Research output

2020

• A comprehensive modelling approach of fatigue induced cracking in carbon fibre reinforced laminates at different stress ratiosJust, G., Koch, I. & Gude, M., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• A correlation approach between altering modal properties of gradually-damaged composite rotors and resulting dynamic response sequencesNguyen, M., Langkamp, A., Gude, M. & Filippatos, A., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryElectronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Automatisierte Shearografie: Zerstörungsfreie Prüfung mittels automatisierter Shearografie zur bedienerunabhängigen Fehlerdetektion in FaserverbundkunststoffenPfeffer, P., Düreth, C., Schober, G., Just, G., Koch, I., Jäger, H., Hochrein, T. & 1 others, 2020, Düren: Shaker Verlag, 90 p., (SKZ - Forschung und Entwicklung)Research output: Book/Report/Anthology > Monograph
• Beugungsgitterbasierte Schädigungs-, Eigenfrequenz- und Eigenformmessung an schnelldrehenden FaserverbundrotorenLich, J., Wollmann, T., Zhang, H., Kuschmierz, R., Filippatos, A., Gude, M. & Czarske, J., 2020Research output: Contribution to conferences > Abstract
• Combined experimental-numerical approach for the 3D vibration analysis of rotating composite compressor blades: An introductionWollmann, T., Dannemann, M., Langkamp, A., Modler, N., Gude, M., Salles, L., Hoffmann, N. & 1 others, 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Compression sensing using fragmented carbon fibers by means of plastic deformations in partially cured epoxy matrixHöhne, R., Müller, M. & Modler, N., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Deformation and failure of multi-layered fibre-metal laminates subjected to highly dynamic loading conditionsRichter, J., Wiegand, J., Kuhtz, M., Hornig, A. & Gude, M., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Design and development of an active wheelchair with improved lifting kinematics using CFRP-compliant elementsEhrig, T., Koschichow, R., Dannemann, M., Modler, N. & Filippatos, A., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Design and manufacturing of novel thermoplastic CFRP rods for carbon concrete compositesWohlfahrt, D., Thieme, M., Böhm, R. & Gude, M., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Effect of processing parameters on quality and strength in thermoplastic composite injection overmoulded componentsValverde, M. A., Kupfer, R., Kawashita, L. F., Gude, M. & Hallett, S. R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Electro-mechanical test rigs for analysing impact induced wave propagation in composite materialsNitschke, S., Hornig, A. & Gude, M., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Entwicklung von flächigen Metall-FKV-Übergangsstrukturen für den MultimaterialleichtbauSennewald, C., Cherif, C., Hoffmann, G., Jäger, H. & Weck, D., 2020, Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 100 p., (EFB-Forschungsberichte; vol. 535)Electronic (full-text) versionResearch output: Book/Report/Anthology > Monograph
• Experimental analysis of draping process generated material imperfections in textile preformsBöhm, R., Kunze, E., Geller, S. & Gude, M., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Experimental and numerical studies on the deformation of a flexible wire in an injection moulding processKöhler, D., Gröger, B., Kupfer, R., Hornig, A. & Gude, M., 2020, In:  Procedia manufacturing. 47, p. 940-947, 8 p.Electronic (full-text) versionResearch output: Contribution to journal > Conference article
• Experimental investigation of the load bearing capacity of inserts embedded in thermoplastic compositesTroschitz, J., Kupfer, R. & Gude, M., 2020, Proceedings 4th International Conference Hybrid Materials and Structures 2020 . Hausmann, J. M., Siebert, M., von Hehl, A. & Weidenmann, K. A. (eds.). DGM - Deutsche Gesellschaft für Materialkunde e.V., p. 249-254, 6 p.Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Forming analysis of internal plies of multi-layer unidirectional textile preforms using projectional radiographyKunze, E., Schwarz, B., Weber, T., Müller, M., Böhm, R. & Gude, M., 2020, In:  Procedia manufacturing. 47, p. 17-23, 7 p.Electronic (full-text) versionResearch output: Contribution to journal > Conference article
• Gradual damage behaviour of polar orthotropic glass-fibre reinforced epoxy rotors: Experimental and simulation analysisFilippatos, A., Langkamp, A., Kostka, P., Koch, I., Böhm, R. & Gude, M., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Hierarchical carbon fibre reinforced plastics with tailored nanoparticle modification - Benefits and limitationsFiedler, B., Leopold, C., Just, G., Koch, I. & Gude, M., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Hybrid fibre reinforced thermoplastic hollow structures with a multi-scale structured metal load introduction elementWürfel, V., Grützner, R., Hirsch, F., Barfuß, D., Kästner, M. & Gude, M., 2020, Proceedings 4th International Conference Hybrid Materials and Structures 2020 . Hausmann, J. M., Siebert, M., von Hehl, A. & Weidenmann, K. A. (eds.). DGM - Deutsche Gesellschaft für Materialkunde e.V., p. 138-143, 6 p.Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Increasing the joint strength of ultrasonic spot-welded fiber-reinforced laminates by an innovative process control methodTutunjian, S., Eroglu, O., Dannemann, M., Modler, N. & Fischer, F., 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• In-situ load-monitoring of CFRP components using integrated carbon rovings as strain sensorsHaentzsche, E., Nocke, A., Onggar, T., Hund, R., Cherif, C., Weißenborn, O., Geller, S. & 1 others, 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Interlaminar shear strength enhancement under out-of-plane compression of fabric reinforcements - A review on meso and macro scaleDüreth, C., Weck, D., Böhm, R., Thieme, M., Gude, M., Wolf, C., Henkel, S. & 1 others, 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics LaboratoryResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Joining of thermoplastic composites with metals using resistance element weldingTroschitz, J., Vorderbrüggen, J., Kupfer, R., Gude, M. & Meschut, G., 2020, In: Applied Sciences (Switzerland). 10, 20, 7251Electronic (full-text) versionResearch output: Contribution to journal > Research article
• Lastangepasste Generierung von irregulären Gitterstrukturen auf Basis von Voronoi-DiagrammenHoltzhausen, S., Birke, M., Koch, P., Blei, R., Stelzer, R. & Gude, M., 2020, Konstruktion für die Additive Fertigung 2019. Lachmayer, R., Rettschlag, K. & Kaierle, S. (eds.). Springer Verlag, p. 93-103, 11 p.Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
• Masterplan Exzellenz im Leichtbau: Potentiale des Leichtbaus in Wissenschaft und Wirtschaft in SachsenKawalla, R., Prahl, U., Jäger, H., Kroll, L., Moses, M., Ullmann, M., Stegelmann, M. & 6 others, 2020, Dresden: Technische Universität Dresden, 40 p.Research output: Book/Report/Anthology > Monograph