Skip to main navigation
Skip to secondary navigation
Skip to search
Skip to content

Scientists processing machines and processing technology

Porträtfoto von Professor Jens-Peter Majschak

Prof. Dr.-Ing. Jens-Peter Majschak

Send email

work

Visiting address:

Hauptgebäude ZIN, ZIN 103 Bergstr. 120

01069 Dresden

postal

Postal address:

TUD Dresden University of Technology Fakultät Maschinenwesen
Institut für Naturstofftechnik

01062 Dresden

work Tel.
work Tel.

Sekretariat: Heidelinde Siegert

more details

Barteld, Oleg; Dipl.-Ing.

Platzhalter für Portraitbild

Cleaning Technologies

Dipl.-Ing. Oleg Barteld

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 221 Bergstr. 120

01069 Dresden

Deutschland

work Tel.

Research Focus

characterization and modelling of soil properties under cleaning conditions

Publications

The FIS cannot provide any results for the selected parameters.

Berthold, Lena; Dipl.-Ing.

Foto: Porträt Lena Berthold

Processing Systems

Dipl.-Ing. Lena Berthold

Forming of Fibre Based Materials

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, room 224 Bergstraße 120

01069 Dresden

Deutschland

work Tel.

Research

3D-Forming of fibre based materials
project Commisioning of Intelligent Production Systems
project InfraKart: Moisture measurement with organic infrared detectors to control paperboard processing machines
humidification and absorption behaviour of paperboard materials

Publications

4 Entries

2024

3D-Forming of Extruded Seaweed FilmRosenbusch, P., Berthold, L. & Schmidtchen, L., 27 May 2024Electronic (full-text) versionResearch output: Contribution to conferences > Poster
Sprühbare Barriereschichten für Karton auf Basis von Polyvinylakohol und mikrokristalliner CelluloseJanßen, H. C., Berthold, L., Schubert, H., Blumrich, J. & Fischer, S., 21 Mar 2024, VVD 2024 Verarbeitungsmaschinen und Verpackungstechnik: Tagungsband : Herausforderung Komplexität. Dresden: Technische Universität Dresden, p. 253-264Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Role of Blank Moisturisation in Press Forming of PaperboardBerthold, L., Niini, A., Leminen, V. & Majschak, J., 19 Feb 2024, In: BioResources. 19, 2, p. 2272-2285, 14 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2022

Effect of Blank Moisture Content on Forming Behaviour and Mechanical Properties of Paperboard Tray PackagesNiini, A., Berthold, L., Müller, T., Tanninen, P., Majschak, J., Varis, J. & Leminen, V., 2022, In: Journal of Applied Packaging Research. 2022, 1, 4Electronic (full-text) versionResearch output: Contribution to journal > Research article

Britzke, Max; Dr.-Ing. Dipl.-Wi.-Ing.

Platzhalter für Portraitbild

Processing Systems

Dr.-Ing. Dipl.-Wi.-Ing. Max Britzke

Research Field Coordinator

Send email

Chair of Processing Machines and Processing Technology

work

Visiting address:

Hauptgebäude ZIN, ZIN 222 Bergstraße 120

01069 Dresden

work Tel.

Publications

1 bis 28 von 28 Einträgen

Britzke, Max; Rosenbusch, Phillip: Adhesive free paper honeycomb core and related manufacturing process for use in environmentally friendly sandwich panels. In: International Panel Products Symposium (IPPS) 2019 proceedings (2019)

Britzke, Max; Rosenbusch, Phillip: Neuartige, klebstofffreie Papierwabenstruktur. In: Tagungsunterlagen zum IGEL-Leichtbausymposium 2019 (2019)

Britzke, M.; Herold, J.; Lippitsch, S.: Aktuelle Prüfmethoden für moderne Leichtbauwerkstoffe im Möbel- und Innenausbau. In: holztechnologie 56 (2015), Nr. 1, S. 45–50

Britzke, M.; Herold, J.; Korn, C.; Wagenführ, A.: Development of a 3D formable wood based material (Holzformblech). In: Proceedings of the 10th International Conference “Wood Science and Engineering in the Third Millennium” (ICWSE 2015), Brasov, Rumänien, 05.-07.11.2015 (2015)

Britzke, M.; Herold, J.; Lippitsch, S.: Aktuelle Bearbeitungstechnologien und Prüfmethode für moderne Leichtbauwerkstoffe im Möbel- und Innenausbau. In: Tagungsband 16. Holztechnologisches Kolloquium Dresden (2014)

Herzberg, M.; Britzke, M.; Herold, J.; Korn, C.; Lippitsch, S.: Three-dimensional Formable Paper Honeycomb Core for Lightweight Sand-wich Parts. In: Tagungsband Think Light – International Conference on Lightweight Panels, Hannover (2013)

Herold, J.; Britzke, M.; Lippitsch, S.; Wagenführ, A.: Möbelkonstruktion in Leichtbauweise optimieren – Teil 3: Neue Prüfmethoden zur Bewertung lokaler Eigenschaften von Sandwichplatten. In: Holz-Zentralblatt 139 (2013), Nr. 8, S. 205–206

Herold, J.; Britzke, M.; Wagenführ, A.: Möbelkonstruktion in Leichtbauweise optimieren – Teil 2: Werkstoffanalyse von Sandwichplatten bei lokaler Beanspruchung. In: Holz-Zentralblatt 139 (2013), Nr. 4, S. 108

Herold, J.; Britzke, M.; Wagenführ, A.: Möbelkonstruktion in Leichtbauweise optimieren – Teil 1: Untersuchung der Schnittstelle zwischen Werkstoff und Beschlag – Stand der Technik. In: Holz-Zentralblatt 139 (2013), Nr. 2, S. 55–56

Britzke, M.; Lippitsch, S.; Korn, C.; Wagenführ, A.: Entwicklung eines Verfahrens zur Herstellung 3D-formbarer Wabenkerne als Mittellage für Sandwichverbundbauteile. In: Tagungsband des 10. IHD-Holzwerkstoffkolloquium „Innovationen binden – Wert statt Wachstum“ (2013)

Britzke, Max; Herold, Jan; Wagenführ, André: Anforderungen an die Verklebung leichter Möbel-Sandwichplatten. In: Tagungsband des Kooperationsforum „Kleben von Holz und Holzwerkstoffen“, Juliusspital Würzburg (2012)

Beck, Curt; Korn, Christian; Britzke, Max; Herold, Jan; Wagenführ, André: Neue Ansätze zum Spiralwickeln: Weiterentwicklung der Wickeltechnologie zur Herstellung leichter Hülsen in Sandwichbauweise. In: Tagungsband des 2. Möbelleichtbau-Symposiums an der Hochschule Ostwestfalen-Lippe (2012)

Britzke, Max; Siegel, Carolin; Wagenführ, André: Three-dimensional formed sandwich parts for interior applications. In: Proceedings of the 14th International Panel Products Symposium IPPS 2011, Llandudno, Großbritannien (2011)

Britzke, Max: Ein Verfahren zur kontinuierlichen Herstellung leichter Sandwichplatten. In: Tagungsband des 9. Holzwerkstoff-Kolloquium „Klasse statt Masse“, Dresden (2011)

Britzke, M.; Wagenführ, A.: Sandwichplatten mit Papierwabenkern für den Möbel- und Innenausbau – Plattenbauweisen und Herstellungsverfahren – Teil 2: Verfahren zur Plattenherstellung. In: holztechnologie 52 (2011), Nr. 2, S. 32–37

Britzke, M.; Wagenführ, A.: Sandwichplatten mit Papierwabenkern für den Möbel- und Innenausbau – Plattenbauweisen und Herstellungsverfahren – Teil 1: Leichtbau und Papierwabenkerne. In: holztechnologie 52 (2011), Nr. 1, S. 27–30

Britzke, M.; Herold, J.; Korn, C.; Delenk, H.; Wagenführ, A.: New ideas for producing and processing lightweight furniture sandwich panels. In: Proceedings of the International Conference on Lightweight Panels „Think Light“, Hannover, 2011 (2011)

Britzke, Max ; André, Wagenführ (Hrsg.): Entwicklung einer kontinuierlich herstellbaren Sandwichplatte mit Papierwabenkern. Schriftenreihe Holz- und Papiertechnik, Band 8. Dresden : Selbstverlag, Institut für Holz- und Papiertechnik (2011). - ISBN 978-3-86780-255-0

Wagenführ, A.; Britzke, M.: Verfahrens- und Technologieentwicklung für den Möbel- und Innenausbau: Kontinuierliche Herstellung von Sandwich- Leichtbauplatten mit Papierwabenkern. In: Dresdner Transferbrief 18 (2010), Nr. 3, S. 22

Britzke, Max: Automatisierte Fertigungsverfahren für Sandwichplatten mit Papierwabenkern. In: Tagungsband des 1. Möbel-Leichtbau-Symposiums, Hochschule Ostwestfalen-Lippe in Lemgo (2010)

Britzke, Max; Herold, Jan; Korn, Christian; Wagenführ, André; Delenk, Hubertus; Flechtner, Anton: Continuous in-line production of sandwich panels with paper honeycomb core. In: Proceedings of the 14th European Conference on Composite Materials ECCM, Budapest (Ungarn) (2010)

Britzke, Max; Herold, Jan: Anforderungen an Sandwichplatten mit Papierwabenkern für den Möbel- und Innenausbau. In: Tagungsband 8. Möbeltage, Dresden (2010)

Britzke, Max; Herold, Jan; Korn, Christian; Wagenführ, André: The continuous production of sandwich panels with paper honeycomb core for furniture applications. In: Proceedings 13th International Panel Products Symposium IPPS 2009, Nantes (Frankreich) (2009)

Britzke, Max; Herold, Jan; Korn, Christian; Wagenführ, André: Konzepte für die Herstellung und Bearbeitung neuartiger, leichter Sandwichplatten mit dünnen Decklagen und Papierwabenkern. In: Tagungsband 7. Internationales Symposium „Werkstoffe aus nachwachsenden Rohstoffen“ Narotech 2009, Erfurt (2009)

Britzke, Max; Herold, Jan; Wagenführ, André: „Kehlnaht-Werkzeug“ als neue Technologie. In: HK Holz und Kunststoffbearbeitung 43 (2008), Nr. 6, S. 110

Britzke, Max; Herold, Jan; Wagenführ, André: Kräfte gezielt einleiten. In: HK Holz und Kunststoffbearbeitung 42/6 (2007), S. 40–45

Herold, J.; Rehm, K.; Kröppelin, U.; Britzke, M.: Neues Verfahren zum Erzeugen von Krafteinleitungspunkten in leichten Sandwichplatten mit Papierwabenkern. In: holztechnologie (2006)

Herold, J.; Rehm, K.; Kröppelin, U.; Britzke, M.: Temperaturverhalten von Thermoglättwerkzeugen. In: HOB Die Holzbearbeitung (2006)

Diese Informationen werden vom Vorgängersystem FIS bereitgestellt.

Bunk, Norbert; Dipl.-Ing.

Portät Norbert Bunk

Processing Systems

Dipl.-Ing. Norbert Bunk

Sealing and Forming of polymer Packaging Materials

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 220 Bergstr. 120

01069 Dresden

work Tel.

Publications

12 Entries

2022

Consideration of rheological processes during the welding of plastics by means of numerical simulation and microscopic analysesBunk, N., Majschak, J., Hüllmann, A. & Gehde, M., Oct 2022, In: Joining plastics = Fügen von Kunststoffen / Hrsg.: DVS, Deutscher Verband für Schweißen und Verwandte Verfahren e.V.. 2022, Issue 3, p. 174-181Electronic (full-text) versionResearch output: Contribution to journal > Research article
Charakterisierung und Modellierung des Phasenüberganges bei ThermoplastenBunk, N., 11 Mar 2022Research output: Contribution to conferences > Presentation slides

2021

Rheologische Vorgänge beim Schweißen (Schmelzefluss)Bunk, N., Hüllmann, A., Majschak, J. & Gehde, M., 4 Nov 2021Research output: Contribution to conferences > Paper
Rheologische Vorgänge beim Schweißen (Schmelzefluss)Bunk, N., Hüllmann, A., Majschak, J. & Gehde, M., 4 Nov 2021Research output: Contribution to conferences > Presentation slides
The effect of flexible sealing jaws on the tightness of pouches made from mono-polyolefin films and functional papersHauptmann, M., Bär, W., Schmidtchen, L., Bunk, N., Abegglen, D., Vishtal, A. & Wyser, Y., 6 Jan 2021, In: Packaging Technology and Science. 2021, 34(3), p. 175-186, 12 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2020

The sealing behavior of new mono‐polyolefin and paper‐based film laminates in the context of bag form‐fill‐seal machinesHauptmann, M., Bär, W., Schmidtchen, L., Bunk, N., Abegglen, D., Wyser, Y. & Vishtal, A., 1 Nov 2020, In: Packaging Technology and Science. 2020, 34(2), p. 117-126Research output: Contribution to journal > Research article

2018

Process for stretching flat semifinished productsLudat, N. & Bunk, N., 16 Apr 2018Research output: Contribution to conferences > Presentation slides

2015

Prozesssimulation beim Siegeln und ThermoformenBach, S., Stein, M., Bunk, N. & Majschak, J., 2015, p. 237-250, 14 p.Electronic (full-text) versionResearch output: Contribution to conferences > Paper

2014

Influences of geometric parameters and materials on the tightness of ultrasonic sealed flexible packagesStein, M., Bunk, N., Bach, S. & Majschak, J., 2014Research output: Contribution to conferences > Presentation slides

2013

Effect of Laminate Structure and Morphology on Fracture Mechanics and Seam Strength of Sealed SeamsBach, S., Bunk, N. & Majschak, J., 2013Research output: Contribution to conferences > Presentation slides

Heide, Matti; Dipl.-Ing.

Porträt Matti Heide

Cleaning Technologies

Dipl.-Ing. Matti Heide

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 221 Bergstr. 120

01069 Dresden

Deutschland

work Tel.

Research Focus

Chocolate-specific simulation model for flushing processes in closed systems – SchokoSIM

Publications

6 Entries

2024

Experimental studies of the flushing process of chocolate fluids in a test facilityHeide, M., Liebmann, V., Kricke, S., Rüdiger, F., Majschak, J. & Köhler, H., 2024, Proceedings of 15th International Conference on Heat Exchanger Fouling and Cleaning 2024. p. 140-150Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Extension of a simplified physical flushing model to realistic fluid property variation of chocolatesLiebmann, V., Heide, M., Golla, C., Köhler, H., Rüdiger, F. & Fröhlich, J., 2024, Proceedings of 15th International Conference on Heat Exchanger Fouling and Cleaning 2024Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Reinigungssimulation: Möglichkeiten und Herausforderungen - Einblick in den aktuellen Stand der Forschung der TU DresdenKöhler, H., Golla, C., Liebmann, V., Heide, M. & Rüdiger, F., 2024, Tagungsband zur 10. wissenschaftlichen Fachtagung Verarbeitungsmaschinen und Verpackungstechnik - VVD 2024. Dresden/Radebeul: Selbstverlag TU Dresden, p. 113-132Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution

2023

Improving flushing processes through targeted control of the temperature boundary conditionsLiebmann, V., Heide, M., Köhler, H., Rüdiger, F. & Fröhlich, J., 27 Nov 2023, Proceedings in Applied Mathematics and Mechanics. 4 ed., Wiley-VCH, Vol. 23Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Reduced cleaning model for highly viscous non-Newtonian fluids in pipelinesLiebmann, V., Heide, M., Köhler, H., Golla, C., Fröhlich, J. & Rüdiger, F., 18 Jul 2023, 33rd European Symposium on Computer Aided Process Engineering. Elsevier Science B.V., p. 325-330, 6 p.Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution

2022

Aspects of Modelling the Cleaning of a Chocolate With Yield Stress in a Pipe Using CFDLiebmann, V., Heide, M., Schoppmann, K., Köhler, H. & Rüdiger, F., 2022, Proceedings of the International Conference on Fouling & Cleaning in Food Processing 2022Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution

Helbig, Manuel; Dipl.-Ing.

Porträt Manuel Helbig

Cleaning Technologies

Dipl.-Ing. Manuel Helbig

Wissenschaftlicher Mitarbeiter

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 102 Bergstr. 120

01069 Dresden

Deutschland

work Tel.

Research Focus

Factors influencing the cleaning processes in the food industry
Collaboration in the project “Cleaning mechanisms of immerged systems”
Concluded projects:
- “Optimizing of cleaning processes by means of process description and dimensionless numbers 1 + 2”
- “Cleaning of Dead Spaces”
- “Enhancement of cleaning-in-place efficiency using pulsed flow 1+ 2”
- “Development of a water jet tester for verifications according to DIN EN ISO 16925 as a portable measuring device”
- "Increasing the resource efficiency of cleaning processes in food industry with modular model soil - ReMoVe"

Teaching

Responsible for the following courses:
- Cleaning technology and industrial hygiene (MB-VTMB-28)
- Safety and hygiene aspects of processing machines (MB-VTMB-28)

Publications

19 Entries

2024

Modellverschmutzungen statt Riboflavin-Test: Nachbildung des Reinigungsverhaltens realer MilchprodukteHelbig, M. & Hovorka, K., 4 Jun 2024, In: Lebensmittel-Brief / Lebensmittel-Informationsdienst GmbH. 35., Mai / Juni 2024, p. 14, 17 p.Research output: Contribution to journal > Research article
Investigating the cleaning mechanism of film-like soils using fully convolutional networksGolla, C., Boddin, L., Helbig, M., Köhler, H., Rüdiger, F. & Fröhlich, J., 28 Feb 2024, In: Food and bioproducts processing. 145, p. 78-96, 19 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2023

Reinigung im Visier: Analyse des Reinigungsverhaltens von Milchprodukten zur Entwicklung von TestverschmutzungenHelbig, M., Hovorka, K., Schmidt, C. & Zahn, S., Jul 2023, In: Molkerei-Industrie : Fachmagazin für die Milchverarbeitung. 2023, 7, p. 26-30Electronic (full-text) versionResearch output: Contribution to journal > Research article
Reinigung im Visier: Analyse des Reinigungsverhaltens von Milchprodukten zur Entwicklung von TestverschmutzungenHelbig, M., Hovorka, K., Schmidt, C. & Zahn, S., Jun 2023, In: Rundschau für Fleischhygiene und Lebensmittelüberwachung : RFL. 75, 6, p. 208-211, 4 p.Research output: Contribution to journal > Research article

2022

Direct measurement of the cohesive strength of whey protein gel in contact with NaOH by wire cutting experimentsHelbig, M., Majschak, J. & Köhler, H., Nov 2022, In: Food and Bioproducts Processing. 136, 136, p. 141 - 153, 13 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Direct measurement of the cohesive strength of whey protein gel in contact with NaOH by wire cutting experimentsHelbig, M., Majschak, J. & Köhler, H., 28 Mar 2022, Proceedings - International Conference on Fouling and Cleaning in Food Processing 2022. Lille, 12 p.Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution

2021

Whey protein gel - mechanical cleaning capability through modelling and experimental testing including compression and wire cutting investigationLiu, J., Helbig, M., Majschak, J. & Böl, M., Mar 2021, In: Journal of Food Engineering. 292, 292, p. 110324, 110324Electronic (full-text) versionResearch output: Contribution to journal > Research article

2019

Laboratory methods to predict the cleaning behaviour of egg yolk layers in a flow channelHelbig, M., Zahn, S., Hovorka, K., Rohm, H. & Majschak, J., 2019, In: Food and Bioproducts Processing. 113, p. 108-117Electronic (full-text) versionResearch output: Contribution to journal > Research article

2018

Laboratory methods to predict the cleaning behaviour in a flow channel exemplified by egg yolk layerHelbig, M., Böttcher, K., Rohm, H., Zahn, S. & Majschak, J., 18 Apr 2018, Fouling and Cleaning in Food Processing 2018: ‘the food-water-energy challenge’. p. 149-166, 18 p.Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Dimensional analysis of cleaning-in-place processes for fouled organic material in food processesDeponte, H., Helbig, M., Gottschalk, N., Föste, H., Majschak, J., Augustin, W. & Scholl, S., 17 Apr 2018, Fouling and Cleaning in Food Processing 2018. p. 167 - 174, 7 p.Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution

Hofmann, André; Dipl.-Ing.

Porträt André Hofmann

Processing Systems

Dipl.-Ing. André Hofmann

Forming of fibre-based Materials

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 224 Bergstr. 120

01069 Dresden

work Tel.

Research

ultrasonic treatment of fibre networks
forming of fibre networks with deep drawing anfd embioopssing technology
optimization of forming processes
development and optimization of tools and machinery for 3D-forming of fibre networks
recent projects
- Ultrasonic Enhanced Embossing - uSEE
- Untersuchungen zum ultraschallunterstützten Prägen von Lederwaren mit konventionellen Prägewerkzeugen und Prägewerkzeugen aus Kunststoff

Publications

8 Entries

2022

Influence of ultrasound on embossing results for cardboardHünniger, J., Engisch, L., käppeler, U., Hamblyn, S. & Hofmann, A., 22 Aug 2022, In: BioResources. 17, 4, p. 5803-5819, 17 p.Electronic (full-text) versionResearch output: Contribution to journal > Review article

2021

Chemical and morphological changes in fibre structure due to material heating during ultrasonic-assisted embossing of cardboardKäppler, U., Hünniger, J., Hofmann, A., Hamblyn, S., Berlich, A. & Engisch, L., 2021, In: BioResources. 16, 1, p. 546-557, 12 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2020

Material-dependent Ultrasonic Heating Behavior during the Reshaping of Dryed Paper WebsHofmann, A., Löwe, A. & Hauptmann, M., 2020, In: BioResources. 15, 3, p. 4947-4959, 13 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Thermal Influence on the Mechanical Properties of Cardboard during an Ultrasonic-Assisted Embossing ProcessKäppler, U., Hünniger, J., Hofmann, A., Berlich, A. & Engisch, L., 2020, In: BioResources. 15, 3, p. 5110-5121, 12 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Ultrasonic Induced Material Compression During the Gap-controlled Reshaping of Dry Paper Webs by Embossing or Deep DrawingHofmann, A. & Hauptmann, M., 2020, In: BioResources. 15, 2, p. 2326-2338, 13 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2019

Characterization of the material elongation in the deep drawing of paperboardHofmann, A., Wallmeier, M., Hauptmann, M. & Majschak, J., 2019, In: Packaging Technology and Science. 32, 6, p. 287-296, 10 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Temperature Development of Cardboard in Contact with High-Frequency Vibrating Metal SurfacesLöwe, A., Hauptmann, M., Hofmann, A. & Majschak, J., 2019, In: BioResources. 14, 2, p. 3975-3990, 16 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2017

The use and application of ultrasonic vibrations in the 3D deformation of paper and cardboardLöwe, A., Hofmann, A. & Hauptmann, M., 2017, In: Journal of Materials Processing Technology. 240, p. 23-32, 10 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

Kloß, Luca

Platzhalter für Portraitbild

Processing Systems

Luca Kloß

Lab Engineer

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, room 225 Bergstraße 120

01069 Dresden

Deutschland

work Tel.

Knobloch, Kai; Staatl. gepr. Techniker

Platzhalter für Portraitbild

Kai Knobloch , Staatl. gepr. Techniker

Send email

Chair of Processing Machines and Processing Technology

work

Visiting address:

Hauptgebäude ZIN Bergstr. 120

01069 Dresden

Sekretariat Frau Heidelinde Siegert

work Tel.

Köhler, Hannes; Dr.-Ing.

Hannes Köhler

Cleaning Technologies

Dr.-Ing. Hannes Köhler

Research Field Coordinator

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 221 Bergstr. 120

01069 Dresden

Deutschland

work Tel.

Research Focus

Modelling of Cleaning Processes
Collaboration in the IGF-project Experimentally supported basis models for a feasible numerical cleaning simulation 2
Concluded projects:
- Experimentally supported basis models for a feasible numerical cleaning simulation
- "Development of a process model for jet cleaning in the food industry 1 + 2"

Teaching

Exercise and practical support in the following courses:
- Cleaning technology and industrial hygiene (MB-VTMB-28)

Publications

55 Entries

2019

Simulation of jet cleaning: Diffusion model for swellable soilsJoppa, M., Köhler, H., Kricke, S., Majschak, J., Fröhlich, J. & Rüdiger, F., 2019, In: Food and Bioproducts Processing. 113, p. 168-176, 9 p.Electronic (full-text) versionResearch output: Contribution to journal > Conference article

2018

Development of a Method to Determine Normal and Shear Stress Necessary to Remove a Swollen Soil From a SurfaceMurcek, R., Schöhl, E., Köhler, H., Boye, A. & Gold, S., 2018, Fouling and Cleaning in Food Processing 2018: Proceedings of the conference in Lund, Sweden, April 17 – 20, 2018. p. 10, 1 p.Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Methode zur Untersuchung, Modellierung und Optimierung von Reinigungsprozessen mit kohärentem FlüssigkeitsstrahlKöhler, H., 2018Research output: Types of Thesis > Doctoral thesis
Simulation der Strahlreinigung: Diffusionsmodell für quellbare VerschmutzungenJoppa, M., Köhler, H., Kricke, S., Majschak, J., Fröhlich, J. & Rüdiger, F., 2018, p. 469-486, 18 p.Electronic (full-text) versionResearch output: Contribution to conferences > Paper
Simulation of Jet Cleaning: Diffusion Model for Swellable SoilsJoppa, M., Köhler, H., Kricke, S., Majschak, J., Fröhlich, J. & Rüdiger, F., 2018, Proceedings of the International Conference on Fouling & Cleaning in Food Processing 2018: The food-water-energy challenge. Lipnizki, F., Wilson, D., Chew, Y. & Jönsson, A. (eds.).p. 359-372, 14 p.Research output: Contribution to book/conference proceedings/anthology/report > Conference contribution

2017

Experiments and Simulations on the Cleaning of a Swellable Soil in Plane Channel FlowJoppa, M., Köhler, H., Rüdiger, F., Majschak, J. & Fröhlich, J., 2017, In: Heat Transfer Engineering. 38, 7-8, p. 786-795, 10 p.Electronic (full-text) versionResearch output: Contribution to journal > Conference article
Prediction of cleaning by means of Computational Fluid Dynamics: Implication of the pre-wetting of a swellable soilJoppa, M., Köhler, H., Rüdiger, F., Majschak, J. & Fröhlich, J., 2017, Proceedings of the 12th International Conference on Heat Exchanger Fouling and Cleaning XII – 2017: June 11-16, 2017 Aranjuez (Madrid), Spain. Zettler, H. U. (ed.).8 p., 34Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution

2016

Study on the Application of Cleaning Models From High Speed Water Jets to the Working Ranges of CIP-ProcessesKöhler, H., Stoye, H., Weyrauch, T., Boye, A., Mauermann, M. & Majschak, J., 2016, In: Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta Josipa Jurja Strossmayera u Osijeku = Technical gazette : scientific professional journal of technical faculties of the Josip Juraj Strossmayer University of Osijek. 23, 2, p. 349-355, 7 p.Electronic (full-text) versionResearch output: Contribution to journal > Conference article

2015

Cleaning of a Model Food Soil From Horizontal Plates by a Moving Vertical Water JetWilson, D., Köhler, H., Cai, L., Majschak, J. & Davidson, J., 2015, In: Chemical Engineering Science. 123, p. 450-459, 10 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Cleaning of Food Fouling Layers From Tank Walls by Impinging Liquid JetsWilson, D., Davidson, J., Wang, T., Köhler, H. & Majschak, J., 2015, EHEDG Yearbook 2015/2016: European Hygienic Engineering & Design Group. p. 92-94, 3 p.Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Chapter in book/Anthology/Report

Kricke, Sebastian; Dipl.-Ing.

Foto: Porträt Sebastian Kricke

Cleaning Technologies

Dipl.-Ing. Sebastian Kricke

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 221 Bergstr. 120

01069 Dresden

Deutschland

work Tel.

Research Focus

Soil-specific cleaning behaviour
Collaboration in the IGF-project “Identification of physical-chemical properties of soils for structure-based cleaning optimisation in the food industry 2”
Supporting the ERDF project: “Material Hub” in cooperation with SLUB Dresden

Teaching

Exercise and practical support in the following courses:
- Cleaning technology and industrial hygiene (MB-VTMB-28)

Publications

12 Entries

2024

Experimental studies of the flushing process of chocolate fluids in a test facilityHeide, M., Liebmann, V., Kricke, S., Rüdiger, F., Majschak, J. & Köhler, H., 2024, Proceedings of 15th International Conference on Heat Exchanger Fouling and Cleaning 2024. p. 140-150Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution

2023

Influence of rheological properties and pull‑off forces of native and modified starches on cleaning in plane channel flowKricke, S., Berger, C., Zahn, S., Köhler, H., Rohm, H. & Majschak, J., 7 Jul 2023, In: International Journal of Heat and Mass Transfer. 60, 5, p. 861-870, 10 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Identification of cleaning mechanism by using neural networksGolla, C., Freiherr Marschall, W., Kricke, S., Rüdiger, F., Köhler, H. & Fröhlich, J., Mar 2023, In: Food and Bioproducts Processing. 138, p. 86-102, 17 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article

2022

Effect of Physicochemical Properties of Native Starches on Cleaning in Falling Film and Plane Channel Flow ExperimentsKricke, S., Böttcher, K., Zahn, S., Majschak, J. P. & Rohm, H., 2022, In: Heat transfer engineering. 43, 15-16, p. 1416-1425, 10 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Influence of the Rheological Properties and Pull-off Forces of Native and Modified Starches on Cleaning in Plane Channel FlowKricke, S., Berger, C., Zahn, S., Köhler, H., Rohm, H. & Majschak, J., 2022, 10 p.Electronic (full-text) versionResearch output: Book/Report/Anthology > Conference proceeding
Schmutz im Fokus: Analyse reinigungsrelevanter Schmutzeigenschaften zur bedarfsgerechten Anpassung von ReinigungsprozessenZahn, S. & Kricke, S., 2022, In: Food-Lab : food analytics, legislation, QM in processing. 2022, 4, p. 27-31Electronic (full-text) versionResearch output: Contribution to journal > Research article

2019

Effect of physicochemical properties of native starches on cleaningZahn, S., Böttcher, K., Kricke, S., Majschak, J. & Rohm, H., 2019Electronic (full-text) versionResearch output: Contribution to conferences > Paper
Simulation of jet cleaning: Diffusion model for swellable soilsJoppa, M., Köhler, H., Kricke, S., Majschak, J., Fröhlich, J. & Rüdiger, F., 2019, In: Food and Bioproducts Processing. 113, p. 168-176, 9 p.Electronic (full-text) versionResearch output: Contribution to journal > Conference article

2018

Effect of industrial scale stand-off distance on water jet break-up, cleaning and forces imposed on soil layersFuchs, E., Kricke, S., Schöhl, E. & Majschak, J., 2018, In: Food and Bioproducts Processing. 2019, 113, p. 129-141, 13 p.Electronic (full-text) versionResearch output: Contribution to journal > Research article
Influence of the nozzle distance on the cleaning result compared to the jet break up and the mechanical forces on an industrial scaleFuchs, E., Kricke, S., Schöhl, E. & Majschak, J., 2018, p. 341-358, 18 p.Research output: Contribution to conferences > Paper

Pfeiffer, Stephan; Dipl.-Ing.

Portät Stephan Pfeiffer

Processing Systems

Dipl.-Ing. Stephan Pfeiffer

Sealing and Forming of polymer Packaging Materials

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 220 Bergstr. 120

01069 Dresden

work Tel.

Research

Sealing and Forming of polymer packaging materials
current research project "Measurement setup for inline material characterization for a material model of the thermoforming simulation"

Publications

The FIS cannot provide any results for the selected parameters.

Rosenbusch, Phillip; Dipl.-Ing.

Platzhalter für Portraitbild

Processing Systems

Dipl.-Ing. Phillip Rosenbusch

Natural Fiber Based Functional Structures

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 216 Bergstr. 120

01069 Dresden

work Tel.
fax Fax: +49 351 463-37142

Research

Publications

3 Entries

2024

3D-Forming of Extruded Seaweed FilmRosenbusch, P., Berthold, L. & Schmidtchen, L., 27 May 2024Electronic (full-text) versionResearch output: Contribution to conferences > Poster

2019

Adhesive free paper honeycomb core and related manufacturing process for use in environmentally friendly sandwich panelsBritzke, M. & Rosenbusch, P., 2019Research output: Contribution to conferences > Paper
Neuartige, klebstofffreie PapierwabenstrukturRosenbusch, P. & Britzke, M., 2019Research output: Contribution to conferences > Paper

Schmidtchen, Ludwig; Dipl.-Ing.

Platzhalter für Portraitbild

Packstoffe aus Makroalgen

Mr Dipl.-Ing. Ludwig Schmidtchen

external doctoral student

Send email

Chair of Processing Machines and Processing Technology

work

Besucheradresse:

Hauptgebäude ZIN, ZIN 225 Bergstr. 120

01069 Dresden

work Tel.

Publications

Diese Informationen werden vom Vorgängersystem FIS bereitgestellt.

Schubert, Holger; Dipl.-Ing.

Platzhalter für Portraitbild

Processing Systems

Dipl.-Ing. Holger Schubert

Forming of Fibre Based Materials

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, room 225 Bergstraße 120

01069 Dresden

Deutschland

work Tel.

Research

biodegradable functional barrier layers
coating systems for 3D deep-drawn packages
forming and embossing of fiber networks
development of forming tools and tool systems for resizing deep-drawn fiber networks

Publications

5 Entries

2024

A thermo-hygro-mechanical material model for paper and paperboardKopic-Osmanovic, M. N., Schubert, H., Simon, J. & Hauptmann, M., 11 Sep 2024, INTERNATIONAL PAPER PHYSICS CONFERENCE 2024: Book of Abstracts. Wuppertal: Bergische Universität Wuppertal , p. 24-25Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Universal method for predicting the formability of paper- based materials in deep drawing and hydroformingHiller, B., Schubert, H., Brunk, C., Zahel , M., Hauptmann, M. & Groche, P., 11 Sep 2024, p. 47Electronic (full-text) versionResearch output: Contribution to conferences > Poster
Sprühbare Barriereschichten für Karton auf Basis von Polyvinylakohol und mikrokristalliner CelluloseJanßen, H. C., Berthold, L., Schubert, H., Blumrich, J. & Fischer, S., 21 Mar 2024, VVD 2024 Verarbeitungsmaschinen und Verpackungstechnik: Tagungsband : Herausforderung Komplexität. Dresden: Technische Universität Dresden, p. 253-264Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Universelle Methode zur Vorhersage der Umfombarkeit von papierbasierten Materialien im Tiefzeihen und HydroformingHiller, B., Brunk, C., Schubert, H., Zahel , M., Groche, P. & Hauptmann, M., 21 Mar 2024, VVD 2024 Verarbeitungsmaschinen und Verpackungstechnik: Tagungsband : Herausforderung Komplexität. Dreden: Technische Universität Dresden, p. 239-252Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution

2023

Modeling the influence of temperature and moisture on the elasto-plastic behavior of paper and paperboardKopic-Osmanovic, N., Schubert, H., Rief, S., Orlik, J., Andrä, H., Hauptmann, M. & Simon, J., 5 Sep 2023, XVII International Conference on Computational Plasticity. Fundamental and Applications : Complas 2023. Barcelona, Spain: International Centre for Numerical Methods in EngineeringElectronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution

Siegert, Heidelinde; Sekretariat

Platzhalter für Portraitbild

Secretary

Heidelinde Siegert

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 103 Bergstr. 120

01069 Dresden

work Tel.
work Tel.

Steinert, Georg; Dipl.-Ing.

Foto: Porträt Georg Steinert

Processing Systems

Dipl.-Ing. Georg Steinert

Motion Technology

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 106 Bergstr. 120

01069 Dresden

Deutschland

work Tel.

Research

Product and cycle rate adapted motion design of the Pick & Place technology
current project: Significantly increased efficiency of a final packaging system - GRAND

Publications

2 Entries

2024

Bewegungsoptimierung bei Pick-and-Place ProzessenSteinert, G. & Jensen, U., 2024, Tagungsband zur 10. wissenschaftlichen Fachtagung Verarbeitungsmaschinen und Verpackungstechnik - VVD 2024 . Selbstverlag TU Dresden, p. 29-44Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution
Untersuchung von Methoden zur Synthese von Pick-and-Place BewegungenSteinert, G. & Majschak, J., 2024, Getriebetagung 2024. München, 26.-27. September 2024. Lüth, T., Berger, M. & Corves, B. (eds.). Logos Verlag, Berlin, p. 65-77Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Conference contribution

Tietze, Sven; Dr.-Ing.

Platzhalter für Portraitbild

Dr.-Ing. Sven Tietze

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, 107 Bergstraße 120

01069 Dresden

work Tel.

Publications

5 Entries

2020

Controlling liquid slosh by applying optimal operating-speed-dependent motion profilesTroll, P. C., Tietze, S. & Majschak, J., 1 Mar 2020, In: Robotics : open access journal. 9, 1, 18 p., 18Electronic (full-text) versionResearch output: Contribution to journal > Research article

2019

Investigation on the Application of Operating Speed Dependent Motion Profiles in Processing Machines at the Example of Controlling Liquid Slosh.Troll, P. C., Tietze, S. & Majschak, J., 2019, 10 p.Electronic (full-text) versionResearch output: Other contribution > Other
Modelling of Oblique Wire Cutting and Experimental Application on Soft Solid Foods for the Investigation of Friction Behaviour.Witt, T., Holländer, Y., Tietze, S. & Majschak, J., 2019, In: Journal of Food QualityElectronic (full-text) versionResearch output: Contribution to journal > Research article

2018

Bewegungstechnik & Bewegungsdesign für VerarbeitungsmaschinenTietze, S. & Majschak, J., 2018, Qucosa. Neuerscheinung ed., DresdenElectronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Chapter in book/Anthology/Report

2017

Minimierung ungewollter Bewegungen in Verarbeitungs- und Textilmaschinen. Methoden und Beispiele in der Lehre.Tietze, S., Hanke, U. & Speicher, T., 2017, p. 65-88, 24 p.Research output: Contribution to conferences > Paper

Weiß, Uta; Dr.-Ing.

Foto Frau Dr. Weiß

Dr.-Ing. Uta Weiß

Send email

Chair of Processing Machines and Processing Technology

work

Visitor Address:

Hauptgebäude ZIN, ZIN 108 Bergstr. 120

01069 Dresden

work Tel.

Publications

11 Entries

2024

Verpackungs- und VerladetechnikWeiß, U., 2 Jul 2024, Handbuch Logistik. Furmans, K., Henke, M., Tempelmeier, H., Hompel, M. T. & Schmidt, T. (eds.). 4. ed., Berlin, Heidelberg: Springer Vieweg Berlin, Heidelberg, 67 p.Electronic (full-text) versionResearch output: Contribution to book/conference proceedings/anthology/report > Chapter in book/Anthology/Report

2022

Verpackungstechnische Möglichkeiten für die Praxis/ Aufbau des maschinellen verpackungstechnischen Prozesses und seine GrundlagenWeiß, P. D. M., Weiß, U., Schwarz, M., Kosmann, F. & Allaki, T., 2022, DLG-Qualitätsatlas für Verpackung von Fleisch und Fleischerzeugnissen. DLG e.V., Arbeitskreis Verpackung in der Supply Chain (ed.). Neuerscheinung ed., Frankfurt: DLG-Verlag, 75 p.Research output: Contribution to book/conference proceedings/anthology/report > Chapter in book/Anthology/Report

2020

Verpackungsentsorgung und KreislaufwirtschaftWeiß, U., 2020, Grundlagen der Verpackung. Kaßmann, M. (ed.). 3. ed., Berlin: Beuth Verlag, p. 357-378, 21 p.Research output: Contribution to book/conference proceedings/anthology/report > Chapter in book/Anthology/Report

2017

Schutzfunktion der VerpackungWeiß, U., 2017, Verpackungstechnik: Mittel und Methoden zur Lösung der Verpackungsaufgabe. Hennig, J. (ed.). Beuth VerlagResearch output: Contribution to book/conference proceedings/anthology/report > Chapter in book/Anthology/Report

2015

Kommunikationsfunktion der VerpackungWeiß, U. & Otto, C., 2015, Verpackungstechnik: Mittel und Methoden zur Lösung der Verpackungsaufgabe. Hennig, J. (ed.). Beuth VerlagResearch output: Contribution to book/conference proceedings/anthology/report > Chapter in book/Anthology/Report
Mensch-Maschine-EINSystemWeiß, U. & Joiko, K., 2015Research output: Contribution to conferences > Poster
Rationalisierungsfunktion der VerpackungWeiß, U., 2015, Verpackungstechnik: Mittel und Methoden zur Lösung der Verpackungsaufgabe. Hennig, J. (ed.). Beuth VerlagResearch output: Contribution to book/conference proceedings/anthology/report > Chapter in book/Anthology/Report

2014

Beiträge in NachschlagewerkWeiß, U. & Majschak, J., 2014, Lexikon Verpackungstechnik. Bleisch, G., Langowski, H. & Majschak, J. (eds.). 2. ed., Hamburg: Behr'sResearch output: Contribution to book/conference proceedings/anthology/report > Entry for encyclopedia/Dictionary

2011

Verpackungstechnische ProzesseBleisch, G., Majschak, J. & Weiß, U., 2011, Neuerscheinung ed., Hamburg: Behr's, 591 p.Research output: Book/Report/Anthology > Monograph

2010

Packaging materials and equipmentSchneider, Y., Kluge, C., Weiss, U. & Rohm, H., 2010, Technology of Cheesemaking. London: Wiley-Blackwell, Oxford [u. a.], p. 413-439Research output: Contribution to book/conference proceedings/anthology/report > Chapter in book/Anthology/Report

Lena Berthold

Last modified: Jul 01, 2022