Staff
Head of the Chair
© .
Prof. Dr.-Ing. habil. Jürgen Czarske
Lehrstuhlinhaber
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 22, Anmeldung BAR 23
01069 Dresden
- work Tel.
- +49 351 463-34803
- fax Fax
- +49 351 463-37716
Juergen Czarske (Fellow OSA, SPIE, EOS) is full professor, director and senator of the TU Dresden, Germany. He studied electrical engineering and physics and obtained his PhD degree and the Venia Legendi from Leibniz University of Hannover, Germany. From 1986 to 1991 he was funded with a scholarship of the company Siemens AG and worked in their research and development laboratories in Munich. From 1991 to 1996 he was employed as scientific member and assistant of the professor at the Leibniz University. From 1995 to 2004 he was as Postdoc responsible for the metrology development in the Laser Center Hannover (LZH e.V.). As visiting scholar he has conducted research in Japan (NTT) and USA (MIT, Bell Labs, Stanford, Virginia Tech, NASA, CalTech) from 1996 to 2001. Since 2004 he is C4 professor based at TU Dresden. Since January 2016, Prof. Czarske is Director of Institute of Circuits and Systems. His awards include the 1996 AHMT Measurement Technique Prize, a 2008 international Berthold Leibinger Innovation Prize, a 2014 Reinhart Koselleck Project of German Research Foundation and the 2019 Joseph Fraunhofer Award and Robert M. Burley Prize of The Optical Society (OSA), recognizing research accomplishments in optical engineering. Prof. Czarske is associate editor of Journal of the European Optical Society-Rapid Publications, elected member of Saxon Academy of Science in Leipzig, the Scientific Society for Laser Technology (WLT) and board member of German Society of Applied Optics (DGaO) and German Association of Laser Anemometry (GALA), as well as advisor of Student Chapter Dresden of SPIE. Prof. Czarske has conducted more than 800 talks and papers, especially about 200 papers in peer-reviewed journals, over 100 invited talks and he holds over 20 patents. Prof. Czarske is Life Fellow of OSA and SPIE, Fellow of EOS and senior member of IEEE. Together with his employees and students he has formed the laboratory MST to a renowned institution for computational laser and ultrasound-based measurement systems. Over 60 scientific prizes and honors have been awarded to students and employees of the laboratory.
Administration
© .
Jessica Matzke
Sekretariat
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 23
01069 Dresden
Germany
- work Tel.
- +49 351 463-39808
- fax Fax
- +49 351 463-37716
Office Hours:
- Monday:
- 08:15 - 10:15
- Tuesday:
- 08:15 - 10:15
- Wednesday:
- 08:15 - 10:15
Research Assistants
© TU Dresden
M. Sc. Florian Bürkle
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 28
01069 Dresden
- work Tel.
- +49 351 463-36185
- fax Fax
- +49 351 463-37716
Florian Bürkle studied physics at the Goethe University Frankfurt and earned his master in 2018. Since October 2018 he is PhD student at the MST working on high resolution measurements with the laser Doppler velocity profile sensor (LD-PS). His research focuses on micro-scale flows like in fuel cells or high gradient flows close to walls. Furthermore, simultaneous high precision temperature and velocity profile measurements are a topic of research.
© .
Dr. rer. nat. Lars Büttner
Abteilungsleiter Laser- und Ultraschallmesstechnik
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 28
01069 Dresden
- work Tel.
- +49 351 463-35314
- fax Fax
- +49 351 463-37716
Lars Büttner studied physics at Clausthal University of Technology, Clausthal-Zellerfeld, Germany. Since 1999, he was a Research Fellow with the Laser Zentrum Hannover, Germany. He received the Ph.D. degree in physics from Leibniz Universität Hannover, in 2004. Since 2005, he has been with Technische Universität Dresden, Dresden, Germany, where he is currently the Head of the Flow Measurement Group at the Laboratory for Measurement and Sensor System Techniques. His current research interests include laser- and ultrasound-based measurement techniques and adaptive optical systems.
© Luca Steinweg
Dipl.-Ing. Lars Grüter
Wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR I56C
01069 Dresden
Germany
- work Tel.
- +49 351 463-36188
- fax Fax
- +49 351 463-37716
Lars Grüter studied electrical engineering at the TU Dresden and received his Diploma in 2020. Since then he is a PhD student and research assistant looking into new methods for ultrasound imaging in opaque and difficult to access media such as liquid metals or the human skull. His research interests include image and signal processing in general as well as its medical application and advancements of Python's scientific ecosystem. He develops and maintains the command line tool PtvPy for the laboratory.
© .
Dipl.-Ing. Johannes Gürtler
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 116
01062 Dresden
- work Tel.
- +49 351 463-34860
- fax Fax
- +49 351 463-37716
Education
- Diploma in Electrical Engineering at TU Dresden (2015)
- Ph. D. student at MST since 2015
Research interests
- Imaging laser measruments systems for fluid mechanics
- High-speed camera-techniques
© TU Dresden
Dr.-Ing. Nektarios Koukourakis
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, ´
01069 Dresden
- work Tel.
- +49 351 463-42256
- fax Fax
- +49 351 463-37716
Nektarios Koukourakis studied electrical engineering at the Ruhr-University in Bochum, where he also received his Ph.D. in 2012. Since 2013 he has been a research fellow at the Laboratory for Measurement and Sensor System Techniques, where he became head of the biophotonics group in 2016. His current research interests include quantitative phase imaging, holography, wavefront shaping, computational and adaptive microscopy, lensless endoscopy and fiber based optical communication.
Dipl.-Ing. Benedikt Krug
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 24
01069 Dresden
- work Tel.
- +49 351 436-32938
- fax Fax
- +49 351 463-37716
Benedikt Krug received a diploma degree in electrical engineering from Technische Universität Dresden in 2018 and was supported by the German Academic Scholarship Foundation. Since 2019 he has been working as a member of the research staff and PhD student at the Chair of Measurement and Sensor System Technique. His field of research is the optical high-resolution measurement of mechanical properties for biomedical applications using Brillouin techniques. He received the study award of the SEW-Eurodrive Foundation as well as the Johannes-Görges-Prize for his work.
© .
Dr.-Ing. Robert Kuschmierz
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 25
01069 Dresden
- work Tel.
- +49 351 463-36192
- fax Fax
- +49 351 463-37716
Robert Kuschmierz studied at TU Dresden. Since 2012, he is a Research Fellow with the Laboratory for Measurement and Sensor System Techniques. He received his Ph.D. in electrical engineering from TU Dresden, in 2017. For his Ph.D. thesis he received the measurement technique award from the company SICK and the award for outstanding dissertations from the Dr.- Ing. Siegfried Werth Foundation. Since 2017, he is Head of the optical process metrology group at the Laboratory for Measurement and Sensor System Techniques. His current research interests include interferometry, holography and wavefront shaping for measurements at rotating machinery, sound-flow interaction, flame characterization as well as for lensless endoscopy.
© TU Dresden
M. Sc. Julian Lich
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR I57 Helmholtzstr. 18
01069 Dresden
Germany
- work Tel.
- +49 351 463-33455
- fax Fax
- +49 351 463-37716
Julian Lich received a double master’s degree in mechanical engineering at the TU Ilmenau and the Pontificial Catholic University of Peru in 2017. Since then, he works as a PhD student at MST on optical methods to measure the structure dynamic behaviour of rotating structures at high rotational speeds. His current research interests include diffraction grating based deformation measurements and digital image correlation.
© Felix Schmieder
Dipl.-Ing. Richard Nauber
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 27
01069 Dresden
- work Tel.
- +49 351 463-39811
- fax Fax
- +49 351 463-37716
Richard Nauber received a Diploma degree in mechatronics from the TU
Dresden in 2010 and worked as embedded software developer for a
renewable energy company afterwards. Since 2012 he is a research fellow
with the laboratory for measurement and sensor system techniques,
currently as head of the ultrasound metrology group. Mr. Nauber received
the UBERTONE student paper award in 2012. His current research interests
include the development and application of ultrasound-based imaging
techniques with adaptive sound field.
© TU Dresden
Dipl.-Ing. Stefan Rothe
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 26
01069 Dresden
- work Tel.
- +49 351 463-32417
- fax Fax
- +49 351 463-37716
Stefan received a Diploma degree in electrical engineering from the TU Dresden in 2018. Since then Stefan is part of the Biophotonics Group led by Dr. Koukourakis. His research focuses on methods for computational imaging such as digital holography or machine learning based approaches. In this context, concepts for adaptive wavefront shaping with spatial light modulators such as phase-only SLMs or digital micromirror devices are applied. The research contents are mainly used to investigate novel communication and security technologies in fiber-based communication networks. Since 2019 Stefan is president of the SPIE student chapter at TU Dresden.
© TU Dresden
Dipl.-Ing. Oliver Rothkamm
Wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
- work Tel.
- +49 351 463-35282
- fax Fax
- +49 351 463-37716
Study:·
- Diploma in Electrical Engineering, TU Dresden (2020)
- Profiles: Automation, measurement and control engineering
- Internship: Fraunhofer IWU in the department of technical acoustics
Fields of research:·
- Tomography
- Laser Interferometric Vibrometry
- Measurement of acoustic parameters by laser
Dipl.-Ing. Elias Scharf
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 116
01069 Dresden
Germany
- work Tel.
- +49 351 463-35303
- fax Fax
- +49 351 463-37716
Academic studies:
- Studied Mechatronics at TU Dresden and received his Diploma in 2018
profile: micro-, macro- and vehicle mechatronics (including modules of biomedical engineering) - Internship in QUARZ-laboratory of Solar Research of the German Aerospace Centre (Deutsches Zentrum für Luft- und Raumfahrt e.V.) in Cologne (2017)
Development of measurement methods and test benches for component solar thermal power plants and implementation of measurement campaigns for industry - Semester abroad, École Centrale de Marseille in France (2015)
profile: MECAnique Génie Mer (Maritime Engineering)
Field of activity:
- microoptical system integration
- wavefront shaping for optical imaging systems
- application of microoptics in biomedical engineering
M. Sc. Katharina Schmidt
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 27
01069 Dresden
Germany
- work Tel.
- +49 351 463-39809
- fax Fax
- +49 351 463-37716
Katharina Schmidt completed undergraduate studies in mechanical engineering at TU Dortmund and Kasetsart University (Bangkok, Thailand) in 2018. Afterwards she recieved a master degree in mechanical engineering from the RWTH Aachen in 2020, her focus in studies were biomedical and control engineering. Since October 2020 she is a PhD student at MST. Her research interests include aberration correction with adaptive optics, confocal microscopy and methods of machine learning.
© Felix Schmieder
Dipl.-Phys. Felix Schmieder
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 25
01069 Dresden
- work Tel.
- +49 351 463-33894
- fax Fax
- +49 351 463-37716
Felix Schmieder studied physics at TU Chemnitz and received his diploma in 2013. Since then, he has been an employee and PhD student at MST, working in the fields of laser flow metrology, laser ultrasonics and optogenetics. His current research interests are in holography, computer-generated holograms and neuronal network connectivity analysis.
© TU Dresden
Mr M.Sc. Jiawei Sun
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR 24
01069 Dresden
Germany
- work Tel.
- +49 351 463-32116
- fax Fax
- +49 351 463-37716
Education:
- Bachelor in Information engineering at Northwestern Polytechnical University, China (2016)
- Master of Science in Lasers and Photonics with specialization in quantitative phase imaging at Ruhr-University Bochum (2019)
- Ph.D. student at MST since 2019
Research interests:
- Holography and quantitative phase imaging
- Fiber optics
- Adaptive and computational microscopy
© TU Dresden
Wenjie Wang Gastwissenschaftlerin
Gastwissenschaftlerin
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, I56D
01069 Dresden
Germany
- work Tel.
- +49 351 463-34051
- fax Fax
- +49 351 463-37716
Wenjie Wang received a Master degree in the field of computational electromagnetics from Anhui University in China in 2017. She received Chinese Scholarship Council (CSC) scholarship in 2017. Since November of 2017, she is a PhD student with the laboratory for measurement and sensor system techniques. Her current research interests include the development and application of adaptive lenses and prisms, 3D scanning microscopy and quantitative phase imaging field.
David Weik Dipl.-Ing.
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR I56C
01069 Dresden
Germany
- work Tel.
- +49 351 463-36078
- fax Fax
- +49 351 463-37716
David Weik received a Diploma degree in electrical engineering from the Dresden University of Technology in 2017. Afterwards, he worked in the Fraunhofer Institute for Machine Tools and Forming Technology IWU, Dresden, in the field of life science, especially in the development of tactile surgical instruments. Since 2019, he is a research fellow with the laboratory for measurement and sensor system techniques and member of the ultrasound metrology group. His research currently focusses on ultrasound imaging techniques in turbulent liquid metal flows. This work involves the application of adaptive sound field shaping by using phased array ultrasonic transducers and advanced signal processing.
© TU Dresden
Qian Zhang Dipl.-Ing.
wissenschaftlicher Mitarbeiter
Send encrypted mail via the SecureMail portal (for TUD external users only).
Büro:
Barkhausenbau, BAR I57
01069 Dresden
Germany
- work Tel.
- +49 351 463-33360
- fax Fax
- +49 351 463-37716
Qian received a Diploma degree in Electrical Engineering from the TU Dresden in 2020. Since then he has been a PhD student at the Laboratory for Measurement and Sensor System Techniques. His research focuses on the application of artificial intelligence in optical measurement systems. With his computer-based approaches, Qian aims to contribute to more cost-effective and efficient measurement systems by replacing the use of conventional components in modern measurement systems with intelligent algorithms. His research interests include deep learning, physical layer security in optical waveguides or adaptive optics.
Student staff
© TU Dresden
Volker Maurer has been studying electrical engineering at the TU Dresden since 2012, specializing in automation, measurement and control engineering. At the beginning of 2020, he started writing his diploma thesis at the Chair of Measurement and Sensor Systems Technology, in the field of imaging ultrasound measurement techniques.
Many thanks for the great collaboration to our...
|
Bayer, Christian |
|
Bermuske, Mike |
|
Burger, Markus |
|
Döring, André |
|
Dreier, Florian |
|
Fischer, Andreas; Prof. Dr. habil. |
|
Franke, Sven |
|
Göhlert, Sandy |
|
Günther, Philipp; Dr.-Ing. |
|
Haufe, Daniel; Dr.-Ing. |
|
Klaucke, Carsten |
|
König, Jörg; Dr.-Ing. |
|
Kupsch, Christian; Dr.-Ing. |
|
Leithold, Christoph |
|
Lenz, Michael; Dr.-Ing. |
|
Leuterer, Hellmut; Dr.-Ing. |
|
Linde, Christian |
|
Mäder; Kevin Naumann, Alena |
|
Neumann, Mathias; Dr.-Ing. |
|
Pfister, Thorsten, Dr. |
|
Philipp, Katrin; Dr.-Ing. |
|
Pohle, Bianka |
| Radner, Hannes, |
|
Ramos, Andrés |
|
Schlüßler, Raimund; Dr. Ing. |
|
Schober, Christian |
|
Shi, Shengyu, Dr. |
|
Shirai, Katsuaki; Prof. Dr. |
|
Teich, Martin; Dr.-Ing. |
|
Thieme, Norman |
|
Voigt, Andreas; Dr.-Ing. |