Stitch Bonding Machines

Technical Data	Features
Working width: 100 inches	Manufacture of textile concrete reinforcements from very coarse carbon filament yarns Use of heavy-tow-carbon fibers with a yarn count of 3300 tex modular setup for simplified expansion of additional functional units equipped with an coating and drier unit (manufacturer: COATEMA Coating Machinery GmbH / Heraeus Noblelight GmbH) for aqueous polymer dispersions based on thermo- and duroplasts, respectively Coating of multiaxial structures is implemented by means of the kiss coating principle

Technical Data

Features

Manufacture of textile concrete reinforcements from very coarse carbon filament yarns
Use of heavy-tow-carbon fibers with a yarn count of 3300 tex
modular setup for simplified expansion of additional functional units
equipped with an coating and drier unit (manufacturer: COATEMA Coating Machinery GmbH / Heraeus Noblelight GmbH) for aqueous polymer dispersions based on thermo- and duroplasts, respectively
Coating of multiaxial structures is implemented by means of the kiss coating principle

Technical Data	Features
Working width: 800 to 1,500 mm (adjustable) Machine gauges 7F / 10F / 18F Stitch lengths between 0.5 and 5 mm electronically controlled sewing thread insertion by EBA 2 guide rails, cam disk offset Working speeds of up to 1,400 rpm	Manufacture of biaxial non-crimp fabrics stitch-oriented reinforcement thread insertion production of dense as well as open, latticed fabrics integrated cutting device for separation into several individual lengths Reinforcement thread insertion adapted to the use of carbon Coarse threads (up to 10,000 tex) processable

Technical Data	Features
Working width: 1,250mm Machine gauges: 7F / 10F / 12F / 14F Four insertion systems for the arrangement of thread layers in angles of 0° (working direction), 90° (transversely to working direction), and steplessly in angles between +/- 45 ° and 90° Stitch lengths between 0.5 and 5 mm electronically controlled sewing thread insertion by EBA 2 guide rails, cam disk offset Working speeds of up to 1,400 rpm	Manufacture of multiaxial non-crimp fabrics and composite structures stretched and parallel alignment of a thread layer's individual threads flexible with regard to the order of thread layers, thread materials and thread densities Tangential creel with supply drive and thread storage for the processing of carbon fibers integrating coating unit with infrared dryer for the processing of aqueous dispersions

Technical Data

Features

Working width: 1,250mm
Machine gauges: 7F / 10F / 12F / 14F
Four insertion systems for the arrangement of thread layers in angles of 0° (working direction), 90° (transversely to working direction), and steplessly in angles between +/- 45 ° and 90°
Stitch lengths between 0.5 and 5 mm
electronically controlled sewing thread insertion by EBA
2 guide rails, cam disk offset
Working speeds of up to 1,400 rpm

Manufacture of multiaxial non-crimp fabrics and composite structures
stretched and parallel alignment of a thread layer's individual threads
flexible with regard to the order of thread layers, thread materials and thread densities
Tangential creel with supply drive and thread storage for the processing of carbon fibers
integrating coating unit with infrared dryer for the processing of aqueous dispersions

About this page