Synthetic fiber spinning machines

Bikomponenten-Schmelzspinnanlage — Bicomponent melt spinning machine

Technical Data	Features
Manufacturer: DIENES Apparatebau GmbH Double and single screw extruder (up to 15 kg/h and 450 °C) Spin pack: monocomponents, bicomponents (Island in the sea, side by side, sheath core) 5 godet duos, up to 3500 m/min Winders	Processing of thermoplastic high performance polymers, such as PEEK, PAI andPEI as well as Lignin Modular and flexible system technology Planned extension to monofilament and dry spinning System technology comprising the entire process chain for the manufacturing of tailored carbon fibers within the „Research Center Carbon Fibers Saxony (RCCF)”

Piston solvent spinning machine

Foto auf dem eine Kolben- Lösungsspinnanlage zu sehen ist — Piston solvent spinning machine

Technical data	Features
manufacturer: Fourné Maschinenbau GmbH max. volume of storage tank: 1558 cm³, heatable to up to 120 °C throughput: 0.68 to 7.49 cm³/min heatable (to up to 80 °C) coagulation bath 90 l, heatable 20 l storage tank heatable (90 °C) elongation washing bath 30 l, heatable 20 l storage tank roller contact dryer, max. 240 °C three roller duos, speed between 3 and 50 m/min preparation roller made of sintered corundum SAHM cross coil winder, 5 to 50 m/min	air gap unit machine is located in a clean room (class ISO 7/GMP C), thus enabling the manufacturing of textile yarns for medical and other technical applications maximum pressure of 80 bar is feasible in the storage tank of the spinning solution

Technical data

Features

manufacturer: Fourné Maschinenbau GmbH
max. volume of storage tank: 1558 cm³, heatable to up to 120 °C
throughput: 0.68 to 7.49 cm³/min
heatable (to up to 80 °C) coagulation bath 90 l, heatable 20 l storage tank
heatable (90 °C) elongation washing bath 30 l, heatable 20 l storage tank
roller contact dryer, max. 240 °C
three roller duos, speed between 3 and 50 m/min
preparation roller made of sintered corundum
SAHM cross coil winder, 5 to 50 m/min

air gap unit
machine is located in a clean room (class ISO 7/GMP C), thus enabling the manufacturing of textile yarns for medical and other technical applications
maximum pressure of 80 bar is feasible in the storage tank of the spinning solution

Laboratory wet spinning system

Labor - Nassspinnanlage — Laboratory wet spinning system

Technical Data	Features
manufacturer: Fourné Polymertechnik GmbH 100 l initial solution container, 100 l supply tank, 3 l supply tank, 2 filtration systems, spinning section with spinning pump, pipe and jet, coagulation bath, 6 godet roll triplets, 3 wash/elongation baths, 2 hot-air dryers, preparation roller, winder	manufacture of textile yarns for medical application possible by means of shielded spinning, coagulation and elongation/washing units system technology comprising the entire process chain for the manufacturing of tailored carbon fibers within the „Research Center Carbon Fibers Saxony (RCCF)”

In addition to the bicomponent melt spinning machine and the solvent wet spinning machine, there is further state-of-the-art machinery available at the „Research Center Carbon Fibers Saxony (RCCF)” for the manufacturing of tailored carbon fibers.

Stabilisierungsanlage — © Lichtwerke Design Fotografie

Carboniserungsanlage — © Lichtwerke Design Fotografie

Stabilisierungs- und Carbonisierungslinie im Carbonfaser-Technikum des RCCF2 — © Lichtwerke Design Fotografie

Including:

Synthetic fiber spinning machines

About this page

Finden!