. Hund, D. Aibibu, Ch. Cherif, M. Gelinsky: Electrostatic flocking of chitosan fibres leads to highly porous, elastic and fully biodegradable anisotropic scaffolds. |
|
21 |
M. Schumacher, A. S. Wagner, J. Kokesch-Himmelreich, A. Bernhardt, M. Rohnke, S. Wenisch, M. Gelinsky: Strontium substitution in apatitic CaP cements effectively attenuates osteoclastic resorption but does not inhibit osteoclastogenesis. |
|
20 |
T. Ahlfeld, A. R. Akkineni, Y. Förster, T. Köhler, S. Knaack, M. Gelinsky, A. Lode: Design and fabrication of complex scaffolds for bone defect healing: combined 3D plotting of a calcium phosphate cement and a growth factor-loaded hydrogel. |
|
19 |
M. Stiehler, J. Rauh, C. Bunger, A. Jacobi, C. Vater, T. Schildberg, C. Liebers, K.-P. Gunther, H. Bretschneider: In vitro characterization of bone marrow stromal cells from osteoarthritic donors. |
|
18 |
W. Pustlauk, B. Paul, M. Gelinsky, A. Bernhardt: Jellyfish collagen and alginate: Combined marine materials for superior chondrogenesis of hMSC. |
|
17 |
M. Bartnikowski, A. R. Akkineni, M. Gelinsky, M. A. Woodruff, T. J. Klein: A hydrogel model incorporating 3D-plotted hydroxyapatite for osteochondral tissue engineering. |
|
16 |
S. Zwingenberger, R. Langanke, C. Vater, G. Lee, E. Niederlohmann, M. Sensenschmidt, A. Jacobi, R. Bernhardt, M. Muders, S. Rammelt, S. Knaack, M. Gelinsky, K.-P. Günther, St. B. Goodman, M. Stiehler: SDF-1alpha enhances low dose BMP-2 mediated bone regeneration by controlled release from heparinized mineralized collagen type I matrix scaffolds in a murine critical size bone defect model. |
|
15 |
A. R. Akkineni, T. Ahlfeld, A. Funk, A. Waske, A. Lode, M. Gelinsky: Highly concentrated alginate/gellan gum composites for 3D plotting of complex tissue engineering scaffolds. |
|
14 |
J. Nowotny, D. Aibibu, J. Farack, U. Nimtschke, M. Hild, M. Gelinsky, P. Kasten, C. Cherif: Novel fiber based pure chitosan scaffold for tendon augmentation: biomechanical and cell biological evaluation |
|
13 |
A. Kumar, S. Mandal, S. Barui, R. Vasireddi, U. Gbureck, M. Gelinsky, B. Basu: Low temperature additive manufacturing of three dimensional scaffolds for bone tissue engineering applications: Processing related challenges and property assessment. |
|
12 |
H. Ehrlich, M. Motylenko, P. V. Sundareshwar, A. Ereskovsky, I. Zglobicka, T. Noga, T. Plocinski, M. V. Tsurkan, E. Wyroba, S. Suski, H. Bilski, M. Wysokowski, H. Stöcker, A. Makarova, D. Vyalikh, J. Walter, S. L. Molodtsov, V. V. Bazhenov, I. Petrenko, E. Langer, A. Richter, E. Niederschlag, M. Pisarek, A. Springer, M. Gelinsky, D. Rafaja, A. Witkowski, D. C. Meyer, T. Jesionowski, K. J. Kurzydlowski: Multiphase Biomineralization: Enigmatic invasive siliceous diatoms produce crystalline calcite. |
|
11 |
A. Lode, M. Meyer, S. Brüggemeier, B. Paul, H. Baltzer, M. Schröpfer, C. Winkelmann, F. Sonntag, M. Gelinsky: Additive manufacturing of collagen scaffolds by three-dimensional plotting of highly viscous dispersions. |
|
10 |
M. Gelinsky: Current research directions in 3D printing in medicine (Editorial). |
|
9 |
J. Nowotny, J. Farack, C. Vater, M. Johnsen, M. Gelinsky, T. Tonn, P. Kasten: Translation of cell therapy into clinical practice: validation of an application procedure for bone marrow progenitor cells and platelet rich plasma. |
|
8 |
A. Kumar, A. R. Akkineni, B. Basu, M. Gelinsky: Three dimensional plotted hydroxyapatite scaffolds with predefined architecture: Comparison of stabilization by alginate cross-linking versus sintering. |
|
7 |
W. Pustlauk, B. Paul, S. Brueggemeier, M. Gelinsky, A. Bernhardt: Modulation of chondrogenic differentiation of human mesenchymal stem cells in jellyfish collagen scaffolds by cell density and culture medium. |
|
6 |
K. Schütz, A.-M. Placht, B. Paul, S. Brüggemeier, M. Gelinsky, A. Lode: 3D plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions. |
|
5 |
F. Despang, C. Halm, K. Schütz, B. Fischer, A. Lode, M. Gelinsky: Fibre reinforced, biphasic composite scaffolds with pore channels and embedded stem cells based on alginate for the treatment of osteochondral defects. |
|
4 |
K. Schütz, F. Despang, A. Lode, M. Gelinsky: Cell-laden biphasic scaffolds with anisotropic structure for the regeneration of osteochondral tissue. |
|
3 |
E.-Ch. Kim, K. Bae, H. S. Kim, Y.-M. Yoo, M. Gelinsky, T.-J. Kim: Hot water extract of scutellaria baicalensis inhibits migration, invasion and tube formation in a human umbilical vein endothelial cell model and a rat aortic ring sprouting model. |
|
2 |
W. Pompe, M. Gelinsky: Biological Structures: Failure of Bone and Teeth. |
|
1 |
Y.-H. Lee, W.-J. Kim, D.-H. Seo, H.-S. Kim, M. Gelinsky, T.-J. Kim: Anti-skeletal muscle atrophy effect of oenothera odorata root extract via reactive oxygen species-dependent signaling pathways in cellular and mouse model. |
2015
|
19 |
S. Tamosaityte, R. Galli, O. Uckermann, K. H. Sitoci-Ficici, R. Later, R. Beiermeister, F. Doberenz, M. Gelinsky, E. Leipnitz, G. Schackert, E. Koch, V. Sablinskas, G. Steiner, M. Kirsch: Biochemical monitoring of spinal cord injury by FT-IR spectroscopy - Effects of therapeutic alginate implant in rat models. |
|
18 |
S. Ternes, K. Trinkaus, I. Bergen, S. Knaack, M. Gelinsky, O. Kilian, Ch. Heiss, K. S. Lips: Impact of acetylcholine and nicotine on human osteoclastogenesis in vitro. |
|
17 |
M. Gelinsky, A. Bernhardt, F. Milan: Bioreactors in tissue engineering: Advances in stem cell culture and three-dimensional tissue constructs. |
|
16 |
F. Krujatz, A. Lode, S. Brüggemeier, K. Schütz, J. Kramer, Th. Bley, M. Gelinsky, J. Weber: Green bioprinting: Viability and growth analysis of microalgae immobilized in 3D-plotted hydrogels versus suspension cultures. |
|
15 |
F. Despang, A. Bernhardt, A. Lode, R. Dittrich, Th. Hanke, S. J. Shenoy, S. Mani, A. John, M. Gelinsky: Synthesis, physico-chemical and in vitro/vivo evaluation of an anistropic, nano-crystalline hydroxyapatite bisque scaffold with parallel aligned pores mimicking the microstructure of cortical bone. |
|
14 |
A. R. Akkineni, Y. Luo, M. Schumacher, B. Nies, A. Lode, M. Gelinsky: 3D plotting of growth factor loaded calcium phosphate cement scaffolds. |
|
13 |
Ch. Striegler, M. Schumacher, Ch. Effenberg, M. Müller, A. Seckinger, R. Schnettler, B. Voit, D. Hose, M. Gelinsky, D. Appelhans: Dendritic glycopolymer as drug delivery system for proteasome inhibitor bortezomib in a calcium phosphate bone cement: First steps towards a local therapy of osteolytic bone lesions. |
|
12 |
E.-Ch. Kim, S. H. Kim, K. Bae, H.-S. Kim, M. Gelinsky, T.-J. Kim: Anti-angiogenic Potential of a Hot Water Extract of Phellodendron amurense in vitro and ex vivo. |
|
11 |
M.M. Mkandawire, M. Lakatos, A. Springer, A. Clemens, D. Appelhans, U. Krause-Buchholz, W. Pompe, G. Rödel, M. Mkandawire: |
|
10 |
Y. Tang, A. Jacobi, L. Zou, X. Zou, M. Stiehler: Icariin promotes angiogenic differentiation and prevents oxidative stress-induced autophagy in human endothelial progenitor cells. |
|
9 |
A. Bernhardt, M. Wehrl, B. Paul, Th. Hochmuth, M. Schumacher, K. Schütz, M. Gelinsky: Improved sterilization of sensitive biomaterials with supercritical carbon dioxide at low temperature. |
|
8 |
M. Weil, T. Meißner, W. Busch, A. Springer, D. Kühnel, R. Schulz, K. Duis: The oxidized state of the nanocomposite Carbo-Iron® causes no adverse effects on growth, survival and differential gene expression in zebrafish. |
|
7 |
M. Schumacher, M. Gelinsky: Strontium modified calcium phosphate cements – approaches towards targeted stimulation of bone turnover (Review). |
|
6 |
Y. Luo, A. Lode, A. R. Akkineni, M. Gelinsky: Concentrated gelatin/alginate composites for fabrication of predesigned scaffolds with favorable cell response by 3D plotting. |
|
5 |
T. Gredes, T. Gedrange, C. Hinüber, M. Gelinsky, C. Kunert-Keil: Histological and molecular-biological analyses of poly(3-hydroxybutyrate) (PHB) patches for enhancement of bone regeneration. |
|
4 |
Y. Luo, A. Lode, Ch. Wu, J. Chang, M. Gelinsky: Alginate/nano-hydroxyapatite scaffolds with designed core/shell structures fabricated by 3D plotting and in situ mineralization for bone tissue engineering. |
|
3 |
A. Lode, F. Krujatz, S. Brüggemeier, M. Quade, K. Schütz, S. Knaack, J. Weber, T. Bley, M. Gelinsky: Green bioprinting: Fabrication of photosynthetic algae-laden hydrogel scaffolds for biotechnological and medical applications. |
|
2 |
J. Rauh, A. Jacobi, M. Stiehler: Identification of stable reference genes for gene expression analysis of three-dimensionally cultivated human bone marrow-derived mesenchymal stromal cells for bone tissue Engineering. |
|
1 |
A. Bernhardt, M. Schumacher, M. Gelinsky: Formation of osteoclasts on calcium phosphate bone cements and polystyrene depends on monocyte isolation conditions. |
2014
|
24 |
C. Rentsch, B. Rentsch, S. Heinemann, R. Bernhardt, B. Bischoff, Y. Förster, D. Scharnweber, S. Rammelt: ECM inspired coating of embroidered 3D scaffolds enhances calvaria bone regeneration. |
|
23 |
C. Rentsch, W. Schneiders, S. Manthey, B. Rentsch, S. Rammelt: Comprehensive histological evaluation of bone implants. |
|
22 |
C. Cheng, V. Alt,L. Pan, U. Thormann, R. Schnettler, L.G. Strauss, S. Heinemann, M. Schumacher, M. Gelinsky, B. Nies, A. Dimitrakopoulou-Strauss: Application of F-18-Sodium Fluoride (NaF) Dynamic PET-CT (dPET-CT) for Defect Healing:A Comparison of Biomaterials in an Experimental Osteoporotic Rat Model. |
|
21 |
G. Wittenburg, V. Flade, A. I. Garbe, G. Lauer, D. Labudde: Scaffold preferences of mesenchymal stromal cells and adipose-derived stem cells from green fluorescent protein transgenic mice influence the tissue engineering of bone. |
|
20 |
P. Korn, M. C. Schulz, V. Hintze, U. Range, R. Mai, U. Eckelt, M. Schnabelrauch, S. Möller, J. Becher, D. Scharnweber, B. Stadlinger: Chondroitin sulfate and sulfated hyaluronan-containing Collagen coatings of titanium implants influence peri-implant bone Formation in a minipig model. |
|
19 |
G. Wittenburg, G. Lauer, S. Oswald, D. Labudde, C. M. Franz: Nanoscale topographic changes on sterilized glass surfaces affect cell adhesion and spreading. |
|
18 |
S. Kalkhof, Y. Förster, J. Schmidt, M.C. Schulz, S. Baumann, A. Weißflog, W. Gao, U. Hempel, U. Eckelt, S. Rammelt, M. von Bergen: Proteomics and metabolomics for in situ monitoring of wound healing. |
|
17 |
M. Hoyer, N. Drechsel, M. Meyer, C. Meier, C. Hinüber, A. Breier, J. Hahner, G. Heinrich, C. Rentsch, L.-A. Garbe, W. Ertel, G. Schulze-Tanzil, A. Lohan: Embroidered polymer–collagen hybrid scaffold variants for ligament tissue engineering. |
|
16 |
S. Knaack, A. Lode, B. Hoyer, A. Rösen-Wolff, A. Gabrielyan, M. Gelinsky: Heparin modification of a biomimetic bone matrix for controlled release of VEGF. |
|
15 |
A. Lode, K. Meißner, Y. Luo, F. Sonntag, S. Glorius, B. Nies, C. Vater, F. Despang, Th. Hanke, M. Gelinsky: Fabrication of porous scaffolds by 3D plotting of a pasty calcium phosphate bone cement under mild conditions. |
|
14 |
S. Böhme, H.-J. Stärk, T. Meißner, A. Springer, T. Reemtsma, D. Kühnel, W. Busch: Quantification of Al2O3 nanoparticles in human cell lines applying inductively coupled plasma mass spectrometry (neb-ICP-MS, LA-ICP-MS) and flow cytometry-based Methods. |
|
13 |
Y. Tang, A. Jacobi, C. Vater, X. Zou, M. Stiehler: Salvianolic acid B protects human endothelial progenitor cells against oxidative stress-mediated dysfunction by modulating Akt/mTOR/4EBP1, p38 MAPK/ATF2, and ERK1/2 signaling pathways. |
|
12 |
K. S. Lips, V. Kauschke, S. Hartmann, U. Thormann, S. Ray, V. Alt, M. Schumacher, M. Gelinsky, S. Heinemann, Th. Hanke, A. R. Kautz, M. Schnabelrauch, G. Szalay, Ch. Heiss, R. Schnettler, O. Kilian: Cholinergic nerve fibers in bone defects of a rat osteoporosis model and their regulation by implantation of bone substitution materials. |
|
11 |
M. Matyash, F. Despang, Ch. Ikonomidou, M. Gelinsky: Swelling and mechanical properties of alginate hydrogels with respect to promotion of neural growth. |
|
10 |
Y. Tang, C. Vater, A. Jacobi, C. Liebers, X. Zou, M. Stiehler: Salidroside exerts angiogenic and cytoprotective effects towards human bone marrow derived endothelial progenitor cells via Akt/mTOR/p70S6K and MAPK signalling pathways. |
|
9 |
N. Nosoudi, A. Hasanzadeh, D. Holman, S. M. Rabiee, S. Hesaraki, F. Moztarzadeh, M. Gelinsky: Calcium phosphate/Etidronate disodium biocement: Etidronate, retarder or accelerator. |
|
8 |
Y. Luo, A. R. Akkineni, A. Lode, M. Gelinsky: Three dimensional plotting is a versatile rapid prototyping method for the customized manufacturing of complex scaffolds and tissue engineering constructs. |
|
7 |
A. Gabrielyan, S. Knaak, M. Gelinsky, St. Arnhold, A. Rösen-Wolff: Hypoxia-conditioned media allows species-specific attraction of bone marrow stromal cells without requirement for recombinant proteins. |
|
6 |
U. König, A. Lode, P.B. Welzel, Y. Ueda, S. Knaack, A. Henß, A. Hauswald, M. Gelinsky: Heparinization of a biomimetic bone matrix – integration of heparin during matrix synthesis versus adsorptive surface modification. |
|
5 |
C. Cheng, V. Alt, L. Pan, U. Thormann, R. Schnettler, L. G. Strauss, M. Schumacher, M. Gelinsky, A. Dimitrakopoulou-Strauss: Preliminary evaluation of different biomaterials for defect healing in an experimental osteoporotic rat model with dynamic PET-CT (dPET-CT) using F-18-Sodium Fluoride (NaF). |
|
4 |
J. Rauh, F. Despang, J. Baas, C. Liebers, A. Pruss, M. Gelinsky, K.-P. Günther, M. Stiehler: Comparative biomechanical and microstructural analysis of native versus peracetic acid-ethanol sterilized cancellous bone graft. |
|
3 |
B. Hoyer, A. Bernhardt, A. Lode, S. Heinemann, J. Sewing, M. Klinger, H. Notbohm, M. Gelinsky: Jellyfish collagen scaffolds for cartilage tissue Engineering. |
|
2 |
R. G. Mendes, B. Koch, A. Bachmatiuk, A. A. El-Gendy, Y. Krupskaya, A. Springer, R. Klingeler, O. Schmidt, B. Büchner, S. Sanchez, M. H. Rümmeli: Synthesis and toxicity characterization of carbon coated iron oxide nanoparticles with highly defined size distributions. |
|
1 |
Y. Förster, V. Hintze, C. Rentsch, B. Rentsch, S. Bierbaum, H.-P. Wiesmann, D. Scharnweber, H. Worch, S. Rammelt: Surface functionalization of biomaterials with tissue-inductive artificial extracellular matrices. |
2013
|
27 |
A. Henss, M. Rohnke, Sven Knaack, M. Kleine-Boymann, T. Leichtweiss, P. Schmitz, T. El Khassawna, M. Gelinsky, C. Heiss, J. Janek: Quantification of calcium content in bone by using ToF-SIMS – a first Approach. |
|
26 |
N. Tödtmann, A. Lode, R. Mann, R. Mai, G. Lauer, K. Wieczorek, U. Eckelt: Influence of different modifications of a calcium phosphate cement on resorption and new bone formation: an in vivo study in the minipig. |
|
25 |
S. Zwingenberger, Z. Yao, A. Jacobi, C. Vater, D. R. Valladares, C. Li, C. Nich, A.J. Rao, J. E. Christman, J. K. Antonios, E. Gibon, A. Schambach, T. Mätzig, K. P. Günther, S. B. Goodman, M. Stiehler: Stem cell attraction via SDF-1α expressing fat tissue grafts. |
|
24 |
A. Penk, Y. Förster, H.A. Scheidt, A. Nimptsch, M. Hacker, M. Schulz-Siegmund, P. Ahnert, J. Schiller, S. Rammelt, D. Huster: The pore size of PLGA bone implants determines the de novo formation of bone tissue in tibial head defects in rats. |
|
23 |
K. S. Lips, V. Kauschke, S. Hartmann, U. Thormann, S. Ray, M. Kampschulte, A. Langheinrich, M. Schumacher, M. Gelinsky, S. Heinemann, Th. Hanke, A. R. Kautz, M. Schnabelrauch, R. Schnettler, Ch. Heiss, V. Alt, O. Kilian: Podoplanin immunopositive lymphatic vessels at the implant interface in a rat model of osteoporotic fractures. |
|
22 |
M. Rohnke, A. Henss, J. Kokesch-Himmelreich, M. Schumacher, S. Ray, V. Alt, M. Gelinsky, J. Janek: Mass spectrometric monitoring of Sr enriched bone cements - from in vitro to in vivo. |
|
21 |
C. Heiß, G. S. Maier, M. Gelinsky, D. Hose, R. Schnettler: Klinische Verwendung osteologischer Biomaterialien. |
|
20 |
M. Schumacher, A. Lode, A. Helth, M. Gelinsky: A novel strontium(II)-modified calcium phosphate bone cement stimulates hMSC proliferation and osteogenic differentiation in vitro. |
|
19 |
B. Stadlinger, P. Korn, N. Tödtmann, U. Eckelt, U. Range, A. Bürki, S.J. Ferguson, I. Kramer, A. Kautz, M. Schnabelrauch, M. Kneissel, F. Schlottig: Osseointegration of biochemically modified implants in an osteoporosis rodent model. |
|
18 |
T. Schildberg, J. Rauh, H. Bretschneider, M. Stiehler: Identification of suitable reference genes in bone marrow stromal cells from osteoarthritic donors. |
|
17 |
U. Thormann, S. Ray U. Sommer, Th. ElKhassawna, T. Rehling, M. Hundgeburth, A. Henß, M. Rohnke, J. Janek, K. S. Lips, Ch. Heiss, G. Schlewitz, G. Szalay, M. Schumacher, M. Gelinsky, R. Schnettler, V. Alt: Bone formation induced by strontium modified calcium phosphate cement in critical-size metaphyseal fracture defects in ovariectomized rats. |
|
16 |
J. Kokesch-Himmelreich, M. Schumacher, M. Rohnke, M. Gelinsky, J. Janek: ToF-SIMS analysis of osteoblast-like cells and their mineralized extracellular matrix on strontium enriched bone cements. |
|
15 |
A. Jacobi, J. Rauh, P. Bernstein, C. Liebers, X. Zou, M. Stiehler: Comparative analysis of reference gene stability in human mesenchymal stromal cells during osteogenic differentiation. |
|
14 |
Y. Luo, A. Lode, F. Sonntag, B. Nies, M. Gelinsky: Well-ordered biphasic calcium phosphate/alginate scaffolds fabricated by multi-channel 3D plotting under mild conditions. |
|
13 |
S. Mobini, B. Hoyer, M. Solati-Hashjin, A. Lode, N. Nosoudi, A. Samadikuchaksaraei, M. Gelinsky: Fabrication and characterization of regenerated silk scaffolds reinforced with natural silk fibers for bone tissue engineering. |
|
12 |
A. Bernhardt, R. Dittrich, A. Lode, F. Despang, M. Gelinsky: Nanocrystalline spherical hydroxyapatite granules for bone repair – in vitro evaluation with osteoblast-like cells and osteoclasts. |
|
11 |
I. Tsyganov, A. Lode, Th. Hanke, A. Kolitsch, M. Gelinsky: Osteoblast responses to novel titanium-based surfaces produced by plasma- and ion beam technologies |
|
10 |
Y. Luo, A. Lode, M. Gelinsky: Direct plotting of three-dimensional hollow fiber scaffolds based on concentrated alginate pastes for tissue engineering. |
|
9 |
M. Schumacher, A. Henß, M. Rohnke, M. Gelinsky: A novel and easy to prepare strontium(II) modified calcium phosphate bone cement with enhanced mechanical properties. |
|
8 |
C. Winkelmann, Y. Luo, A. Lode, M. Gelinsky, U. Marx, M. Busek, F. Schmieder, F. Sonntag: Charakterisierung von in Lab-on-Chip Systemen eingebetten Hohlfasern. |
|
7 |
S. Zwingenberger, E. Niederlohmann, C. Vater, S. Rammelt, R. Matthys, R. Bernhardt, R. D. Valladares, S. B. Goodman, M. Stiehler: Establishment of a femoral critical-size bone defect model in immunodeficient mice |
|
6 |
Y. Luo, A. Lode, Ch. Wu, M. Gelinsky: 3D-plotting of bioceramic scaffolds under physiological conditions for bone tissue engineering. |
|
5 |
Y. Förster, W. Gao, A. Demmrich, U. Hempel, L. C. Hofbauer, S. Rammelt: Monitoring the first stages of bone healing with microdialysis. |
|
4 |
A. Bernhardt, A. Lode, F. Peters, M. Gelinsky: Comparative evaluation of different calcium phosphate-based bone graft granules - an in vitro study with osteoblasts. |
|
3 |
C. Moseke, M. Gelinsky, J. Groll, U. Gbureck: Chemical characterization of hydroxyapatite obtained by wet chemistry in the presence of V, Co, and Cu ions. |
|
2 |
M. Scholz, P. Schleicher, A. Sewing, M. Gelinsky, F. Kandziora: Cyclic-RGD is as effective as BMP-2 in anterior interbody fusion of the sheep cervical spine. |
|
1 |
Y. Luo, Ch. Wu, A. Lode, M. Gelinsky: Hierarchical mesoporous bioactive glass/alginate composite scaffolds fabricated by three-dimensional plotting for bone tissue engineering. |
2012
|
14 |
M. Wehrl, M. Gelinsky, A. Bernhardt, T. Hochmuth, J. Bohnen: Entwicklung neurartiger bioresorbierbarer Implantatmaterialien und geeigneter Niedertemperatursterilisationsverfahren auf der Basis von überkritischem CO2. |
|
13 |
J. H. Rölfing, M. Bendtsen, J. Jensen, M. Stiehler, C. B. Foldager, M. B. Hellfritzsch, C. Bünger: Erythropoietin augments bone formation in a rabbit posterolateral spinal fusion model. |
|
12 |
S. Zwingenberger, Ch. Nich, R. D. Valladares, Z. Yao, M. Stiehler, S. B. Goodman: Recommendations and Considerations for the Use of Biologics in Orthopedic Surgery. |
|
11 |
M. C. Schulz, A. Lode, S. Wittig, B. Stadlinger, E. Kuhlisch, U. Eckelt, M. Gelinsky, R. Mai: Characterisation of the osseointegration of Algipore® and Algipore® modified with mineralised collagen type I. |
|
10 |
W. Schneiders, C. Rentsch, S. Rehberg, S. Rein, H. Zwipp, S. Rammelt: Effect of chondroitin sulfate on osteogenetic differentiation of human mesenchymal stem cells |
|
9 |
Y. Förster, C. Rentsch, W. Schneiders, R. Bernhardt, J. C. Simon, H. Worch, S. Rammelt: Surface modification of implants in long bone. |
|
8 |
B. Rentsch, R. Bernhardt, D. Scharnweber, W. Schneiders, S. Rammelt, C. Rentsch: Embroidered and surface coated polycaprolactone-co-lactide scaffolds: A potential graft for bone tissue engineering. |
|
7 |
C. Rentsch, B. Rentsch, D. Scharnweber, H. Zwipp, S. Rammelt: Knochenersatz: Transplantate und Ersatzmaterialien – ein Update. |
|
6 |
S. Knaack, A. Lode, A. Gabrielyan, A. Rösen-Wolff, M. Gelinsky: Ein neues Konzept für die Knochendefektheilung: Funktionalisierte Biomaterialien zur gerichteten Zellmigration. |
|
5 |
A. Ewald, Ch. Käppel, E. Vorndran, C. Moseke, M. Gelinsky, U. Gbureck: The effect of Cu(II) loaded brushite scaffolds on growth and activity of osteoblastic cells. |
|
4 |
Ch. Wu, W. Fan, Y. Zhou, Y. Luo, M. Gelinsky, J. Chang, Y. Xiao: 3D-Printing of highly uniform β-CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis. |
|
3 |
A. Walther, B. Hoyer, A. Springer, B. Mrozik, Th. Hanke, Ch. Cherif, M. Gelinsky: Novel textile scaffolds generated by flock technology for tissue engineering of bone and cartilage. |
|
2 |
B. Hoyer, A. Bernhardt, S. Heinemann, I. Stachel, M. Meyer, M. Gelinsky: Biomimetically mineralized salmon collagen scaffolds for application in bone tissue engineering. |
|
1 |
M. Matyash, F. Despang, R. Mandal, D. Fiore, M. Gelinsky, Ch. Ikonomidou: Novel alginate hydrogel strongly supports neurite growth and protects neurons against oxidative stress. |
2011
|
17 |
S. Fickert, U. Schröter-Bobsin, A.F. Gross, U. Hempel, C. Wojciechowski, C. Rentsch, D. Corbeil, K. P. Günther: Human mesenchymal stem cell proliferation and osteogenic differentiation during long-term ex vivo cultivation is not age dependent. |
|
16 |
A. Bernhardt, A. Lode, F. Peters, M. Gelinsky: Optimization of culture conditions for osteogenically-induced mesenchymal stem cells in β-tricalcium phosphate ceramics with large interconnected channels |
|
15 |
Ch. Wu, W. Fan, M. Gelinsky, Y. Xiao, J. Chang, Th. Friis, G. Cuniberti: In situ preparation and proteindelivery of silicate–alginate composite microspheres with core-shell structure. |
|
14 |
Ch. Wu, W. Fan, Y. Zhu, M. Gelinsky, J. Chang, G. Cuniberti, X. Albrecht, T. Friis, Y. Xiao: Multifunctional magnetic mesoporous bioactive glass scaffolds with a hierarchical pore structure. |
|
13 |
S. Heinemann, M. Gelinsky, H. Worch, Th. Hanke: Resorbierbare Knochenersatzmaterialien - eine Übersicht kommerziell verfügbarer Werkstoffe und neuer Forschungsansätze auf dem Gebiet der Komposite. |
|
12 |
M. Nienhuijs, X. F. Walboomers, M. Gelinsky, P. J. Stoelinga, J. Jansen: The evaluation of mineralized collagen as a carrier for the osteoinductive material COLLOSS E in vivo. |
|
11 |
J. Rauh, F. Milan, K.P. Günther, M. Stiehler: Bioreactor systems for bone tissue engineering |
|
10 |
F. Despang, R. Dittrich, M. Gelinsky: Novel biomaterials with parallel aligned pore channels by directed ionotropic gelation of alginate: Mimicking the anisotropic structure of bone tissue. |
|
9 |
A. Bernhardt, A. Lode, F. Peters, M. Gelinsky: Novel ceramic bone replacement material Osbone in a comparative in vitro study with osteoblasts. |
|
8 |
Ch. Wu, Y. Luo, G. Cuniberti, Y. Xiao, M. Gelinsky: 3D-Printing of hierarchical and tough mesoporous bioactive glass scaffolds with controllable pore architecture, excellent mechanical strength and mineralization ability. |
|
7 |
R. Ummethala , F. Despang, M. Gelinsky, B. Basu: In vitro corrosion and mineralization of novel Ti-Si-C alloy. |
|
6 |
R. Dittrich, F. Despang, A. Bernhardt, M. Gelinsky: Hartgewebeersatz - Poröse Scaffolds durch ionotrope Gelbildung. |
|
5 |
M. Gelinsky, A. Lode, A. Bernhardt, A. Rösen-Wolff: Stem cell engineering for regeneration of bone tissue. |
|
4 |
Ch. Wu, M. Gelinsky, Y. Xiao, P. Simon, R. Schulze, Th. Doert, Y. Luo, G. Cuniberti: Bioactive SrO-SiO2 glass with well-ordered mesopores: characterization, physiochemistry and biological properties. |
|
3 |
W. Busch, S. Bastian, U. Trahorsch, M. Iwe, D. Kühnel, T. Meißner, A. Springer, M. Gelinsky, V. Richter, Ch. Ikonomidou, A. Potthoff, I. Lehmann, K. Schirmer: Internalisation of engineered nanoparticles into mammalian cells in vitro: influence of cell type and particle properties. |
|
2 |
L. Offer, B. Veigel, Th. Pavlidis, Ch. Heiss, M. Gelinsky, A. Reinstorf, B. Nies, S. Wenisch, K. S. Lips, R. Schnettler: Phosphoserine-modified calcium phosphate cements: bioresorption and substitution. |
|
1 |
Ch. Landsberg, F. Stenger, A. Deutsch, M. Gelinsky, A. Rösen-Wolff, A. Voigt: Chemotaxis of mesenchymal stem cells within 3D biomimetic scaffolds - a modeling approach. |
2010
|
20 |
P. Kasten, H. Zwipp, K.P. Günther: Was gibt es Neues bei den rechtlichen Rahmenbedingungen in der klinischen Stammzelltherapie bei muskuloskeletalen Erkrankungen? |
|
19 |
M. Stiehler, F.P. Seib, J. Rauh, A. Goedecke, C. Werner, M. Bornhäuser, K.P. Günther, P. Bernstein: Cancellous bone allograft seeded with human mesenchymal stromal cells: a potential good manufacturing practice-grade tool for the regeneration of bone defects. |
|
18 |
T. Schönberger, P. Kasten, K. Fechner, N.P. Südkamp, S. Pearce, P. Niemeyer: Novel software-based and validated evaluation method for objective quantification of bone regeneration in experimental bone defects. |
|
17 |
P. Niemeyer, K. Fechner, S. Milz, W. Richter, N.P. Suedkamp, A.T. Mehlhorn, S. Pearce, P. Kasten: Comparison of mesenchymal stem cells from bone marrow and adipose tissue for bone regeneration in a critical size defect of the sheep tibia and the influence of platelet-rich plasma. |
|
16 |
P. Niemeyer, K. Szalay, R. Luginbühl, N.P. Südkamp, P. Kasten: Transplantation of human mesenchymal stem cells in a non-autogenous setting for bone regeneration in a rabbit critical-size defect model. |
|
15 |
P. Kasten, I. Beyen, D. Bormann, R. Luginbühl, F. Plöger, W. Richter: The effect of two point mutations in GDF-5 on ectopic bone formation in a beta-tricalciumphosphate scaffold. |
|
14 |
P. Kasten, P. Bernstein, A. Biewener, M. Bornhäuser, G. Duda, C. Gaissmaier, U. Nöth, B. Pfüller, |
|
13 |
P. Janicki, P. Kasten, K. Kleinschmidt, R. Luginbuehl, W. Richter: Chondrogenic pre-induction of human mesenchymal stem cells on beta-TCP: enhanced bone quality by endochondral heterotopic bone formation. |
|
12 |
P. Bernstein, C. Sticht, A. Jacobi, C. Liebers, S. Manthey, M. Stiehler: Expression pattern differences between osteoarthritic chondrocytes and mesenchymal stem cells during chondrogenic differentiation. |
|
11 |
C. Heinemann, S. Heinemann, A. Bernhardt, A. Lode, H. Worch, T. Hanke: In vitro osteoclastogenesis on textile chitosan scaffold. |
|
10 |
H. Ehrlich, P. Simon, W. Carrillo-Cabrera, V. V. Bazhenov, J. P. Botting, M. Ilan, A. V. Ereskovsky, G. Muricy, H. Worch, A. Mensch, R. Born, A. Springer, K. Kummer, D.V. Vyalikh, S. L. Molodtsov, D. Kurekj, M. Kammer, S. Paasch, E. Brunner: Insights into Chemistry of Biological Materials: Newly Discovered Silica-Aragonite-Chitin Biocomposites in Demosponges. |
|
9 |
H. Hildebrandt, D. Kühnel, A. Potthoff. K. Mackenzie, A. Springer, K. Schirmer: Evaluating the cytotoxicity of palladium/magnetite nano-catalysts intended for wastewater treatment. |
|
8 |
E. Steck, H. Bertram, A. Walther, K. Brohm, B. Mrozik, M. Rathmann, Ch. Merle, M. Gelinsky, W. Richter: Enhanced biochemical and biomechanical properties of scaffolds generated by flock technology for cartilage tissue engineering. |
|
7 |
C. Vater, A. Lode, A. Bernhardt, A. Reinstorf, B. Nies, M. Gelinsky: Modifications of a calcium phosphate cement with biomolecules - influence on nanostructure, material and biological properties. |
|
6 |
A. Bernhardt, S. Thieme, H. Domaschke, A. Springer, A. Rösen-Wolff, M. Gelinsky: Crosstalk of osteoblast and osteoclast precursors on mineralised collagen - towards an in vitro model for bone-remodelling. |
|
5 |
A. Bernhardt, A. Lode, S. S. Babu, A. Vogel, Th. Hanke, S. Thieme, H. K. Varma, A. Rösen-Wolff, M. Gelinsky, A. John: In vitro characterisation of bone cell activity on triphasic ceramic composites from calcium silicate, beta-tricalciumphosphate and hydroxyapatite. |
|
4 |
F. Peters, A. Bernhardt, A. Lode, M. Gelinsky: OsBone - eine neue, synthetische Biokeramik für den Knochenersatz. |
|
3 |
M. Scholz, P. Schleicher, T. Eindorf, F. Friedersdorf, M. Gelinsky, U. König, A. Sewing, N. P. Haas, F. Kandziora: Cages augmented with mineralized collagen and platelet rich plasma as an osteoconductive/-inductive combination for interbody fusion. |
|
2 |
C. Vater, A. Lode, A. Bernhardt, A. Reinstorf, C. Heinemann, M. Gelinsky: Influence of different modifications of a calcium phosphate bone cement on adhesion, proliferation and osteogenic differentiation of human bone marrow stromal cells. |
|
1 |
F. Despang, A. Bernhardt, A. Lode, Th. Hanke, D. Handtrack, B. Kieback, M. Gelinsky: Response of human bone marrow stromal cells to a novel ultra-fine grained and dispersion strengthened titanium-based material. |